ORTEK TN-100 Bluetooth Player Car Stereo User Manual

ORTEK TN-100 Bluetooth Player Car Stereo

Product Information

Specifications

• RADIO: Frequency range 522KHz~1620KHz, Practical sensitivity MAX 37dB, S/N MIN 43dB
• MP3: Frequency loudness 20Hz~20KHz, USB Port USB 2.0, S/N MIN 40dB, USB Port charging 5V/2A5V/0.5A
• BT: Output power 4dBm, MIC sensitivity -52dB, Frequency 2.45GHz, Bluetooth version 5.0, Transmission range MIN 10m
• OTHER: D.C.Voltage Output Power 12V/24V MAX 25W*2CH, Resistance 4/8, Operating temperature range -30~70

Product Usage Instructions

RADIO Usage

1. To use the radio function, select the desired frequency within the range of 522KHz to 1620KHz.
2. Adjust the sensitivity settings for optimal reception with a minimum S/N ratio of 43 dB.

MP3 Player Usage

1. Connect your MP3 player to the USB port using a USB 2.0 cable.
2. Ensure the frequency loudness is within the range of 20Hz to 20KHz for optimal audio playback.

Bluetooth Functionality

1. Enable Bluetooth on your device and pair it with the car stereo within a transmission range of at least 10 meters.
2. Adjust the output power and sensitivity settings for microphone usage.

Additional Features

1.  Utilize the D.C. Voltage output power for external devices with a maximum of 25W per channel.
2. Ensure proper resistance settings based on your speaker configuration (4/8 ohms).

Frequently Asked Questions

Q: What should I do if the car stereo gets hot during extended usage?
A: In case the chassis gets hot during long working hours, refrain from touching it as it is normal under high power output states.

Q: Can I dismantle the machine for maintenance purposes?
A: Unauthorized dismantling of the machine may void the warranty. Please contact authorized personnel for maintenance.

Warning:
Please read this manual carefully when using it for the first time to familiarize yourself with the operation of the machine, and please keep this manual for future reference.

FEATURE

Tn-100 is a CAN communication car audio system. Includes digital tuning radio, USB/AUX/MIC/MP3/WMA/Bluetooth/CAN communication, clock, electronic volume, call a display phone number, and other functions。

CONTROL EXPLAINED

Explain：

1. The instrument/other equipment sends information to the radio through CAN protocol, and the radio feeds back information to the instrument/other equipment
2. The instrument/instrument control knob controls the radio
3. USB/AUX/MIC leads from the radio to communicate with the radio through the module. The module is named TN‐301 by our company.
4. The radio plays through loudspeakers and receives FM/AM broadcast signals from an antenna.

STANDARD COMPATIBILITY

1. CAN 2.0B
2. J19399

PROTOCOL FUNCTION

1. Power on/off
2. EQ switch（TRE/BAS/BAL)
3. Mode switch（BT/USB/AUX/RADIO)
4. AM/FM switch
5. Mute on/of
6. Loud on/off
7. Auto seek and save stations
8. Volume +/‐
9. Previous station/Next station
10. Frequency + 1step/Frequency ‐ 1step
11. Previous track/Next track,
12. Fast forward/Fast backward
13. Save as station1/MPS Pause
14. Save as station2/MP3 Tracks preview
15. Save as station3/MP3 Tracks repeat
16. Save as station4/MP3 Tracks random
17. Save as station5/MP3 Previous 10th track/hang cel
18. Save as station6/MP3 Next 10th track/pick / hang cell

OPERATIONS

The radio mode function description

• Select M1，M2，M3，M4，M5 and M6 to listen through the can control
• is used for switching between radio bands FM1, FM2, FM3, AM1, AM2 and AM3
• to auto-scan all stations and store them to preset function keys.

Inter‐countries band setting

inter-countries band setting

Under Power Off mode, input the below| ‘0’| China / Europe Band
commands in sequences:| ‘2’| Middle East Band
‘e’  +    ‘c’  +    ‘m’  +    ‘o’  +| ‘4’| America Band
 | ‘6’| Japan Band
The above operation should be done in| ‘8’| Russia Band
sequence and less than 5 seconds between|  |
Each command.|  |

Note： Other functional parameters CAN protocol

TECHNICAL SPECIFICATIONS

FM

AM

MP3

BT

OTHER

Note： if any change in technology parameters , shall take real product as criterion.No information will be made

TROUBLESHOOTING

1. Please set a reasonable volume to avoid traffic accidents.
2. Please keep this machine in your vehicle when the weather is extremely hot or cold.
3. Prevent the machine from being damped by water when washing your vehicle.
4. After long working hours under a great power output state, the chassis will get hot. Though it is not a defect, you are suggested not to touch it.
5. We will provide warranty service in the precondition of non‐artificial damage. The unauthorized maintainer is not allowed to dismantle the machine, otherwise, the warranty will be void.
6. This manual is for reference only. The product may differ slightly from the description in this manual.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help with important announcements.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Address ： Bridge 16 southern, Caoan Road, Jiading District, Shanghai P.C：201812 T： 021-39117568, 021-39117569 F： 201-39117573#8031

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>