nedis SEST250BK Selfie Stick User Guide

Quick start guide
SEST250BK

Selfie Stick
For more information see the extended manual online: ned.is/sest250bk

Intended use

The SEST250BK is a smartphone holder that allows you to take selfies from a greater distance. The product is not intended for professional use. Any modification of the product may have consequences for safety, warranty, and proper functioning.

Specifications

Main parts (image A)

|
---|---
1. Smartphone holder
2. Telescopic rod
3. Status indicator LED| 4. Photo button
5. Battery compartment
---|---

Safety instructions

WARNING

• Always keep button cell batteries, both full and empty, out of reach of children to avoid the chance of swallowing. Dispose of used batteries immediately and safely. Button cell batteries can cause serious internal chemical burns in as little as two hours when swallowed. Keep in mind that the first symptoms may look like child diseases like coughing or drooling. Seek immediate medical attention when you suspect that batteries have been swallowed.
• Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
• Do not expose the product to water or moisture.
• Do not dismantle, open or shred batteries.
• Do not expose batteries to heat or fire. Avoid storage in direct sunlight.
• Do not short-circuit a battery.
• Do not store cells or batteries haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects.
• Do not subject cells or batteries to mechanical shock.
• In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
• Only use the battery type(s) recommended in this document.
• Keep cells and batteries clean and dry.
• Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
• Do not remove a battery from its original packaging until required for use.
• Retain the original product literature for future reference.
• When possible, remove the battery from the product when not in use.
• Observe the plus (+) and minus (­) marks on the cell, battery and equipment and ensure correct use.
• Dispose of the cell or battery properly.

Bluetooth pairing

1. Press and hold the photo button A4 for 3 seconds. The status indicator LED A3 blinks to indicate the product is in pairing mode.
2. Enable Bluetooth on the device you want to pair the product with.
3. Select “SEST250BK” from the list of available
   Bluetooth devices on your device. A3 lights up green when pairing is successful.

Using the product

1. Place your smartphone into the smartphone holder A1.
2. Press A4 to take a picture. You can detach A4 and use it as a remote control.
3. Press and hold A4 for 3 seconds to switch off the product.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product SEST250BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/sest250bk#support

For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Nedis B.V., de Tweeling 28
5215 MC ‘s-Hertogenbosch, the Netherlands

ned.is/sest250bk

|
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>