ATEN VS182A 2/4-Port HDMI Splitter User Guide
- June 6, 2024
- Aten
Table of Contents
ATEN VS182A 2/4-Port HDMI Splitter
© Copyright 2020 ATEN® International Co., Ltd.
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All
rights reserved. All other trademarks are the property of their respective
owners.
This product is RoHS compliant.
Package Contents
- 1 VS182A / VS184A 2/4-Port HDMI Splitter
- 1 Power Adapter
- 1 HDMI Cable
- 1 User Instructions
Hardware Review
Front View
1. Port Output LEDs
2. Input LED
3. Power LED
Rear View
1. Power Jack
2. HDMI Input Port
3. HDMI Output Ports
Hardware Installation
- Use a Male-to-Male Type A HDMI cable to connect your computer or HDMI source device to the VS182A/VS184A HDMI Input port.
- Use up to four Male-to-Male Type A HDMI cables to connect up to four HDMI display devices to the VS182A/VS184A Output ports.
- Plug the power adapter that came with the VS182A/VS184A package into an AC power source, the plug the power adapter cable into the splitter’s Power Jack.
Note:
The VS182A/VS184A will detect the resolution of the monitor connected to port
1 of the installation. If you would like to change the resolution, simply
adjust the settings from the HDMI source device configuration menu.
Support and Documentation Notice
All information, documentation, fi rmware, software utilities, and specifi
cations contained in this package are subject to change without prior notifi
cation by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and
software can be found online at http://www.aten.com/download/
Technical Support: www.aten.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>