1Mii B0301 2 in 1 Wireless Transmitter and Receiver User Manual
- June 6, 2024
- 1Mii
Table of Contents
1Mii B0301 2 in 1 Wireless Transmitter and Receiver
ln the box
Product Overview
Switch to Trcnsmitter+Bypass mode/ Power off/ Receiver Mode
Select Codec: Format (ll/FS/HD) by the Switch
- Search and Pair
- Confirm OK
- Select Device
- Volume Up/Down
- Reset/Clear History
TX mode
TX MODE
Slide the mode switch to IX Bypass· side Enter your headphone /speaker into
PAIRING mode
Please refer to your headphone/speaker user manual for details.
Search and Conned your device to the Transmitter
- Press ® to search for your device on the transmitter. The bottom of the screen should now display “searching”.
- Use @ /0 to select your device. and then press,i) to connect The bottom of the screen should now display ·connecting·
- Once connected. will appear next to your device on the LCD screen
Add another headphone to Iha transmitter
The transmitter can work with two headphones simultaneously; simply repeat the
instructions above to pair &. connect the 2nd headphone.
For next use
- Turn on your headphones. give it 3-5 seconds. they should automatically reconnect
- If ttiey dont, Press @ once to manually reconnect.
- Enjoy your music
RX mode
RX MODE
- Connect your speaker to “to speaker” port of B03+ with the audio cable provided (3.5mm / RCA / Optical Coble) .
- Slide the mode switch ta “RX” side.
- Pairing: Pair BOS+ with your Bluetooth-enabled phone/PC/tablet
- Pairing mode of BOO+ (get “Pairing· on the screen)
- First time use: B03+ auto enter pairing mode (with clear memo,y)
- Afterward: short press ® button to enter pairing mode.
- Turn on Blueto.:,th of your Phone or other device and select 803+ in the Bluetooth list
- Walt far the connected (For quick pairing, better keep both devices within I meter when pairing)
- Enjoy your music.
OPERATION
If your TV hos Digital Optical Out
Please use the Optical coble to connect your TV to the OPT INPUT port on the
transmitter
Ensure 111□1 the MIC/ AUX/OPT audio input switch on transmitter has been
switched to “OPT positon
Now you can stream audio from your TV
If your TV hos an AUX/3.5mm Out .
Please use the AUX cable to connect your TV to the AUX INPUT port on the
transmitter.
Ensure that the MIC/AUX/OPT audio input switch on transmitter has been
switched to AUX position
Now you can stream audio from your TV.
If you still can1 hear anything through the headphones, please set the Sound
Out/Speaker setting on your TV to “Wired headptiones· or “Headset·.
The Bluetooth® word mark and logos ore owned by the Bluetooth SIG, Inc. and any use of such marks by 1Mii Ltd. is under license. other trademarks and trade names are those of their respective owners.
FCC
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference. and (2) This device must accept any interference. Changes or
modifications not expressly approved by 1Mii Ltd. will void the user’s
authority to operate the equipment. This equipment has been tested and found
to comply with the limits for a Class B digital device. pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, usesand can radiate radio frequency energy and. if not installed
and used in accordance with the instructions. may cause harmful interference
to radio communications.
However. there is no guarantee that interference will not occur in o
particular installation. It this equipment does cause harmful interference ta
radio or television reception. which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between equipment and receiver
- Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected
- Consult the manufacturer or an experienced ratio/TV Lechr’icion for help.
This product_ like other radio devices. emits radio frequency el0ctro-magn0tlc energy and operates within the guidelines found In radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
Warranty
Warranty service is limited ta normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions. os well as damages that did not occur during shipping, repairs and adjustments not opp raved by the company. damages from misuse. inattention or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fee.
support@1mii.com
web: www.1mii.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>