MOMAX RO1S Trio-Cleanse IoT UV-C Vacuum Robot
- June 6, 2024
- MOMAX
Table of Contents
MOMAX RO1S Trio-Cleanse IoT UV-C Vacuum Robot
Product Description
This user guide is to introduce the usage of HKBN Home App for this product with smart action examples only. For the following details, please refer to the instruction in the package:
- Product Overview;
- Introductions of LED screen;
- Instructions of Charging;
- Installation;
- Maintenance and Cleaning;
- Problem Shooting etc.
Download HKBN Home App
Search and download “HKBN Home” APP in Apple App Store OR Google Play Store
OR Scan the QR code below
Add Device
-
You must first connect your phone to a 2.4GHz Wi-Fi network when adding device.
-
Tap “Devices” on the bottom menu. (image 1)
-
Tap “Add Device” button OR “+” icon at top right corner if you already have paired device. (image 2)
-
Tap “Trio-Cleanse IoT UV-C Vacuum Robot” from left menu “MOMAX”. (image 3)
-
Connect power, hold the ON/OFF button until the Wi-Fi indicator blinks. (image 4)
-
Select 2.4GHz Wi-Fi network and enter password* and then tap “Next”. (image 5)
-
Please wait a moment while your device is in pairing process. (image 6)
Important tips: Wi-Fi requirement- Currently all smart devices are compatible to 2.4GHz network only. Please make sure that your device and mobile are connected with 2.4GHz but not 5GHz Wi-Fi network.
- If you have 5GHz network and by using the same network name (SSID) as the 2.4GHz network, please temporarily turn off the 5GHz network first before adding device.
-
After device added successfully, you can change the device name and assign it to the located room. (You can also change the device name and room location later in device setting page and room management page.) And you can find the Momax Trio-Cleanse IoT UC-C Vacuum Robot in the “Device” page.
Control Device
Main Control Panel
Switch On/Off
You can press the “Switch” key to turn on/off your device remotely. It will show a “power off” notice on screen after you switched off the device. (image
Mode Selection
You can switch to different modes in HKBN Home App according to different siutations:
- “Smart”: The robot will switch between all modes automatically.
- “Wall Follow”: The robot will follow walls to clean corners and edges
- “Spiral”: The vacuum robot will circle around to clean open floor space (1.5m x 1.5m). It is designated to clean heavily soiled area
- “Chargego”: The vacuum robot will return to the recharging dock
- “Random”: The vacuum robot will travel to new areas. (Recommended for carpet)
- “Manual mode”: Manual control the direction to clean a specific area (When turning left or right, the robot will drive the direction of rotation using a single wheel.)
- “UVC”: UV-C light shines on floor surface that helps to Inhibit 99.9% of the most common surface bacteria*
*Attestation report of Hong Kong Certification Centre (HKCC): 99.99% of Klebsiella pneumoniae, Escherichia coli, Staphylococcus aureus and Salmonella typhimurium were sterilized in 2 seconds with the use of the UV lamp of Trio-cleanse (R01S).
Manual Mode
Manual control the direction to clean a specific area. (When turning left or right, the robot will drive the direction of rotation using a single wheel.) (image 1 & 2)
“Schedule”: automated ON/OFF function
You can set automated schedule to turn ON/OFF your robot vacuum:
-
Tap “Schedule” (image 1);
-
Tap “Add” (image 2);
-
Select the time you need and then tap “Switch”(image 3);
-
Select “On” or “Off” (image 4);
-
Tap the button to enable or disable this schedule (image 5).
Function Settings
You can enable/disable different functions in “Setting” section:
Scene (Smart Action)
The integration of different smart devices is the beauty of smart home living
which provides convenience and many possibilities of creating your preferred
control settings. By setting SCENE, you can execute different smart devices at
the same time by only one single tap. You can tailor make your unique scene
such as movie time scene, welcome/back home scene, reading scene etc. User
Voice Command to Turn On/Off cleaning
Instructions below explain how to create a Scene:
How to add Siri Command into Scene:
Device Information
Check for Firmware Upgrade
Tap “Check for Firmware Upgrade”, you can see current firmware version and available upgrade version if any. Tap “Upgrade” to start firmware upgrade.
Remove Device
- In device settings page, tap “Remove Device”. (image 1)
- Tap “OK” to confirm and remove device from your account. (image 2)
Product Specifications
- Model No.: RO1S
- Rated Voltage: 14.4V
- Power: 30W (Vacuum Robot)
- Rated Power / Output: 11.4W (Charging Base)
- Water Tank Volume: 100ml
- Suction Force: 800Pa / 1300Pa / 1800Pa
- Noise Level: 40-68dB
- Working Time: 110 mins
- Climbing Angle: 15°
- Obstacle Crossing: 20mm
- Effective Area: 120m²
- UV-C Radiation: 3500-4000Um/cm²
- Battery Type: 2600mAh Li-Ion Battery
- Wireless Wi-fi Frequency: 2.402GHz – 2.480GHz
- Wireless Wi-fi Distance: 10m
- Size: 350 X 350 X 80mm (Vacuum Robot) : 160 X 143 X 80mm (Charging Base)
- Weight: 3.1Kg (Vacuum Robot)
- Cable Length: 1.8m
Product Maintenance and Warranty
For the enquiry of product maintenance and warranty, please contact the
product distributor/ manufacturer below:
MOMAX Customer Service Centre
Service Center: Unit A, 4/F, Cheung Lung Industrial Building, 10 Cheung Yee
Street, Lai Chi Kok, Kowloon, Hong Kong
Tel.: (852) 2402 3186
E-mail: info@momax.net
Opening Hours: (Monday – Friday) 9:00a.m. to 6:00p.m., Closed on Saturday,
Sunday and Public Holidays.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>