MOMAX QL6S Bright IoT Lamp with Wireless Charger User Guide

MOMAX QL6S Bright IoT Lamp with Wireless Charger

Download HKBN Smart App

Search and download the “HKBN Smart” APP in Apple App Store OR Google Play Store Scan the QR code below

Add Device

1. You must first connect your phone to a 2.4GHz Wi-Fi network when adding device;
2. Tap “Devices” on the bottom menu (image 1);
3. Tap “Add Device” button OR “+” icon at top right corner if you already have paired device (image 2);
4.  Tap “Bright IoT Lamp” from left menu “MOMAX” (image 3);
5.  Power on the device (keeps the light OFF), then hold the Wi-Fi button until the Wi-Fi indicator blinks (image 4);
6.  Select Wi-Fi network and enter password*, and then tap “Next” (image 5);
7. Please wait a moment while our device is in the pairing process (image 6).

 Important tips: Wi-Fi requirement **

**

• Currently, all smart devices are compatible to the 2.4GHz network only. Please make sure that your device and mobile are connected with 2.4GHz but not 5GHz Wi-Fi network.
• If you have a 2.4GHz and 5GH Wi-Fi channels and they are using same SSID, we suggest to edit it to a different name before pairing. If you insist to use the same SSID on two channels, please turn off the 5GHz channel first before pairing.

8. After the device is added successfully, you can change the device name and assign it to the located room. (You can also change the device name and room location later in device setting page and room management page.) And you can find the added device in the “Device” page.

Control Device

• Introduction of Control Panel
• Switch On/Off

You can press the desk lamp icon to turn on/off your desk lamp remotely.

• Adjust Color Temperature and Brightness

You can adjust the color temperature and brightness by dragging the scroll bar.

• Scene Mode

You can set different light scenes by your favorite color temperature, flash mode and flash speed of the light.

• Timer (Countdown)

You can set coundown timer to turn on and off your desk lamp by selecting “Timer” in the menu.

Scene (Smart Action)

The integration of different smart devices is the beauty of smart home living which provides convenience and many possibilities of creating your preferred control settings. By setting SCENE, you can execute different smart devices at the same time by only one single tap. You can tailor-make your unique scene such as movie time scene, welcome/back home scene, reading scene etc.

User Voice Command to Turn On/Off Desk Lamp

1. In “Smart Action” under the page of “Scene”, tap “+” to add new scene, and then tap “Add Action”
2. S. elect Bright IoT Lamp and tap “Switch”, and then select “On”.(If turn off the lamp then select “Off”)
3.  Tap to enable “Show on Dashboard Widgets”, tap “Save” on the top right corner to complete

How to add Siri Command into Scene:

1. 1. In the page of “Scene”, tap “Add to Siri”
2.  In “Siri Shortcuts”, select the scene you would like to add Voice command
3.  Input the voice command you  want and then tap “Add to Siri” to complete

Automation (Smart Action)

AUTOMATION can carry out device actions automatically by pre-conditions like environment factors or smart device status. You can handover this complex and important daily works to HKBN Smart for convenient and simple living. Automation included the setting of Temperature, Humidity, Weather and Schedule as condition to trigger different control in smart devices. Below is the automation example of Momax Bright IoT Lamp:

Turn on desk lamp at 6:00 am

Instructions below explain how to create an Automation:

1. In “Smart Action” under the page of “Automation”, tap “+” to add new Automation, and then tap “Add Condition”
2. Tap “Schedule”
3. Set the time at 6:00am
4.  Tap “Add Action”
5.  Select the related device and then tap “On” in power.
6.  Save to complete.
7.  In the page of automation, you can enable or disable automation

Device Information

• Page Layout
• Check for Firmware Upgrade

Tap “Check for Firmware Upgrade”, you can see current firmware version and available upgrade version if any. Tap “Upgrade” to start the

firmware upgrade.

• Remove Device

1. In device settings page, tap “Remove Device”;
2.  Tap “OK” to confirm and remove device from your account.

Product Specifications

• Model
•  Input (AC)
•  Input (DC)
•  Output 1 (Wireless)
•  Output 2 (USB)
• Color Temperature
• Product Size
•  Product Weight
•  QL6S
•  100-240V 50/60 Hz, 0.5A : 12V/ 2A
•  5V 1A, 9V 1.1A (10W max.) : 5V 2A
• 2700-5300K
• 450mm x 150mm x 450mm : 850g

Product Maintenance and Warranty

For the enquiry of product maintenance and warranty, please contact the product distributor/ manufacturer below:

MOMAX Customer Service Centre

• Service Center: Unit A, 4/F, Cheung Lung Industrial Building, 10 Cheung Yee Street, Lai Chi Kok, Kowloon, Hong Kong
•  Tel.: (852) 2402 3186
•  E-mail: info@momax.net
•  Opening Hours: (Monday – Friday) 9:00 a.m. to 6:00 p.m., Closed on Saturday, Sunday and Public Holidays.

Should you have any query, please call our Customer Service Hotline at 128 100.

References

• 📧info@momax.net

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>