ZOSI C306 Smart Battery IP Camera User Guide

ZOSI C306 Smart Battery IP Camera User Guide

www.zositech.com

01 / What’s in the Box

02 / Gallery & Specs

1. Antenna
2. HD Lens
3. Infrared LEDs
4. Microphone
5. Status LED
6. PIR Sensor
7. White LED Spotlight
8. Adjusting Screw
9. Disconnect Button
10. Power Switch
11. Loudspeaker
12. Charge Indicator
13. Micro SD Card Slot
14. Retaining Screw
15. Reset Hole
16. Power Port

03 / Install Cloud Edge App

3.1 Search “CloudEdge” in App Store or Android Market, or scan the QR

code below to download and install on your smartphone .

https://itunes.apple.com/app/id1294635090?mt=8https://play.google.com/store/apps/details?id=com.cloudedge.smarteye&hl=en_IN&gl=US

Note: Please allow the following 2 authorizations when running the App for the first time.

(1) Allow “Cloud Edge” to use data and wireless network ( it would fail to add device if not allowed).
(2) Allow “CloudEdege” to push notifications (Smartphone can receive alert push when camera triggers motion detection or light and siren alarm).

3.2 Register an Account

New users need to sign up by email/phone number, tap the “Sign Up”. Follow the instructions to sign up and log in.

04/ Add the Device

4.1 Insert a Micro SD Card

Please insert a Micro SD card to record and replay the motion detection video. (Micro SD card (Max 128G) is not included)

Note: Please insert the Micro SD card before power on, otherwise the Micro SD card cannot be read.

42 Turn On the Camera

Take out the battery, remove the insulation sticker and slot the battery back into the camera. You will hear a tone indicating that the camera is activated, the indicator LED will stays solid red.

• 4.2.1 Take out the battery, remove the insulation sticker, and then slot the battery back into the camera and lock it with screws.
• 4.2.2 Press the power button for 3–5 seconds to turn on the camera, the indicator LED will stays solid red (if the device cannot be activated, please charge with the DC5V-1A /2A charger for 15 minutes)

Note: DC1N2A power adapter is not included.

4.3 Connect to WiFi

• 4.3.1 Keep the camera, phone and router within range of 1-30 inches (30-100cm) and connect to the wireless network.

Note: The camera currently only supports 2.4G wireless networks, and currently does not support SG wireless networks,

• 4.3.2 Run CloudEdge App, Click and select “BATTERY CAMERA”.
• 4.3.3 Select “The device has flashed red slowly or you hear a tone”, tap NEX1
• 4.3.4 Select 2.4Ghz WiFi SSID and input password, tap NEXT.
• 4.3.5 Point the QR code towards the camera lens in about 15cm.
  The device lens is aimed at the QR code on the phone screen with a distance of 15 cm. You will hear a tone if successfully scanned and tap NEX1

• 4.3.6 After tapping “Hear tone”, camera will start connecting WiFi and skip to “Search Device” page after setup finished, you can edit camera name here, then click “DONE” to open camera in My Device list, now you can watch live streaming.

05 / Device Menu

06/ PIR Alarm Settings

6.1 Passive Infrared Detector (PIR) is turned on by default, and the

detection distance is about 6 meters (20 feet)

Setting as follows:

1. Settings ….. Motion Detection
2. Motion Detection (tum on–+ to monitor and alarm the movement of people in front of the camera)
3. Alarm interval (tum off/ 2 minutes/5 minutes/10 minutes)
4. Alarm only when people appear (Select daytime human-figure detection or Nighttime human-figure detection)
5. Alarm Plan (open–+ set the alarm time, the device only triggers an alarm event within the set time period)
6. Audio warning and strobe light (open —> select Audio warning/White light warning /Audio warning and strobe light–+ adjust alarm volume)

62 Alarm Push Notification and Playback

Battery camera with PIR sensor is not designed for 24/7 all day recording, but just push alarm message notification to App and record video to Micro SD card when PIR sensor detected human motion events, then you can playback the motion clips wherever you are via CloudEdge App.

When Pl R is triggered, camera system’s reaction:

1. Alarm Sound in app (please enable Cloud Edge App notification in phone setting and also turn on phone volume).
2. Alarm Message Notification (please enable CloudEdge App notification in phone setting).
3. Alarm snapshot and video record in SD card (please insert Micro SD Card).

07 /Camera Installation

7.1 You can place it on any flat surface: table, chair, floor etc ..

7.2 Install with with Wall Mount

7.2.1 Drill 5 holes according to the position of the mounting base, and mount the base on the wall with the included pack of screws.

1. Install retainer plate

7.2.2 Lock the two slots on the camera base to the hook on mounting base.

2. install the camera

7.2.3 Insert and tighten the safety set screw.

3. Fixed camera

7.2.4 Insert and tighten the screws on the bottom of the camera battery pack.

4. Fixed battery

7.2.5 Use the included screwdriver to adjust the camera to a proper angle and tighten the adjustment screw.

5. Fixed camera angle

08/ Important Notes for Reducing False Alarms

8.1 To reduce false alarms. please note:

Do not install the camera towards any objects with bright lights including sunshine, bright lamp lights, etc.

Do not place the camera too close to a place where there are frequently moving vehicles. Based on a series of tests, the recommended distance between the camera and vehicle is 15 meters (55ft).

Stay away from the outlets, including air conditioner vents, humidifier outlets, the heat transfer vents of the projectors, etc.

Keep the camera at least 1 meter away from any wireless devices, including Wi- Fi routers and phones, in order to avoid wireless interference.

8.2 Cover the Monitoring Area

It’s not suggested to make the PIR sensor vertically face the moving object when installing the camera, otherwise it may not detect the motion events. It is suggested to adjust the angle between PIR sensor and detected object larger than 10°.

Appendix: LED Status Description and troubleshooting sheet

www.zositech.com
service@zositech.com

All rights reserved.

No part of this publication may be reproduced by any means without written permission from ZOSI.

The information in this publication is believed to be accurate in all respects.
ZOSI will not assume responsibility for any consequences resulting from the use thereof.

The information contained herein is subject to change without notice. Revisions or new editions to this publication may be issued to incorporate such changes.
F920000Z3003500

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>