ADLER AD 7323 Fan 40 cm Stand User Manual
- June 6, 2024
- ADLER
Table of Contents
40cm Stand Fan AD7323
USER MANUAL
SAFETY CONDITIONS
Important instructions on safety of use
Please Read carefully and keep for future reference
-
Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
-
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
-
The applicable voltage is 220-240 V ~ 50/60 Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
-
Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
-
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
-
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
-
Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
-
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
-
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
-
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
-
Never use the product close to combustibles.
-
Do not let cord hang over edge of counter or touch hot surfaces.
-
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
-
In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
-
Protect the motor part of the unit from immersion in water.
-
Use only the original mounting hardware provided.
-
Switch on the device only after complete installation. The partially assembled and commissioned device does not ensure safe use and proper operation.
CAUTION: DO NOT TURN ON THE FAN WITHOUT FRONT AND REAR COVERS. -
Set up the fan away from curtains, curtains, or other objects that may be pulled in by the working fan.
-
Do not insert any objects into the cover of the fan. Otherwise it may lead to personal injury or damage to the device
DETAILED SAFETY INSTRUCTIONS
-
Use only original assembly parts, which were supplied with the fan set.
-
The device may be turned on only after it is fully assembled. A partially assembled and started-up device does not guarantee safe use and proper operation.
CAUTION: DO NOT TURN THE FAN ON WITHOUT ATTACHING THE FRONT AND REAR GUARDS. -
Place the fan away from curtains, sheer curtains and other items, which can be sucked in by the running fan.
-
Do not insert any objects into the fan grid. This could hurt your body or damage the device.
PRODUCT DEACRIOTION STAND FAN AD7323
- Front grid
- Propeller
- Rear grid
- Motor unit
- Speed control buttons
- Pipe (6A inside, 6B outside)
- Base cover
- Screw
- Round base
- Motor shaft
- Oscillation button
ASSEMBLING
- Draw the adjustable pipe (6A) out of the metal pipe (6B) then fasten the nut by clockwise.
- Assemble the pipe (6A+6B) to the base (9) with the screws.
- Slide the base cover (7)down onto the base (9).
- Assemble the motor unit (4) on the top of the adjustable pipe (6A) then lock it with the screw.
- Remove the nuts from the motor shaft (10).
- Assemble the rear grid (3) onto the motor unit (4). Rear grid (3) should fit into pins on the fan motor housing (4).
- Thread the grid nut onto motor housing (4) to lock the rear grid (3) in place.
- Place the propeller (2) onto motor shaft (10). Notice the pin on motor shaft should fit into slots of fan propeller.
- Thread the propeller’s cap onto threaded end of motor shaft (10).
- Use the screws and nuts to assembly the round logo plate with the front grid (1).
- Attach front grid (1) to rear grid (3). Then push all the safety clips into their places
- Assembly the safety screw and nut together to secure connection of both grids.
OPERATION
-
Please check the voltage information and make sure it matches the one in your country.
-
Place the device on flat, stable surface.
-
Use the speed control buttons (5) to operate the fan. Press proper switch to turn on the required speed. The fan has got 4 speed positions:
0 = off; 1 = low speed; 2 = medium speed; 3 = fast speed. -
Oscillation control: To make the fan oscillate in the left and right direction, press the oscillation button (11) down, it is located at the top of motor housing (4). To stop oscillation, pull up the oscillation button (11).
-
Tilt control: Adjust the fan head (1+2+3) to the desired angle by pushing the motor unit (4) a little up or down direction.
CLEANING AND MAINTENANCE
CAUTION: Do not allow the fan’s motor unit (4) or any buttons to get wet.
- Before cleaning remove the plug from the electrical socket.
- To clean dust from the fan propeller (2), remove the front grid (1). Remove the fan propeller (2) from the motor shaft (10), wipe with a damp cloth, then wipe dry.
- In order to clean the motor unit (4) gently wipe it with a damp cloth, without detergents. Wipe it dry.
- Store the fan in a dry place.
TECHNICAL INFORMATION:
Diameter 40cm / 16” Max
Power: 90W Power: 40W
Power supply 220-240V ~ 50Hz
Noise level 53,6 Db
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.