ADLER AD 3036 Waffle Maker 1500 W User Manual

June 6, 2024
ADLER

AD 3036
user manual

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

The warranty conditions are different if the device is used for commercial purposes.

  1. Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.

  2. The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.

  3. The applicable voltage is 220-240V ~50/60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.

  4. Please be cautious when using around children. Do not let the children play with the product. Do not let children or people who do not know the device to use it without
    supervision.

  5. WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.

  6. After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!

  7. Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions.

  8. Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid
    hazardous situations.

  9. Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.

  10. Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.

  11. Never use the product close to combustibles.

  12. Do not let the cord hang over the edge of a counter or touch hot surfaces.

  13. Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.

  14. In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of not more than 30 mA. Contact a professional electrician in this matter.

  15.  Accessible surface temperatures can be high when the appliance is operating. Never touch the hot surfaces of the appliance.

  16. Due to the high temperature, you should be careful when removing the prepared dishes, removing hot grease or other hot liquids. Be careful, there can be a hot steam presence during the use of the appliance.

  17. This electrical appliance contains a heating function. Surfaces, also different than functional surfaces, can develop high temperatures. The equipment shall be touched only at intended handles and gripping surfaces and use heat protection like gloves or similar. During or after use, please do not touch the baking tray or the hot area on the shell before the temperature goes down.

  18. The device must cool down before you store it.

  19. Do not place products made of cardboard, paper, plastic materials, or other flammable or meltable objects in the device.

  20. The device is not designed to work with external schedulers or separate remote control systems.

  21. Do not insert food portions that use whole oven volume, as it may cause fire and destruction of the device.

  22. The power cord may not be placed above the device and it may not touch or be located near hot surfaces. Do not place the device under a mains socket.

  23. Do not move or carry the device during operation. After the operation, it can be moved only if it had enough time for cooling down.

  24. Open the device by holding the handle. Before that, release the buckle (4).

  25. Before and during use, make sure that the power cord is not stretched over an open flame or other heat source or sharp edges that may damage the insulation of the cable.

  26. Before first use, remove all packaging components. Attention! In the case of a casing with metal parts, on these elements, a slightly visible protective foil can be stretched, which should also be removed.

  27. NEVER cover the device during operation or when it does not cool down completely, remember that the heating elements of the device take time to cool down completely.

  28. SAVE CAREFULLY if you use the device on surfaces sensitive to high temperatures. It is recommended then to use insulating washers

  29. The device can not be used with external time switches or other separate remote control systems

DESCRIPTION OF THE DEVICE

1. Lid 2. Power indicator (red)
3. Ready indicator (green) 4. Locking clip

BEFORE FIRST USE

  1.  Remove the packaging and all stickers and accessories that are outside and inside the device – between the heating plates.
  2. Wipe the baking plates with the damp, then with the dry cloth.
  3. Lightly oil the baking plates with the vegetable oil or other fat, connect the device to the power supply – the operating and readiness indicator lights up (2) (3).
  4. Leave the device turned on for a few minutes to get rid of the factory odor. In the meantime, the device may emit some smoke. That is normal.
  5. Clean the device according to the point “Cleaning” in these operating instructions.

USE OF THE DEVICE

Prepare the necessary products.

  1. Connect the closed device to the socket with grounding – The operation and readiness indicator lights up (2) (3).

  2. Wait approx. 10 minutes until the device heats up to the appropriate temperature. The ready display goes out (3).

  3.  Close the device. Lock the locking clip (4). Do not close the cover (1) forcibly.

  4. Open the device completely. Place the previously prepared product on the lower baking sheet

  5. During the operation of the device, the thermostat control lamp (3) will light up and extinguish – the thermostat maintains the corresponding temperature of the heating plates.

  6. The processing time for the products is on average 5 to 15 minutes and depends on the ingredients used and taste preferences.
    ATTENTION! While the products are being processed, the hot steam can escape from under the lid of the device.

  7.  Open the top lid (1) completely and only remove the finished products with the wooden or plastic kitchen scoop.
    ATTENTION! Do not use metal cutlery or sharp cooking utensils, as they can damage the special, non-stick layer on the heating plates.

  8. Before preparing the next portion of the products, close the device so that the heating plates heat up to the appropriate temperature.

  9. Disconnect the plug from the socket after baking is finished and put the appliance off to cool down.

CLEANING THE DEVICE

  1. Disconnect the plug from the socket and wait until the device has cooled down before you start cleaning the device.
  2. Clean with the damp, then the dry cloth (possibly with the paper towel).
  3. Lubricate the residue that is difficult to remove with a little cooking oil and remove after a few minutes with the wooden shovel.
  4. The heating plates must not be cleaned with sharp, rubbing cloths or sponges, and cleaning powders must not be used because they can damage the smooth, non-sticking layer of the plates.
  5. Do not immerse the device in water.

TECHNICAL SPECIFICATIONS
Power Supply : 220-240V ~ 50 / 60Hz
Power nom: 1080-1300W
Power max: 1500W

To protect your environment: please separate carton boxes and plastic PE bags and dispose of them in corresponding waste bins. The used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. The electrical appliance must be returned in order to reduce its reuse and utilization. If the device contains batteries they should be delivered to dedicated points separately.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals