UADLER AD 1187 Retro Radio ser Manual

: June 6, 2024
: ADLER

Table of Contents

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE
Device description:
SETTING UP
GETTING STARTED
Alarm Set Up
Alarm wake up
SLEEP OPERATION
FM OPERATION
BLUETOOTH OPERATION
USB OPERATION
AUX-IN (12) OPERATION
HEADPHONE OPERATION
SPECIFICATIONS:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AD 1187

user manual

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

The warranty conditions are different, if the device is used for commercial purpose.

Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
The applicable voltage is 230V, ~50Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or
knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sunlight or rain, etc.. Never use the product in humid conditions.
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid
hazardous situations.
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
Never use the product close to combustibles.
Do not let the cord hang over the edge of a counter or touch hot surfaces.
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of not more than 30 mA. Contact a professional electrician in this matter.
Avoid getting the device wet.
The device may only be wiped with a dry cloth. Do not use water or cleaning fluids.
The device should be kept in a dry room.

Device description:

FRONT:

TONE +/-
USB Port
PLAY / PAUSE / ASM / PAIR
PREVIOUS / TUNE-
NEXT / TUNE+
CLK-SET / MEM
ALARM / MEM-UP
MODE / STANDBY
PHONES
VOLUME +/-

BACK:
11. Telescopic aerial
12. AUX-IN
13. DC 9V Input

SETTING UP

Connect the power adapter to the mains power and the power jack on the back of the radio (DC 9V). Fully extend the radio aerial in a vertical position to obtain the maximum signal strength. When the power is connected, the defaulted clock 00:00 will be displayed on the LCD Screen. Long press the MODE / STANDBY (8) button to activate the unit. (This process may take a few minutes depending on the different signal strengths and working environments.)
The clock defaults to 0:00
The alarm is defaulted to 0:00 and off

GETTING STARTED

Time Set-Up
Switch the radio on by pressing the MODE / STANDBY (8) button once.
Press and hold the CLK-SET / MEM (6) button to enter into the clock set.
To set clock display format, press PREVIOUS / TUNE-(4) or NEXT / TUNE+(5) to choose between 12/24 Hours. To set the clock, press PREVIOUS / TUNE-(4) or NEXT / TUNE+(5) to adjust the clock by 01 minute and 01 hours.
Each step needs to be confirmed by pressing the CLK-SET / MEM (6) button

Alarm Set Up

Switch the radio on by pressing the MODE / STANDBY (8) button once.
Press and hold the ALARM / MEM-UP (7) button to enter into the alarm set.
To set time, press PREVIOUS / TUNE-(4) or NEXT / TUNE+(5) to adjust the clock by 01 minute and 01 hours to confirm press the ALARM / MEM-UP (7) .
To set mode, press PREVIOUS / TUNE-(4) or NEXT / TUNE+(5) to select outputs from Buzzer, Tuner, USB.
Each step needs to be confirmed by pressing the ALARM / MEM-UP (7) button.
The clock symbol will be displayed on the LCD screen after it is successfully sent.

Alarm wake up

When it wakes up to TUNER, the radio will play FM program.
When it wakes up to BUZZER, Beep Tone (1) rings.
When the alarm rings, you can press any button to stop the ring.
If you want to terminate the alarm, press and hold the ALARM / MEM-UP (7) button, the clock symbol is gone.

SLEEP OPERATION

Under any working mode, long-press the ALARM / MEM-UP (7) button to enter SLEEP mode, SLEEP mode is defaulted off and “10” will be displayed on the LCD screen. Press the ALARM / MEM-UP (7) button repeatedly to set sleep timer among 10 min, 20 min, 30 min, 40 min, 50 min, 60 min, 70 min, 80 min, and 90 min, stop when you are on the timer you wish to set, the “sleep timer” will be stored automatically. SLEEP symbol will be displayed on the LCD screen after it is successfully sent.
NOTE: Store information in your device To turn off the device, use the MODE / STANDBY (8) function (holding the button). In this way, you will retain the time settings and time will be visible under MODE / STANDBY (8) mode. When using a device from MODE / STANDBY (8) (holding the button), the set information is retained. If you turn off the device in the standard way (power off), you need to re-set the values such as time.

FM OPERATION

Press the MODE / STANDBY (8) button repeatedly until the LCD screen shows FM.
To scan stations manually, short press PREVIOUS / TUNE-(4) or NEXT / TUNE+(5) to adjust stations by 0.05MHz until you get your favorite station. Long press PREVIOUS / TUNE-(4) or NEXT / TUNE+(5) to activate auto scan. If the station signal is available, the scan will stop automatically and the radio will play this station, repeat this operation if it is not on the program you would like to listen.
To auto scan stations, long-press PLAY / PAUSE / STOP / ASM / PAIR (3) button, it will activate a full station searching. The stations scanned will be stored automatically when the scanning is completed.
To store a station, you must first tune to the station you wish to set as a preset. Then press the PLAY/ PAUSE / STOP / ASM / PAIR (3) button to activate storing function, “Pxx” will be displayed on the LCD screen, and the number “xx” will flash. Press PREVIOUS / TUNE –(4) or NEXT / TUNE+(5) to scroll through the numbered preset locations (P01-30), press the PLAY/ PAUSE / STOP / ASM / PAIR (3) button to store the station, the frequency will be displayed on the LCD screen. 30 stations can be stored in total. To tune to a saved/preset FM station, press the ALARM / MEM-UP (7) button to scroll through the stations. Stop when you see the station you would like to listen. The radio will begin to play.
Rotate the VOLUME (10) knob to adjust the VOLUME (10).
Rotate TONE (1) knob to adjust the high (treble) and low (bass) frequency range.

BLUETOOTH OPERATION

Press the MODE / STANDBY (8) button repeatedly until the LCD screen shows BT, you will hear an activation sound from the unit.
Turn on the Bluetooth function of your audio devices, search for AD 1187 and PAIR (3).
Once your device is successfully PAIR (3)ed with the unit, you will hear a confirmation sound from the unit.
Play and stream music from your audio devices to the unit.
Press the PLAY/ PAUSE / STOP / ASM / PAIR (3) button to choose play or pause, you can also do it via your audio device.
Press the PREVIOUS / TUNE –(4) to play a previous song and NEXT / TUNE+(5) to play the next song or do it via your audio device in the normal way.
Rotate the VOLUME (10) knob to adjust the VOLUME (10).
Rotate TONE (1) knob to adjust high (treble) and low (bass) frequency range.

USB OPERATION

Press the MODE / STANDBY (8) button repeatedly until the LCD screen shows USB.
Insert your USB into the USB port (2) and the unit will read the USB automatically.
The unit will play music from your USB.
Press the PLAY/ PAUSE / STOP / ASM / PAIR (3) button to choose play or pause.
Press the PREVIOUS / TUNE-(4) to play a previous song and NEXT / TUNE+(5) to play the next song.
Press the CLK-SET / MEM (6)to choose play modes: normal, single repeat, all repeat.
Rotate the VOLUME (10) knob to adjust the VOLUME (10).
Rotate TONE (1) knob to adjust high (treble) and low (bass) frequency range.

AUX-IN (12) OPERATION

Press the MODE / STANDBY (8) button repeatedly until the LCD screen shows AUX.
Plug the AUX-IN (12) cable into the AUX-IN (12) jack at the back of the radio. It will play the music from your external audio devices.
Rotate VOLUME (10) knob to adjust VOLUME.
Rotate TONE (1) knob to adjust high (treble) and low (bass) frequency range.

HEADPHONE OPERATION

Connect the headphone lead into the PHONES (9) Jack in the front of the radio and listen to the radio privately.
Rotate VOLUME (10) knob to adjust VOLUME (10).

SPECIFICATIONS:

Radio Frequency range: FM: 87.5 – 108.0 MHz
Power Source: 230V ~ 50Hz
Bluetooth version: 5.0
Speaker power: 2x 5W
Hereby, Adler Sp. z o.o., Ordona 2a, 01-237 Warsaw, Poland declares that the radio equipment type radio AD1187 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://adler.com.pl/dane/CE/ad_1187.pdf

To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins. The used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose of this appliance in the common waste bin.