Kogan Bluetooth Headset with Microphone and Charging Base KAOHSETBT4A

Kogan Bluetooth Headset with Microphone and Charging Base KAOHSETBT4A

BLUETOOTH HEADSET WITH MICROPHONE AND CHARGING BASE

COMPONENTS

OVERVIEW

USING THE BUTTONS

Multi- Function Button

(MFB)

| Power On| While off, long-press for 1-3 seconds to power on.
Power Off| While on, long-press for 5 seconds to power on.

Bluetooth Pairing Mode

| (from power off) Long-press for 5-8 seconds to enter Bluetooth pairing mode.
(from power on) Double-press the MFB to enter Bluetooth pairing mode.
Play / Pause| Press once while playing audio.
Redial a call| Double-press MFB to re-dial the last outgoing call.

Reconnect

| When there is an existing Bluetooth connection, powering on will automatically enter into reconnecting state. Otherwise, press MFB to reconnect under pairing mode.
Voice Dialling| Long-press MFB for 1 second, then release.

Audio Switch

| (with audio playing) Long-press MFB for 1 second to switch the audio between phone and Bluetooth headset.
Answer a call| (with incoming call) Press once.
Hang up a call| (during a call) Press once.
Reject a call| (with incoming call) Long-press for 1 second.
Volume +| Volume Up| Press once.
Next Song| Press and hold for 1 second.
Volume –| Volume Down| Press once.
Previous Song| Press and hold for 1 second.

CONNECTING

Paring mode

• While the headset is off, long-press MFB for 5-8 seconds to enter Bluetooth pairing mode.
• If the headset is already on, double-press the MFB to enter Bluetooth pairing mode.
• The LED indicator will flash blue and red when searching for a connection.

Connection

• On your device (phone, computer, etc), ensure Bluetooth is turned on, and search for nearby devices. Select the headset (“KAOHSETBT4A”) from the list to connect.
• Once successfully connected, the LED indicator will change to a solid blue light.
• You can now operate the headset using the MFB, Volume+ and Volume- buttons.

Connection with two devices:

• Follow the previous steps to connect with the first device (phone, computer, etc), and then turn off that device’s Bluetooth function.
• Double press MFB to enter pairing mode again. The LED indicator will flash blue and red when searching for a connection.
• On your second device, ensure Bluetooth is turned on, and search for nearby devices. Select the headset (“KAOHSETBT4A”) from the list to connect.
• Once successfully connected, the LED indicator will change to a solid blue light.
• Turn on Bluetooth function of the first device, and from the Bluetooth list, click to reconnect to the headset. The headset will be connected with both devices now.

Note: Music only can be played from one device under two connections. When you want to play

OPERATING

LED Indicator

Flashes blue, once every 5 seconds

Playing Music
Talking
Delete paired record| Flashes red and blue once, simultaneously
Charging| Solid red
Fully charged| Solid blue
Low battery| Flashes red

Three-way calling function

When receiving an incoming call while already on a call:

• Pressing the MFB once will answer the new call and hang up the current call
• Double pressing the MFB will answer the new call and keep the current call
• Long-press the MFB for 1 second will reject the new call and keep the current call

When you are on a three-way call, press the MFB once to drop the initial call and keep the new caller. Double press the MFB to switch priority between the initial call and new caller to control which call will be dropped.

CHARGING

Battery Low

When the LED is flashing red, the battery is low and requires charging. Charging time is approximately 2 hours for full charge. When charging, the LED will display a solid red light. This will change to solid blue light when fully charged and ready to remove from base.

Use of Charging Base

Place the headset on the charging base and then connect the charging base to USB charger (adaptor, PC, etc) through the Micro USB port for charging. This allows the headset to be easily recharged without having to plug/unplug the USB cable between uses.

Charging directly via Micro USB cable

You can also charge the headset by directly connecting to any USB power supply via the Micro USB cable. This allows you to connect directly to an in-car charger, travel charger, computer USB port, etc.

Note: Remember to charge the headset at least once every 2 months when not in use.

TROUBLESHOOTING

Attempt to reconnect failed

When the headset is connected with your mobile phone successfully for the first time, it will search an reconnect the paired device automatically when power on. If failed, please pair and connect again.

How to remove automatic connection to a device

When powered on, press and hold the volume+ and the volume- buttons simultaneously for 5 seconds to clear the pairing record. The LED indicator lights will flash blue and red at the same time, meaning the pairing record has been cleared and the headset will not automatically connect back to the previously device. When there are various connection problems, try clearing the pairing records first.

Need password to pair

Some connection devices require a password for pairing. If not shown on the device’s screen, we recommend trying any of the following basic codes: “0000”, “8888”, “1111” or “1234”.

Device not charging the headset

Any car charger, power bank, PC USB port, or any adaptor with DC 5V and at least 500mA can provide charge for this item. Ensure your selected device has meets these requirements.

SPECIFICATIONS

Bluetooth Version: Bluetooth 5.0

Bluetooth Chipset: CSR 8615

Operation Range: 10 metres

Bluetooth Protocols: **** HSP HFP A2DP AVRCP

CODEC Code: **** SBC

Battery Capacity: 180maH/3.7V

Charging Time: 2 hours

Stand-by Time: 200 hours

Working Time: approximately 17 hours (at 50% volume)

Headset Net Weight: 51g (approx.)

Charge Base Net Weight: 242g (approx.)

Headset Dimension: 163.21 x 142.2 x 48.5mm

Charging Base Dimension: 79 x 73 x 31mm

Need more information?

We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>