novostella Ustellar Smart LED Ceiling Light User Guide
- June 6, 2024
- novostella
Table of Contents
Ustellar Smart LED Ceiling Light
Smart Led Ceiling Light User Guide
1-16 14-26 14-26 14-26 14-26
1
English
Smart LED Ceiling Light
Thank you for ordering from novostella. Set-up is easy and takes only a few
minutes by following the instrucons.
The smart light can work with both Amazon Alexa and Google Assistant. But the
light aer being installed will need to be paired with an app called ‘Smart
Life’ first, and then the Smart Life app will need to be bound with either
Amazon Alexa or Google Assistant to acvate the voice control funcon.
Therefore, this user guide consists of four parts. Part one and two are
fundamental set-up, while part three and four are alternaves. If you use
Amazon Alexa for voice control, please follow instrucons on part one, two and
three. If you use Google Assistant for voice control, please skip part three,
follow the instrucons on part one, two and four.
Part One – How to install the light ?
·····················································2 – 7 Part Two – How to
pair the light to Smart Life app? ····························8 – 11 Part
Three – How to control the light with Amazon Alexa? ··············· 12 – 14
Part Four – How to control the light with Google Assistant?··············15 –
16
Part One – How to install the light?
Warning
(1) Please check if the light and the parts are intact before installaon. (2)
Make sure to cut off power before installaon. (3) Please do not place this
light in corrosive condions. (4) If there is any damage to the cord, please
cut off the power and stop using
it immediately. (5) Please do not retrofit the light within the warranty
period. (6) To ensure the light works properly, please use the voltage
indicated on the
packing.
2
English
1. Specificaon
P/N Model Wattage Luminous Flux Input Voltage Frequency Color Temperature Dimming CRI Beam Angle Working Temperature
NTC01S-RGBCW-US ZL-CWB24-RGBCW-8UN
NTC01S-RGBCW-EU ZL-CWB24-RGBCW-8EN
CW:24W RGB:8W CW:2400 lm AC120-240V 50/60Hz 2700K-6500K 1%-100% >80 120°
-20~40
NTC01S-RGBCW-UK ZL-CWB24-RGBCW-8KN
2. Dimension
300 mm / 11.8 in
33 mm / 1.3 in
3
English
3. Components
Lamp chassis
Screw x 2
PC Lampshade
Plastic Screw Anchor x 2
4. Installaon
Step 1. Open the lampshade by turning it counterclockwise.
4
English
Step 2. There are two screw bits on lamp chassis. Choose two of the bits to
make a triangular fixaon, drill holes on the ceiling and insert plasc screw
anchors into the holes.
Step 3. Idenfy the null wire, live wire signs on the wiring port. Pass your
power cord through the hole of ceiling lamp chassis, connect your household
wires correspondingly to the signs.
L (Brown/Black) N (Blue/White) Mains power cord
5
English
Step 4. Put screws into the screw bits on lamp chassis, and fix the lamp
chassis onto the ceiling
Step 5. Put on the lampshade to lamp chassis by turning it clockwise.
6
English
5. General Troubleshoong
If the lamp is properly installed, but sll fails to work. Please try following
soluons first.
(1) Please cut off the power and check whether the power cord of lamp is
properly connected with mains supply.
(2) If the power cord is correctly connected, please ask a proffessional to
check the input voltage or circuit.
If the soluons menoned above do not work, please stop using the lamp
immediately and contact professionals or the seller for help.
6. Roune Maintenance
(1) To ensure beer lighng, please clean the lamp once a year. (2) Please make
sure the power is off before rounne maintenance. (3) To avoid any damage to
the lamp, please do not use chemical solvent during
rounne maintenance.
FCC ID:
This device complies with part 15 of the FCC rules. Operaon is subject to the
following two condions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interferencethat may cause undesired operaon. This equipment complies with FCC
radiaon exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance of 20 cm
between the radiator and your body. This transmier must not be co-located or
operang in conjuncon with any other antenna or transmier.
7
English
Part Two – How to pair the light to Smart Life app?
Before starng the paring, please make sure to turn on the Bluetooth and WiFi
on your phone, and connect to the Internet. The smart light only supports
2.4GHz WiFi network, not 5.0GHz.Please make sure your working network is
2.4GHz, and your phone is connected to it. lf your WiFi router supports both
2.4GHz and 5.0GHz, please separate the two frequency bands in the router
sengs,and select the 2.4GHz for connecon. Step A: Smart Life app installaon
Please choose either way below to download and install the app. (1) As per
your phone system, choose the QR code to scan.
(2) Search keyword `Smart Life’ in Apple Store of Google Play. Step B: Create
an account on Smart Life and login. Note: Please keep your account and
password in mind for Alexa or Google Assistant APP pairing later.
8
English Step C : Add the light to Smart Life App 1. Tap +’ buon on top right corner to add device, then taplighng ‘ to enter next page.
2. WiFi Connecon This smart light only supports 2.4GHz WiFi network, not
5.0GHz. Please make sure your working network is 2.4GHz, and your phone is
connected to the required WiFi network. (1) Power on the light with your own
switch.
9
English Novostella 10
English seng page.
11
English 12
English 13
English 14
English 15
English 16
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>