novostella NTS52 Lasting Rainbow 52.5ft 16M IP65 Smart Strip Lights User Guide

[](https://manuals.plus/wp-content/uploads/2022/05/novostella-

LOGO-2.png)novostella NTS52 Lasting Rainbow 52.5ft 16M IP65 Smart Strip Lights LED RGB Light Strip User Guide

THANK YOU for choosing Novostella. To optimize user experience, please use the product according to the following instructions.

Warning

1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
2. This light strip is designed to match the power adpater output, so the  strip length CAN NOT not be extended according to the power limitation.
3. Do not cover this product as the covering may cause the flexible light to overheat and melt or ignite.
4. Do not operate with the flexible light tightly coiled.
5. Do not route the cord or flexible lighting through walls, doors, windows or any like part of the building structure.
6. Do not use if there is any damage to the light or cord insulation. Inspect periodically.
7. Do not submerge flexible light in liquids, or use the product in the vicinity of standing water or other liquids.
8. Secure this flexible light using only the hangers or clips provided. Do not secure thisproduct or its cord with staples, nails, or like means that may damage the insulation or permanently attach to the building structure.
9. Do not subject flexible lighting to continuous flexing.

Specification

Waterproof Rating(suitable for

indoor and outdoor use)

| ****

IP65

Battery Type| CR2025 / CR2032 (for RF remote controller)

Package Includes

| light Strip x 1, RF Remote Controller x 1, Power Adapter x 1, LED Signal Receiver x 1, Mounting Brackets
Model Number| NTS102-RGB
---|---
Wattage (Max)| 42W
Total Length| 10Sft/32m
Color| RGB
LED Quantity| 1120 LEDs
LED Type| 5050
Input voltage(power adapter)| 100-240V AC
Frequency(power adapter)| S0/60Hz
Working Voltage| 24V
Working Temperature| -2s·c~4o•c
Waterproof Rating(suitable for

indoor and outdoor use)

| ****

IP65

Battery Type| CR2025 / CR2032 (for RF remote controller)

Package Includes

| Light Strip x 2, RF Remote Controller x 1, Power Adapter x 1, LED Signal Receiver x 1, Mounting Brackets

Components[](https://manuals.plus/wp-content/uploads/2022/05/novostella-

NTS52-Lasting-Rainbow-52.5ft-16M-IP65-Smart-Strip-Lights-1.png)

LED Signal Receiver[](https://manuals.plus/wp-content/uploads/2022/05

/novostella-NTS52-Lasting-Rainbow-52.5ft-16M-IP65-Smart-Strip-Lights-2.png) RF Remote ControllerThree Settings

There are three flexible settings for the remote controller(s) to control the light strip(s) as per your lighting project, One-to-One Setting, One-to-Many Setting and Many-to-Many Setting. You can choose either which light strip and how many light strips one controller controls, or which controller and how many controllers control the light strip(s).
One-to-One Setting

One remote controller can only control one light strip. Tum on the remote controller and power on the LED Signal Receiver of the light strip. During the first 5 seconds, immediately long press the bottom left button on the remote controller till the strip light blinks. Then the ‘One-to-One Setting’ is done. One-to-One Setting is the factory default.
One-to-Many Setting

If you want to control many light strips with one remote controller, you could choose the ‘One-to-Many’Setting. Tum on the remote controller and power on all LED Signal Receivers of the light strips. During the first 5 seconds, immediately long press the bottom left button on the remote controller till the strip lights blink. Then the ‘One-to-Many Setting’ is done.

Many-to-Many Setting

If you have many light strips and remote controllers, and hope that any of the controller can control all the light strips, you could choose the ‘Many-to- Many’ Setting. Tum on each remote controller and power on its LED Signal Receiver. During the first 5 seconds, immediately long press the bottom right button on the remote controller till the strip light blinks.

Installation

1. How to connect all parts?

2. Connect the light strip to controller cable , and then connect controller cable to power adapter .

3. Plug the adapter into the socket and turn on the light strip by pressing ‘ON’ button on the RF remote controller.

4. How to cut the LED strip If necessary?
   Before cutting the LED strip, please keep these in mind.

5. Once the strip is cut, the rest part being cut can not work. So it’s not recommended to cut the strip unless it is really necessary.

6. After the strip is cut, please use the sealing glue (attached) to seal the end of the strip. Otherwise, the light strip can not retain waterproof and may be damaged while usage.

7. Cut the strip along the marks.

Note

1. If the strip can’t light up after the installation, please check whether the joints are connected correctly.
2. Please make sure to turn off the power supply during routine maintenance.
3. To avoid any damage to the strip, please do not use chemical solvent during routine maintenance.

How to control the light strip?

1. Download the App Magic Lantern by scanning the QR code below. This App is compatible with Android 4.0 and iOS 8.1 or above.
2. Power on the light.
3. Activate the Bluetooth function on your phone and open the App to automatically connect to the light.
4. Enjoy the lighting by exploring the functions such as brightness, modes, music sync, timer etc via the App.

Contact Us

Have some issues? No worries! Please reach us via these channels. Our customer services team is more than happy to help.

1. support@novostello.net
2. @novostelLighting
3. fb.com.novostela.fansCr
4. Scan to Message Nowt
5. www.novostella.net

Manufacturer: Shenzhen Ustellar Technology Ltd.
Address: Rm.201, A Bldg., No. A Qianhai 1st Rd., Shen’gang Cooperation Zone, Qianhai, Shenzhen, CHINA 518000

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>