OFFNOVA 20Pack Sublimation Tumblers Blank User Guide
- June 17, 2024
- OFFNOVA
Table of Contents
OFFNOVA 20Pack Sublimation Tumblers Blank
Introduction
How to Make Sublimation Tumblers?
A Step-By-Step Guide
- Create your design and mirror it, then print out on your sublimation paper.
- Clean the sublimation tumbler. Make sure it must be free of dust, dirt, and even fingerprints.
- Using heat-resistant tape, securely tape the design around the tumbler. If you have a full sublimation design, make sure the sublimation paper is tightly wrapped around the tumbler.
- Put the tumbler into the machine for heat transfer.
Material of cup
| Tumbler heat press machine
---|---
Temperature| Time
Stainless Steel
|
180°C / 356°F
| – Partial image: 60-80s
– Full image: 60-80s for 1st , after
rotating it 180 degrees, 30-40s for 2nd heat press
Glass
|
180°C / 356°F
| – Partial image: 120-150s
– Full image: 90-150s for 1st , after rotating it 180 degrees, 40-130s for 2nd heat press
Material of cup
| Sublimation oven
---|---
Temperature| Time
Stainless Steel| 180°C / 356°F| 6min
Glass| 180°C / 356°F| 16min
Note: You must remove the lid and accessories that are not heat-resistant before you start the heating transfer.
Get the free sublimation tumbler templates at: www.offnova.com
Tools You May Need
Tools you may need to sublimate on tumblers:
Documents / Resources
|
OFFNOVA 20Pack Sublimation Tumblers
Blank
[pdf] User Guide
20Pack Sublimation Tumblers Blank, 20Pack, Sublimation Tumblers Blank,
Tumblers Blank
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>