ELSYS ELT-2 Internal Antenna EXT Module Instructions
- June 1, 2024
- ELSYS
Table of Contents
Technical manual
EXT Module, Rev C
Published: 22 December 2023
EXT-module is a module that fits inside the ELT-2 and is intended for connecting external power and actuators and be used as a class C device. It can also connect to sensors and be used as a class A device.
Top view
Bottom view
Features
- Connection for external power
- On/Off output
- 0 - 10 V output
- General purpose input
- Fits inside the ELT-2 box
- Powers the ELT-2
- Switching between functions are done with jumpers.
Input voltage: 5 - 24 V DC
On/Off output: Max 0.7 A
0 - 10 V output: Max 5 mA
Input can be scaled to allow up to 50 V
-
On/off or 0-10y output (for 0- 10V, ext. power needs to be at least 11V)
-
External power in, 5-24V
-
Input to ELT-2. 10 or 50V range.
Connect 500 ohm resistor between inputs for 4-20mA (10V range) -
Constant 3.3V output. Max 10mA @ 12V in, max 5mA @ 24V in
Address
Tvistevägen 48
90736 Umeå
Sweden
Webpage
www.elsys.se
www.elsys.se/shop
E-mail
[email protected]
Specifications in this document are subject to change without notice.
©Elektroniksystem i Umeå AB 2023