OPTUS 7001801 Jumbo LCD Wall Clock Instruction Manual

: June 6, 2024
: OPTUS

Table of Contents

OPTUS 7001801 Jumbo LCD Wall Clock
Imprint
Validity note
About this Instruction Manual
General safety instructions
Parts overview and scope of delivery
Automatic time setting
Manual time setting and other user-defined settings
Alarm setting
Disposal
UKCA Declaration of Conformity
EC declaration of conformity
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OPTUS 7001801 Jumbo LCD Wall Clock

Imprint

Bresser GmbH Gutenbergstr. 2 46414 Rhede Germany www.bresser.de For any warranty claims or service inquiries, please refer to the information on “Warranty” and “Ser-vice” in this documentation. We ask for your understanding that unsolicited returns cannot be processed. Errors and technical changes excepted. © 2022 Bresser GmbH All rights reserved. The reproduction of this documentation – even in extracts – in any form (e.g. photocopy, print, etc.) as well as the use and distribution by means of electronic systems (e.g. image file, website, etc.) without the prior written permission of the manufacturer is prohibited. The designations and brand names of the respective companies used in this documentation are generally protected by trade, trademark, and/or patent law in Germany, the European Union, and/or other countries.

Validity note

This documentation is valid for the products with the following article numbers: 7001801 7001802 7001803 Manual version: 0222 Manual designation: Manual_7001801-7001802-7001803_Jumbo-LCD-Wall-Clock_en de_OPTUS_v022022a Always provide information when requesting service.

About this Instruction Manual

NOTICE

These operating instructions are to be considered a component of the device. Read the safety instructions and the operating manual carefully before using this device. Keep this instruction manual in a safe place for future reference. When the device is sold or given to someone else, the instruction manual must be provided to the new owner/user of the product.

General safety instructions

DANGER

Risk of an electric shock!
This device contains electronic parts that are powered by a power source (AC adapter and/or batteries). Improper use of this product may result in electric shock. Electric shock can cause serious or fatal injuries. It is therefore imperative that you observe the following safety information.

Never leave children unattended when handling the device! Follow the instructions carefully and do not attempt to power this device with anything other than power sources recommended in this instruction manual, otherwise there is a danger of an electric shock!
Disconnect the power supply by pulling the mains plug when the appliance is not in use, in case of a longer interruption of operation and before any maintenance and cleaning work.
Place your device so that it can be disconnected from the power supply at any time. The power outlet should always be near your appliance and should be easily accessible, as the plug of the power cord serves as a disconnect device from the mains supply.
To disconnect the unit from the mains, always pull the mains plug and never pull the cable!
Check this device, cables and connections for damage before use.
Never attempt to operate a damaged device, or a device with damaged electrical parts! Damaged parts must be replaced immediately by an authorized service agent.
Operate the device only in a completely dry environment and do not touch the device with wet or damp body parts.

The danger of suffocation!
Improper use of this product may result in suffocation, especially for children. It is therefore imperative that you observe the following safety information.

Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a danger of choking!
This product contains small parts that can be swallowed by children! Choking hazard!

Explosion hazard!
Improper use of this product may result in fire. It is essential that you observe the following safety information in order to avoid fires.

Do not expose the device to high temperatures. Use only the supplied AC adapter or the recommended batteries. Do not short-circuit the device or batteries or dispose of in fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!

The danger of material damage!
Improper handling may result in damage to the unit and/or accessories. Therefore, use the device only in accordance with the following safety information.

Do not disassemble the device! In the event of a defect, please contact your dealer. They will con-tact the Service Center and can arrange the return of this device for repair if necessary.
Do not expose the device to high temperatures and protect it from water and high humidity.
Do not immerse the unit in water!
Do not subject the device to excessive vibrations.
Only use accessories and spare parts for this device that comply with the technical specifications.
Use only the recommended batteries. Always replace weak or empty batteries with a new, com-plete set of batteries at full capacity. Do not use batteries from different brands or types or with dif-ferent capacities. Remove batteries from the device if it is not to be used for a longer period of time!

The danger of voltage damage!
The manufacturer accepts no liability for voltage damage as a result of incorrectly inserted batteries, or the use of an unsuitable mains adapter!

Parts overview and scope of delivery

1	AM/PM information in 12-hour time mode	2	Current time (hours : Minutes)
3	Symbol for active daylight saving time	4	Time signal transmission symbol
5	Alarm time active (1 or 2)	6	Alarm time active (3 or 4)
7	Display mode dependent alternate display (seconds of current time or alarm
time mode 1-4)	8	Temperature probes
9	Indoor temperature (in °C or °F)	10	Weekday
11	Date	12	Display
13	Case	14	Cooling openings
15	Device for wall mounting	16	TIME SET button (Setting the time)
17	SNOOZE button (snooze function)	18	DOWN key (also AL 3-4 and time

Scope of delivery:
Wall clock
Also required (not included): 3 pcs. AA batteries, 1.5V

Automatic time setting

After the power is restored, the unit automatically searches for the radio signal. It takes about 3-8 minutes to complete this process. If the radio signal is received correctly, the date and time are set automatically and the reception sym-bol is displayed. If no radio signal is received, proceed as follows:

Press the DOWN button for approx. 2 seconds to initiate the reception of the radio signal again.
If no radio signal is still received, the time setting must be made manually.

Manual time setting and other user-defined settings

In normal display mode, press the TIME SET button for about 3 seconds to enter the settings mode.
Digits to be set are flashing.
Press UP or DOWN button to change the value.
Press the TIME SET button to confirm the entry and move to the next setting.
Sequence of settings: 12/24 hour mode > Time zone (-12 to +12 hours) > Hours > Minutes > Seconds > Year > Month > Day > Temperature unit > Language
Finally press the TIME SET button to save the settings and exit the settings mode.
NOTICE! If the unit is set manually, the automatic time setting is deactivated by radio signal (reception symbol disappears). To initiate the reception of the radio signal again, press the DOWN key for approx. 3 seconds until the reception symbol reappears in the display and flashes.

Alarm setting

Press the ALARM button to display the desired alarm type 1, 2, 3 or 4. The corresponding wake-up call icon flashes.
Press the ALARM button for approx. 2 seconds for the desired alarm type to enter the alarm time setting mode.
Digits to be set are flashing.
Press UP or DOWN button to change the value.
Press the CLOCK-SET button to confirm the entry and move to the next setting.
The sequence of settings: Hours > minutes
Finally, press the CLOCK-SET button to save the settings and exit the setting mode. The icon for the set wake-up call is shown on the display. The wake-up call is activated.
Press the ALARM button again, or repeatedly if necessary, to deactivate the wake-up call. The wake-up call icon is no longer displayed. The alarm call is deactivated.
Press UP (+) button 1x to activate alarm 1, 2x to activate both alarms AL1-2, 3x to activate alarm 2 and 4x to deactivate the alarm.
Press DOWN (-) button 1x to activate alarm 3, 2x to activate both alarms AL3-4, 3x to activate alarm 4 and 4x to deactivate the alarm.

Disposal

Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste disposal service or environmental authority for information on the proper disposal. Do not dispose of electronic devices in the household garbage!
According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its transposition into national law, used electrical equipment must be collected separately and recycled in an environmentally sound manner. Batteries and rechargeable batteries must not be disposed of with household waste. You are legally obliged to return used batteries and accumulators and can return the batteries after use either in our sales outlet or in the immediate vicinity (e.g. in the trade or in municipal collection points) free of charge. Batteries and accumulators are marked with a crossed- out dustbin and the chemical symbol of the pollutant, “Cd” stands for cadmium, “Hg” stands for mercury and “Pb” stands for lead.

UKCA Declaration of Conformity

Bresser GmbH has issued a “Declaration of Conformity” in accordance with applicable guidelines and corresponding standards. The full text of the UKCA declaration of conformity is available at the following internet address: www.bresser.de/down- load/7001801_7001802_7001803/UKCA/7001801_7001802_7001803_UKCA.pdf

Bresser UK Ltd. • Suite 3G, Eden House, Enterprise Way, Edenbridge, Kent TN8 6HF, Great Britain

EC declaration of conformity

Hereby Bresser GmbH declares that the radio equipment type with 7001801 7001802 7001803 complies with Directive 2014/53/EU. The full text of the EC declaration of conformity is available at the following Internet address www.bresser.de/down- load/7001801_7001802_7001803/CE/7001801_7001802_7001803_CE.pdf

Warranty

The regular guarantee period is 2 years and begins on the day of purchase. To benefit from an extended voluntary guarantee period as stated on the gift box, registration on our website is required. You can consult the full guarantee terms as well as information on extending the guarantee period and details of our services at www.bresser.de/warranty_terms.