novostella NTA15B Switch Controlled Security Light User Guide
- June 5, 2024
- novostella
Table of Contents
novostella NTA15B Switch Controlled Security Light
Switch Controlled Security Light User
Guide
- Thank you for ordering from Novostella. Set-up is easy and takes only a few minutes by following the instructions.
- This LED security light is switch controlled, just install it and control it ON/OFF by a wall switch.
- White light adjustable design, can be selected through the wall switch: 6000K/4S00K/3000K three different color temperature.
- AC Power Hardwired, NOT Solar Powered, NOT Battery Powered.
- No motion sensor, No dusk to dawn sensor.
- NOT Dimmable. Brightness NOT adjustable.
Instructions
Warning
- Please check if the light and the parts are intact before installation.
- Make sure to cut off power before installation.
- Please do not place this light in corrosive conditions.
- If there is any damage to the cord, please cut off the power and stop using it immediately.
- Please do not retrofit the light within the warranty period.
- To ensure the light works properly, please use the voltage indicated on the packing.
Parameters
Components
- Screw head
- Screws
- Wire Connectors
- Mounting Bolt
- Mounting Strap
- Gasket
Dimension
Installation
Safety Information:
• This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and operation of
the product and the hazards involved.
• Tum power OFF before installing.
Installations:
- For best performance.mount the light about 6.5-Bfl above the ground
- Turn off the power.
- Install the mounting strap as shown with two screws that fit your juntion box.
- Tighten the wires with wire connectors. L should be connected to Black wire, should be connected to White wire
- After mounting the light, apply silicone sealant completely around the perimeter of the cover plate where the back of the cover plate meets the mounting surface. Silicone sealant prevents water from seeping into the junction box.
- Quickly switch the wall switch to change between 3 color temperab.lre of white light: 6000K(Cool White), 4500K(Neutral White), 3000K(WaRl1 White).
Note:
- After powering off for over 7 seconds, the light will remember the last selected color temperature.
- Wall switch control, NOT Dimmable. Brightness NOT adjustable
Contact Us
Have some issues? No worries! Please reach us via these channels. Our customer
services team is more than happy to help.
Read User Manual Online (PDF format)
Loading......