ubiolabs AWC1102 Wireless Charging Stand User Manual
- June 6, 2024
- ubiolabs
Table of Contents
ubiolabs AWC1102 Wireless Charging Stand User Manual
Wireless Pad Features
Technical Specifications
-
Model: AWC1102
-
Input: 37.5W 15V / 2.5A DC
-
Output: Wireless：15W Qi / 10W / 7.5W / 5W
UsbA: 5V 2.4A -
Compatibility: Apple, Android, other devices with wireless charging
-
Charge Indicator: White/amber LED indicator
-
Dimensions: 2.2 x 2.2 x 4.2 inches
-
Weight: 10 oz.
Your wireless pad is designed to provide optimal power delivery for your wireless device:
- 10W Qi certified fast charging for Samsung Note9, S9+, S9, Note8, S8+, S8, S7 Edge, S7, S6 Edge, S7, S6 Edge, S6, Note5, LG G6, LGV30, Sony Xperia XZ2
- 7.5W Apple wireless charging for iPhoneX , iPhoneX Max, iPhoneX , iPhone X, iPhone 8, iPhone 8 Plus
- 5W charging for other compatible wireless charging devices
Wall Adapter Features
Technical Specifications
- Model: CHG1151
- Input: AC 110-240V, 50-60 Hz
- Output: 37.5W 15V2.5A DC
- Dimensions: 2.28 x 2.28 x 1.06inches
- Weight: 4.1 oz.
Important Safety Instructions
WARNING – When using this product, basic precautions should always be followed, including the following:
-
Read all manufacturers instructions before using this product.
-
To reduce the risk of injury, close supervision is necessary when the product is used near children.
-
Do not put fingers or hands into the product.
-
Do not expose wireless pad to moisture, rain, or snow.
-
Use of a power supply or charger not recommended or sold by wireless pad manufacturer may result in a risk of fire or injury to persons.
-
Do not use the wireless pad in excess of its output rating. Overloaded outputs above rating may result in a risk of fire or injury to persons.
-
Do not disassemble the wireless pad. Take it to a qualified service person when service or repairs are required. Incorrect reassembly may result in a risk of fire or injury to persons.
-
Do not expose the wireless pad to fire or excessive temperature. Exposure to fire or temperature above 122°F may cause explosion.
The wireless pad’s working temperature is ≤104°F. -
Have service performed by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the product is maintained.
NOTE: This equipment has been tested and found to comply with the limits
for a wireless power charger, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on acircuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Warranty
At Ubio Labs we are dedicated to designing and manufacturing products with superior performance and 100% customer satisfaction. All of our products come with a 1 year limited warranty from date of purchase.
At Ubio Labs, we are always improving our products’ features and functionality, we reserve the right to change specifications at any time without notice.
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC WARNING
This device contains licence-exempt transmitter(s)/ receiver(s) that comply
with Innovation,Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device
The distance between user and products should be no less than 10cm