ubiolabs WCB263 3-In-1 Wireless Charging Stand Owner’s Manual

June 6, 2024
ubiolabs

WCB263 3-In-1 Wireless Charging Stand
Owner’s Manual

3-in-1 Wireless Charging Stand for ‘Phone’, Apple Watch`, and AirPodsr with USB-C Output
Owner’s Manual and Safety Instructions

Wireless Stand Features Features

  1. Apple Watch Charging Module
  2. Watch Band Loop
  3. Wireless Charging Surfaces
  4. LED Charge Indicators
  5. DC Power In
  6. USB-C Output

Technical Specifications

  • Model: AWCI110
  • Input 18Vin: 3.5A
  • Output (Wireless Charging Stand): 15W! 1OW/ 7.5W/ SW
  • Output (Wireless Charging PadIOWf 7.5W SW
  • Output IUS13-C PD 3.0): 5V=. 3N 9Vm. 2.22A. 20W
  • Output (Magnetic Charge* 5W Charge
  • Indicators: White/ambe  LED indicator
  • Dimensions: TI5 x 56 x 99 mm (4.5 x 2.2 x 3.9 in)
  • Weight: 200 g (71 oz)

Your wireless stand is designed to ormerde optimal power delivery for your wireless device:

  • 15W Oicertified fast charging for Samsung Galaxy 56 and later. Samsung NoteS and later, Motorola, L6
  • 10W wireless charging for Phone 8 and later
  • 7.5W wireless charging for other compatible devices
  • All Apple Watch Models
  • Wireless Charging Case for AirPods and AirPods Pro

Wall Adapter Features

Technical Specifications

Model: CH611475G
Input:110-240V AC. 50-60 Hz. 1.3 A
Output 63W. DC 18V. 3.5A
Dimensions: 79.7 x 77.5 x 28.5 mm (3.14 x 31 x 1.1 in)
Weight 110 g (3.9 oz)
SAVE THESE INSTRUCTIONS

Warranty

At Ubio Labs, we are dedicated to designing and manufacturing products with superior performance and 100% customer satisfaction. All of our products come with a 1-year limited warranty from the date of purchase.
We are always Improving our products’ features and functionality. We reserve the right to change product specifications at any time without notice.
(Phone, AirPods, AirPods Pro, Wireless Charging Case, and Apple Watch are trademarks of Apple Inc., registered in the U.S. and other countries.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

Important Safety Instructions

This device complies with Part 15 of the FCC Rules. Operation Is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to pan 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there Is no guarantee that interference will not occur In a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment Into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device has been evaluated to meet general
RF exposure requirements.
To maintain compliance with RSS102 — Radio Frequency (RF) Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
This device is incompatible with the following products: HUAWEI MatePad Pro (MRX-AL09, MRX-AL19)
• A blinking amber LED indicates a foreign object has been detected (metal objects like keys, coins, magnets, etc.) and the device is automatically turned off to ensure safety. Removal of foreign objects and proper alignment of the phone will result in normal operation.

DO NOT RETURN TO THE STORE
Our customer service team is here to help.
Model: WCB263 / WCB263E AWC1110
www.ubiolabs.com
supportitubiolabs.com
1-866-642-4428 (Monday – Friday 9am – 4:30pm PST) 2821
Northup Way. Suite 250 Bellevue. WA 98004

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals