ubiolabs UTL1004 Road Hazard Light Bundle Owner’s Manual

ubiolabs UTL1004 Road Hazard Light Bundle

Wall Charger Technical Specifications

• Model: CHG1087
• Input AC: 110-240V, 50-60Hz
• Output: 18W 9V/2A with Hardwired 6FT cable and 3.5mm (M) DC Coaxial Connector
• Dimensions: 57.5mm x 43.22mm x 26.15m (1.96″ X 1.7″ X 1.02″)
• Weight: 80g (with cable)

Charging Case Technical Specifications

• Model: CAS1022
• Input DC 9-24V/2A via 3.5mm canon connection
• Outputs: 3 x USB-C (M), 5V/1A
• Dimensions: 237mm X 130mm X 81mm
• Weight: 260g

Features

1. Mesh Storage Pouch
2. USB-C Connectors
3.  DC Input

Car Adapter Technical Specifications

• Model: CHG1176
• Power Input DC: 9-24V, 2A Max.
• Cable Length: 6 ft (2m)
• Weight: 62g

Charging Your Lights

Open the case to access the lights and charging ports. Align each light with the port and gently press into place. The white lights blink to indicate current battery capacity. When the hazard lights are fully charged, the lights will remain on until USB-C cable is removed. Close the case, being sure to zip shut If using the wall adaptor, connect the AC adaptor to the input at the back of the case, then
connect the wall adaptor to an outlet. If using the car adaptor, connect the AC adaptor to the input at the back of the case, then connect the car adaptor to an outlet in the vehicle. At Ubio Labs, we always continue to improve our products’ features and functionality. We reserve the right to change specifications at any time without notice.

ATTENTION PLEASE!
We know you are excited to get charged up with Ubio, but for optimal battery performance please fully charge your power bank before use or storage.
Warranty
At Ubio Labs we are dedicated to designing and manufacturing products with superior performance and 100% customer satisfaction. All of our products come with a 1 year limited warranty from date of purchase.

Lights Technical Specifications

• Model: UTL1004
• Burn Time (Hours): 10 High, 150 Low
• Cell Type: Lithium Ion Polymer 2,600mAh
• Input: USB-C, 5V/1A
• Battery Indicators: 4 white LEDs, each indicating 25% capacity
• Brightness: 150 Lumens Max
• Dimensions (each): 3″ x 3.5″ x 1.25 inches
• Weight : 125g

Features

Battery Status LED Indicator

LEDs show the remaining battery level of 100%each light A single blinking light indicates 75% there is less than 25% charge remaining. 50%

Lighting Modes

Pressing the “Light” Button

LIGHT

1. Low wMe light
2. Medium white light
3. Maximum white light
4. Turn light off

Placing the Lights

Use the easy fold out stands to set your lights on a level surface. Use the magnets to attach to your vehicle or similar surface.
Note: Keep away from flame.

Important Safety Instructions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: When using this product, basic precautions should always be followed, including the following:

• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary when the product is used near children.
• Do not put fingers or hands into the product.
• Do not expose light to rain or snow.
• Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of fire or injury to persons.
• Do not use the light that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
• Do not disassemble the light. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
• Do not expose a light to fire or excessive temperature. Exposure to fire or temperature above 212°F may cause explosion.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
• Switch off the light when not in use.
• Do not use this light during driving. Use only as auxiliary equipment after your vehicle has stopped safely.
• This product cannot replace a car safety triangle, it is not a waterproof product.

CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45°C or Incinerate. Follow Manufacturer’s Instructions.

Important Safety Instruction when using batteries:
Rechargeable batteries are only to be charged under adult supervision. Do not incinerate.
Battery Disposal:
The hazard lights contain rechargeable batteries which cannot be replaced or removed by user. When disposing of the product all state and local rules and regulations must be followed.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>