Banggood 4 Inch Toothpick FPV Drone STICK4
- June 6, 2024
- banggood
Table of Contents
Banggood 4 Inch Toothpick FPV Drone STICK4
- Brand Name: AURORA RC
- Drone Name: STICK4
- Flight Controller: F411 AIO 30A Upgrade firmware version:MATEKF411
- ESC: BLHELI S 30A (built-in)
- Motor: T-MOTOR F1507 2700KV
- Propeller: Gemfan Flash 4032-3
- Camera: CADDX.US Turbo EOS2
- VTX: 25-50-100-200-400mW 40CH
Power control
Press and hold the key for 6 seconds and the R light flash, then press the key to change the power level 25mw/50nW/100mw/200mW/400mW.
FLIGHT CONTROLLER
FRENQUENCY AND OUTPUT POWER CONTROL
Frequency and power control methods with BF OSD, you can change it with your
transmitter.
Key frequency control: Press the key to change the CH1-8. Press and hold
the key for 3 seconds and the C4 light flash, then press the key to change the
frequency group FR(A-R).
CONNECT TO THE TRANSMITTER
BNF-Frsky D16 mode
- Turn on the transmitter while holding the F/S button on the module (please refer to the module instruction manual for switch positions). Release the button. The RED LED on the Module will flash, indicating the transmitter is ready to bind to the receiver.
- Connect battery to the XM+receiver while holding the F/S button on the receiver.The LED on the receiver will flash,indicating the bindingprocess is completed.
- Turn off both the transmitter and the receiver.
- Turn on the transmitter and connectthe battery.The GREEN LED on the receiver indicates the receiver is receiving commands from the transmitter. The receiver/transmitter module binding will not have to be repeated, unless one of the tow is replaced.
BNF-Flysky AFHDS 2A
- Press and hold the receiver BIND key then plug in battery, when the light flashes, the receiver enters the code state,release the BIND key;
- Use the transmitter to enter the code mode；
- when the receiver`s light flashs from fast to slow means the success of the code;
- Restart the transmitter, reenergized the drone ,when the receiver`s light is on , the connection is done;
- The light is on when working.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>