YITAHOME SL-T010 2 Pack Horses Saw Installation Guide

YITAHOME SL-T010 2 Pack Horses Saw

Product Information

Specifications

• Product Name: Pure & Easy
• Assembly Instructions: Included
• Usage: Cutting or storage of materials
• Adjustable Legs: Yes
• Material Support Pegs: Yes
• Clamp Splice: Optional
• Jobsite Table: Yes
• Sawhorses: 2
• Sacrificial 8X8cm: Yes

Product Usage Instructions

Assembly Instructions

1. To extend the first legs, press the “Open 1st” button while supporting the legs with the other hand.
2. Push down the leg brace until it is fully locked out. Verify that the top of the legs lock solidly against the body.
3. Repeat steps 1 and 2 to fold down the second pair of legs.

Adjustable Legs
On each leg, pull the cam lever to unlock the lower leg. Slide the lower leg up and down to the desired height. Make sure the locking tooth is engaged with a corresponding hole in the upper leg. Close the cam lever to lock it in place.

Material Supports
Fold out the material support pegs to hold material for cutting or storage.

Clamp Splice Installation
According to the desired height demand, you can install the clamp splice by following these steps:

1. [Step 1]
2. [Step 2]
3. [Step 3]
4. [Step 4]

Jobsite Table
Create a solid jobsite table with 2 sawhorses. Insert two wood crossbeams into the lumber slots, spanning the sawhorses.

Sacrificial 8X8cm
A sacrificial 8X8cm can be screwed to the top of the sawhorse to prevent cutting damage. Flip-down spacers in the slots allow crossbeams to stay level with the sacrificial 8X8cm.

FAQ

Q: How many sawhorses are included with the Pure & Easy product?
A: Two sawhorses are included.

Q: Can the legs be adjusted to different heights?
A: Yes, the legs are adjustable for desired height.

Q: What is the purpose of the material support pegs?
A: The material support pegs are used to hold materials for cutting or storage.

ASSEMBLY INSTRUCTIONS

1. To extend the first legs , press button while supporting legs with other hand.
2. Push down leg brace till it is fully locked out.Verify that the top of the legs lock solidly against the body.
3. Repeat steps 1 and 2 to fold down the second pair of legs.
4. Adjustable Legs On each leg, pull the cam lever to unlock the lower leg. Slide the lower leg up and down to the desired height.Make sure the locking tooth is engaged with a corresponding hole in the upper leg. Close the cam lever to lock in place.
5. Material Supports Fold out the material support pegs to hold the material for cutting or storage.
6. According to the using height demand,could install the clamp splice as follows.
7. Create a solid jobsite table with 2 sawhorses.Insert two wood crossbeams into the lumber slots,spanning the sawhorses.
8. Sacrifici al 8X8cm can be screwed to top of the sawhorse to prevent cutting damage. Flip-down spacers in the s lots allow crossbeams to stay level with the sacrificial 8X8cm.
9. Jobsite Table Place a sheet of plywood across the 8X8cm and sawhorses making sure the plywood is fully supported on all sides.

Thank you for purchasing the toughbuilt SL-T010 Sawhorse. For your safety, please ensure you read these instructions carefully before use,and keep these instructions in the workspace where the sawhorse will be used at all times. Safe Operation and Use of this Sawhorse

• When lifting the saw horse use proper lifting techniques to avoid personal injury.
• Ensure the work area is well-lighted while working.
• Ensure the sawhorse is standing on a level surface that is clear, dry and free of debris.
• Ensure all 4 legs have solid contact with the floor.If the sawhorse is not positioned level and straight,loads placed upon it could fall, potentially causing damage to the item(s) loaded on it,and possibly severe personal injury or death.
• Ensure the load placed on any sawhorse does not exceed the applicable Safe Working Load Rating. Overloading can lead t o failure of the sawhorse, potentially causing damage to the item( s) loaded on it,and possible severe personal injury or death.
• Never stack sawhorse ses to obtain extra height.

Caution : Do not apply weight in excess of 590 kg of uniformly distributed load on Sawhors e.Do not use as a step ladder or standing platform.

Uniformly-D istributedLoad
The maximum uniformly distributed load across the top rail of the sawhorse, PER EACH

SAWHOR SE
This means that the maximum weight that can be applied to this sawhorse,per lineal foot,as is stated on the Retail Sticker and the instructions .”Uniformly-Distributed Load” means when all the weight is distributed evenly on the top rail.The amount of weight that can be applied to 2 identical sawhorses is double this value.For example a pallet or skid weighting not more than two times the Safe Working Load Rating can safely be carried by 2 of these sawhorses.

Warning!
To reduce the risk of personal injury,read and understand the instructions. Sawhorse legs must be fully open with the cross brace locked down.Do not stand on a sawhorse.Do not overload.Maximum capacity 590 kg.Use only on a flat, dry,hard and level surface.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>