Ningbo Gecen Promotion Gift SA329 Bamboo Wireless Charging Phone Stand Instruction Manual
- June 6, 2024
- Ningbo Gecen Promotion Gift
Table of Contents
Bamboo wireless charging phone stand
Instruction Manual
SA329
- Wireless Charging Pad
- Charging Input Port
What’s included
1x Wireless Charging Pad
1x USB to Micro-USB charging cable
1x Instruction Manual
Tech Specifications
Total Input DC 5V/2A
Wireless Input/Output DC5V 1A/0.7A 60cm standard black color Micro-USB cable
Instructions
-
Use a certified USB adapter conned the
a. provided Micro-USS cable to the USB adapter.
b. Ues Micro-USS tip to connect to the input port on the charging pad. -
Charging mobile devices:
a. Check your phone or tablet supporting wireless charging, it will be listed in the manufacturer’s specifications
b. Simply place the enabled device atop the wireless charging pad. Your device should show the charging indication
c. when completely charged. remove the device from the charging pad.
Note: In order to charge devices use only the accessory cable or the cable included with your own device by the manufacturer.
Safety Precautions
WARNING-when using this product, basic precautions should always be followed:
- Read all the instructions before using the product
- To reduce the risk of injury. close supervision is necessary when the product is used near c.hildrn
- Do not expose the device to moisture.
- Do not use the device in excess of its output rating. Overload outputs above rating may result in m a risk of fire or injury.
- Do not use the device if damaged or modified.
- Damaged or modified batteries may exhibit unpredictable behavior resulting in fire explosion or risk of injury.
- Do not disassemble the device Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury
- Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures above 212F° may cause an explosion.
- Have servicing performed by a qualified repair person using only identical replacement parts.
- This will ensure that the safety of the product is maintained.
- Do not overcharge phone Unit may get hot with excessive use. Remove phone when it is fully charged. Never charge for more than 7 hours at a time
FCC STATEMENT
NOTE This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the. equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures
– Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>