Banggood WF-007Bpro Tuya Bluetooth Smart Fingerprint Electronic Lock User Manual
- October 27, 2023
- banggood
Table of Contents
Banggood WF-007Bpro Tuya Bluetooth Smart Fingerprint Electronic Lock
Normal Functions
- Capacity: fingerprint 40pcs, password 40groups, card 40pcs.
- Waking up the lock by touching the keypad for 2s.
- Press “1#” to enter network connecting (the lock must haven’t connected to any smartphone), 60s is to timeout.
- Press “2#” to set users on the fingerprint lock(it must be before connecting the tuya app), the timeout is 10s.
- Press “3#” to open normal open mode. (Note: if there is an administrator, need to verify the administrator.) The normal open mode will be closed when you open the lock with any valid user information.
- Press “4#” to change the language: to Chinese/English. (Note: if there is an administrator, need to verify the administrator.)
- Press “5#” to adjust the volume. There are four levels of volume: 1# to 4#, and the voice is from low to loud. (Note: if there is an administrator, need to verify the administrator.)
- Press “6#” to restore the factory setting( have to close all Phone Bluetooth), the timeout is 10s. If all users were set by the tuya app.
- Click the resetting button which is on the bottom right corner of the battery box for 5s to restore the factory setting. If you set up the user’s information on the fingerprint.
- The initial password is 666666.
- The”*” key is an exit key.
There are two ways to set up users’ information:
- One is setting on the fingerprint lock.
- One is set by the tuya smart App. (we recommend you to choose this way to set up users’ information.)
How to set up users’ information on the fingerprint lock:
- waking up the lock by touching the keypad for 2s;
- Press “2#” to enter the setting user interface. (if there is a administrator, please verify the administrator.)
- Setting fingerprint user: put your fingerprint into the fingerprint reader 5 times, until it sounds like entering a success. ( Note: please make sure the inputting location of the fingerprint is different each time to ensure the integrity of fingerprints)
- Setting password user: enter 6 bits password twice, then you will hear entering success.
- Setting card user: put IC Card on the card area, then you will hear entering success.
- Setting remote controller(optional): press any button on the remote controller.
- Connecting the lock with the tuya smart app: please refer to the following steps.
How to set up users’ information with the tuya smart app:
App Installation
- Download and install the “Tuya Smart” APP from the application market.
- After installation, follow the prompts to register and log in.
Connect the lock with the tuya smart app:
- Open the Bluetooth and the Location of your smartphone
- Waking up the lock and press “1#”
- Open the tuya smart app, and the device will automatically pop up, the device name is “smart-lock”, please add the device.
Member Management
-
Add Family Member:
Click “Member Management” on the unlock interface and select “+” in the upper right corner of the interface. Please select “Family Member” and click “Add” to add a family member. Please enter your family name and his account of tuya smart app, then click “save”, and he will receive your invitation.
When your family member receives your invitation, click the invitation message, and click “accept”, (or go to “Me”→”Home Management”→Find the family where they are located, and accept the invitation), then they have shared the lock. Then they can click the lock name to enter the lock’s operation interface to open the lock.
-
Add another member (for limited-time users)
Click “Member Management” on the unlock interface and select “+” in the upper right corner of the interface. Please select “other Member” and click “Add” to add another member. The time limit and effective date must be set. These other members can’t open the lock when the lock is out of power. The administrator has to update data in the tuya app, then this other member can open the lock .
-
Setting up user information
Click “Settings” on the unlock interface
Setting up fingerprint users:
Select “fingerprint management” on the settings page, then click “add
fingerprint” to select the user ( if you haven’t set up a administrator on the
fingerprint lock, you must select the administrator user.) Please follow the
prompts to put your fingerprint into the fingerprint reader 5 times, then will
hear entering success.( Note: please make sure the inputting location of the
fingerprint is different each time to ensure the integrity of fingerprints
).
Setting up password users:
Select “password management” on the settings page, then click “add a password”
to select the user, then follow the prompts to enter 6 bits password and
user’s name (password can be randomly generated or entered by the user), and
click save, then will hear entering success. The phantom passwords Length is
20 bits.
Setting up card users:
Select “card management” on the settings page, then click “add card” to select
the user, then follow the prompts to put the IC card on the card area of the
fingerprint lock. You will hear entering success, then enter the card use’s
name and click “Done”.
Generate dynamic passwords:
On the unlock interface, swipe your finger left to enter the next interface
and click “Obtain dynamic password” to generate a dynamic password. Enter the
password on the lock to open the lock.
Restore factory settings and unbind
There are two methods to operate.
Operate in the lock:
- Click the resetting button which is on the bottom right corner of the battery box for 5s to restore the factory setting. (if you set up users’ information on the fingerprint lock, you can restore the factory settings on the lock this way).
- Press “6#” to restore the factory setting( have to close all Phone Bluetooth), the timeout is 10s. (if you set up users’ information by the tuya app).
Operate in the app:
The lock is connected to the Tuya APP.
On the unlock page, click the “edit” on the top right corner, then click”
remove device”–” Disconnect and wipe data”–” confirm”.The lock will be
completely restored to factory settings.