SCANSTRUT ROKK Wireless Sub SC-CW-07E Installation Guide
- June 6, 2024
- SCANSTRUT
Table of Contents
17-09-20 Issue 2
Installation Instructions
ROKK Wireless Sub (SC-CW-07E)
Parts List
|
---|---
Charger| Alcohol wipe
Techinhical Information
| Input voltage range : | 10-30V DC(12/24V system |
|---|---|
| Input currant max | 1.5A |
| Output | 5W (5V,1A) |
| Standby current draw | <0.03W |
| Certifications | Qi, CE,FCC, ROHS |
| Waterproof rating: | IPX6 front and back |
Tools Required
| Power drill
---|---
| 64/65mm(2.5″) Hole Saw)
| Straight router
READ THE IMPORTANT SAFETY INFORMATION LEAFLET BEFORE INSTALLING
Install options and cut out dimensions
Remove self-adhesive backing
Optional threaded locking ring available separately if self-adhesive is not suitable for the mounting surface. Part #: SC-CW-LOCK-01
Use an alcohol wipe to ensure the surface is free from dirt or grease and insert into the hole.
Overlay your choice of non-metallic surface, including wood, fabric, or marine traction surface. (Not provided). Maximum thickness ≤3mm. Ensure the charging logo is concentric over the charger.
Connect wires to 12-24V supply, ensuring a waterproof connection. Fuse appropriately according to the input voltage and current, check the product is functioning correctly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>