SCANSTRUT SC-CW-06E ROKK Wireless Waterproof Phone Charging Pocket Instruction Manual
- June 6, 2024
- SCANSTRUT
Table of Contents
ROKK Wireless – Nest. (SC-CW-06E)
Installation Instructions
Use of the bracket with unapproved products, or overloading, invalidates any bracket warranty.
Technical Information
Charge/Storage pocket
Max phone size: 176mm (6.92”) x 92mm (3.62”)
(Including case)
Wireless charger SC-CW-01E
Input voltage range :
Input current max:
Output power:
Standby current draw:
Certifications:| 10-30V DC (12/24V system
1.5A
5W (5V, 1A)
< 0.03W
Qi, CE, FCC, ROHS
---|---
Waterproof rating: IPX6 front and back
Parts list
Pocket| 
No6 (3.5mm) x 3/4” (19mm)
self-tapping CSK
Philips screw or mast sections outside the abo
---|---
Front bezel|
3 x 10mm Pan head
Philips Thread forming screw
SC-CW-01E-005
Wireless Charger| 
Drain Pipe 8mm (5/16”) internal diameter
(Optional, not included)
Tools Required
| Philips No. 2
screwdriver
---|---
| Power drill
| Jigsaw
| Drill bits
5mm (3/16”)
2.5mm (3/32”)
3mm (1/8”)
| Silicone Sealant
READ THE IMPORTANT SAFETY INFORMATION LEAFLET BEFORE INSTALLING
| Choose mounting
location ensuring it is adequate space behind the mounting surface.
---|---
| Cut out holes
and drill pilot holes using a paper template.
| 3 Install
wireless charger SC-CW-01E using x3 3mm x 10mm pan head Philips thread forming
screws provided.
| Optional Drain Pipe: Carefully drill drain holes using 5mm (3/16”) drill
bit. Attach drain pipe 8mm (5/16”) ID pipe, not included.
| Apply silicone
sealant generously around the flange, ensuring good coverage around the
perimeter.
| Secure with x4
No6. (3.5mm) x 3/4” (19mm) Self-tapping CSK Philips screws provided. Add
silicone sealant to screw holes.
| Attach front
bezel using x2 remaining 3 x 10mm Pan head Philips thread forming screws
provided.
| Connect wires
to 12/24V supply, ensuring a waterproof connection. Fuse according to input
voltage and current.
Drill x4 holes for No.6 Screws 
Suggested pilot holes
| Material | No. 6 Screw |
|---|---|
| Soft Material e.g Plywood | 2.5mm (3/32″) |
| Hard Material e.g acrylic hardwoods | 3mm(1/8″) |