urovo i2000 Smart Minipos Terminal User Manual

June 6, 2024
urovo

urovo - logourovo i2000 Smart Minipos Terminal

i2000
Smart Minipos Terminal
3.01.200.10168

Overview

Power on: Long press the power key until the device screen lights up. Off Screen: When screening on, press the power key, the screen will be turned off. To turn off device: Press the power button during operation until the device popup a menu, select “Power off”. Resume: Press the power key while the system is in sleep mode. Contactless card indicator: Show contactless card reading status.
Notice: If not use the device for a long time, please power off the device.
How to use a magnetic card reader
Magnetic card reader is located at the right side of the device. Please keep your hands steady when holding the terminal and swiping a card. When swiping the card, please make the magnetic stripe of the card contact to the magnetic block and quickly pass through the slot. Do not change swipe direction or move card up before finish reading,  Either way to swipe card is acceptable.
How to use IC card reader
IC card reader located at bottom of the terminal. Please let the metal IC side up when inserting the IC card into the slot. Keep inserting the IC card until feeling the card inserted to the end. Do not use strong force to plug the card. Caution: Do not pull out the card when the transaction is not completed yet.

How to read the contactless card
The reading area of the contactless card is located at the cover of the reading area. Recommended reading range is 0-3cm Please let the card printer. When reading a card, just let the contactless card close to the parallel with the reading area for better reading performance.

urovo i2000 Smart Minipos Terminal - contactless card

Package includes

  • Device x 1
  • Battery x 1
  • Power adapter x 1
  • USB cable x 1
  • Quick Start Guide x 1

SIM Card and TF Card installation instructions
Follow direction as figure, gently insert SIM card into the slot. Same procedure to TF card and PSAM.

urovo i2000 Smart Minipos Terminal - SIM Card

Caution:

  1. Please use a Nano card;
  2. Please not overexert when inserting SIM, TF, and PSAM cards.

How to install battery
Please be aware the battery pack is directivity. When installing the battery, please start with the top side. Insert top side first, then push battery top ward, let bottom side into battery container. Do not overexert or squeeze the battery. Close the battery door, battery door and rear cover should close tight and flat.

urovo i2000 Smart Minipos Terminal - install battery

Charging instruction

Plug the charging cable into the micro Type-c port of the device The power indicator will turn red when charging. The red light goes out when fully charged. If you charging /discharging frequently, we recommend using a charging cradle instead of a Type-c cable.
Battery tips

  1. After receiving the device (including batteries), we recommend the customer immediately start to use it, it couldn’t, store period should not exceed 3 months.
  2. Please always charge the battery in time after drain. Do not store the battery with the drain or in full condition. We suggest keeping battery capacity at around 50% when store.
  3. Please use the authorized charger to charge. Do not use 3rd party’s cradle or adapter.
  4. If not using the device for a long period of time please keep the battery and the device separately.
  5. The battery stored in a warehouse must charge/discharge once every 3 months, keep 60% to 70% capacity (i.e. 3.8V to 3.9V).
  6. Lithium-ion batteries should be stored in a cool, dry, ventilated environment, recommend to store between 0 to 28 degrees C.
  7. Do not use metal to contact or short circuit between two electrodes.
    Do not put the device into overheating, excessive tide, or decay environment.
    Do not squeeze or collide.

Transportation Notice

  1. It’s forbidden for transport when the temperature is higher than 65 C.
  2. The battery needs to be individually packed, do not directly stack without protection. Avoid battery electrodes’ contact to short circuit.
  3. Suggest isolating each battery with bags, paper, foam, or other isolation materials before packing in the carton.
  4. Fill the room the carton with cushioning material before packing to avoid shaking.

Instructions for connecting computer

  1. Use the USB cable to connect the device to a USB port on your computer.
  2. Open the notification panel and tap the USB connection icon.

urovo i2000 Smart Minipos Terminal - connecting
computer

After switching to “file transfer” mode, the PC side can conduct data transfer and storage in “My computer”. Remark: The device storage will be taken as a mobile disk by PC. as a result, if installed another external storage card, two removable disks will be seen on My PC.![urovo i2000 Smart Minipos Terminal

  • connecting computer](https://manuals.plus/wp- content/uploads/2022/01/urovo-i2000-Smart-Minipos-Terminal-connecting- computer-1-300x273.jpg)

Precautions

  1. Read all information in this guide before using the device to ensure safe and proper operation.
  2. Please use the accessories that have been approved by Urovo and correspond to this model. Use of any power source, charger battery, etc. that has not been approved by  Urovo may cause a fire, explosion, or other hazards.
  3. Please use the device and accessories within the specified temperature range. Equipment failure may occur when the ambient temperature is too high or too low.
  4. Do not disassemble the product and its accessories. If the equipment or any of its components are not working properly,
  5. The battery is made from a flammable and explosive material. Do not disassemble, squeeze, drop and make any other destructive operations on the battery. Do not place the battery in high temperatures.
  6. Disposal of used batteries is subject to local relevant documents or policies regarding the disposal of used batteries.

Warranty Policy

Thank you for using Provo smart terminal series products. In the situation of quality problems, which arise from raw materials or production processes, during normal use of purchased products,
UROVO TECHNOLOGY LTD. will be responsible for free maintenance within one year from the date of purchase.The company may provide repairs due to the user’s failure to use the product according to the provided instructions of the product. However, the corresponding service fee and the component fee will be charged.

Warranty Terms:

  1.  Under normal circumstances, the warranty period of the device is 12 months (3 months for accessories), subject to the sales agreement.
  2. During the product warranty period, under the normal use conditions (determined by our technical staff), the user will be entitled to a free warranty for damaged or faulty warranty parts.
  3. During the warranty period, faults caused by repair, disassembly or modification of the product by a person other than our company, improper installation, improper use by the user (failure to follow instructions), serial number damage, accident or natural disaster, will not be covered under the warranty.
  4. The warranty will expire immediately if any alterations are made to the warranty card.
  5. Please show the equipment SN and purchase a certificate for repair. The company reserves the right to interpret the above contents.

urovo i2000 Smart Minipos Terminal - Warranty Policy

UROVO TECHNOLOGY LTD.
Website: en.urovo.com

Note: The contents of the manual are subject to change without prior notice

FCC Caution

§ 15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a  particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
§ 15.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Body-Support Operation
This device was tested for typical body-Support operations. To comply with RF exposure requirements, a minimum separation distance of 1.0 must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals