urovo DT50S Mobile Data Terminal User Manual
- June 16, 2024
- urovo
Table of Contents
urovo DT50S Mobile Data Terminal
Product Information
Specifications
- Scanner LED
- System LED
- Receiver
- Front Camera
- Touch Screen
- Rear Camera
- Loudspeaker
- Fingerprint (Options)
- Pogo pin
- Rear cover lock
- PTT Custom Button
- Scan Button
- Volume Up + Volume Down-
- Earphone jack
- Power Button
- Scan window
Package Contents
- Device x 1
- Battery x 1
- Power adapter x 1
- Quick Start Guide & Warranty Policy x 1
- USB cable x 1
Setting Up Your Smart Terminal
SIM Card, TF Card Installation Method
Use the silver tab on the top left corner to pull out the SIM card/TF card holder. Place the SIM card and TF card into the respective slots (as shown). Push the holder in completely:
- TF Slot Nano SIM Slot 1
- Card Tray Nano SIM Slot 2
Note: SIM card 1, 2 are Nano SIM cards.
Battery Installation
- Install the battery in the direction as shown.
- Place the back cover fully, then push the lock buckle to the right (lock).
Note: Overexertion should be avoided when installing or removing the battery.
Power Options
- Power on: Press and hold the power button until the device vibrates.
- Shutdown: Press and hold the power button until the shutdown prompt appears. Click Shutdown.
- Forced restart: Press and hold the power button for 10 seconds.
Do not press the shutdown prompt. The device will restart.
USB Data Cable Charging
Connect one end of the USB cable to the adapter and the other end to the device. Charging cradle is recommended for convenientcharging.
PC Connections
Connect the device to PC using the USB cable provided. If additional drivers are required, the PC will automatically download them from the internet. Once the USB port has been connected, drag the notification bar from the top of the screen to display the USB setting interface.
- Tap this to activate developer menu shown. (Figure 1)
- Tap this to activate USB preference menu shown. (Figure
- Select “This device” to access device storage.
- Select “Connected device” to share device data with the computer.
- Select “Transfer images” to transfer images.
- Select “Charging” for charging the device.
- Click “Switch on debug mode” to enable debug mode.
On Windows PC, go to My Computer. Click on Removable Disk to view and transfer device data.
Note:
- When the device is a SLAVE connect to PC, ‘This device’ option will be automatically selected.
- When the device is a HOST connect to other devices, ‘Connected device’ will be automatically selected.
Precautions
- The battery is made from a flammable and explosive material. Do not disassemble, squeeze, drop, and make any other destructive operations on the battery. Do not place the battery in high temperatures.
- Disposal of used batteries is subject to local relevant documents or policies regarding the disposal of used batteries.
Warranty Policy
Thank you for using Urovo smart terminal series products. In the situation of quality problems, which arise from raw materials or production processes, during normal use of purchased products, UROVO TECHNOLOGY LTD. will be responsible for free maintenance within one year from the date of purchase. The company may provide repairs due to the user’s failure to use the product according to the provided instructions of the product. However, corresponding service fee and component fee will be charged.
FAQ
Q: How do I install the SIM card and TF card?
A: Use the silver tab on the top left corner to pull out the SIM card/TF card holder. Place the SIM card and TF card into the respective slots (as shown). Push the holder in completely.
Q: How do I install the battery?
A: Install the battery in the direction as shown. Place the back cover fully, then push the lock buckle to the right (lock).
Q: How do I power on/off the device?
A: To power on, press and hold the power button until the device vibrates. To power off, press and hold the power button until the shutdown prompt appears, then click Shutdown. To force restart, press and hold the power button for 10 seconds.
Q: How do I charge the device?
A: Connect one end of the USB cable to the adapter and the other end to the device. Charging cradle is recommended for convenient charging.
Q: How do I connect the device to a PC?
A: Connect the device to PC using the USB cable provided. If additional drivers are required, the PC will automatically download them from the internet. Once connected, drag the notification bar from the top of the screen to display the USB setting interface. Follow the on-screen instructions to select the desired USBmode.
Overview
Package Contents
- Device x 1
- Battery x 1
- Power adapter x 1
- USB cable x 1
- Quick Start Guide & Warranty Policy x 1
Setting Up Your Smart Terminal
SIM Card, TF Card Installation Method
Use the silver tab on the top left corner to pull out the SIM card/TF card
holder. Place the SIM card and TF card into the respective slots (as shown).
Push the holder in completely:
Note: SIM card 1, 2 are Nano SIM cards.
Battery Installation
- Install the battery in the direction as show.
- Place the back cover fully, then, push the lock buckle to the right(lock).
NOTE: Overexertion should be avoid when installing or removing the battery.
Power Options
Power on: Press and hold the power button until device vibrates. Shutdown:
Press and hold the power button until the shutdown prompt appears
Click“Shutdown”.
Forced restart: Press and hold the power button for 10 seconds. Do not press
the shutdown prompt. Device will restart.
USB Data Cable Charging
Connect one end of the USB cable to the adapter, and the other end to the device. Charging cradle is recommended for convenient charging.
PC Connections
Connect device to PC using the USB cable provided. If additional driver is required, PC will automatiaclly download from internet. Once the USB port has been connected, drag the notification bar from the top of the screen to display the USB setting interface.
- Tap this to activate developer menu shown.(Figure 1)
- Tap this to activate USB preference menu shown.(Figure 2)
On Windows PC, go to“My Computer”. Click on“Removable Disk” to view and transfer device data.
Note:
- When the device as a SLAVE connect to PC, ‘ This device ‘ option will be automatically selected.
- When the device as a HOST connect to other devices,’Connected device’ will be automatically selected.
Indicator
Precautions
- Read all information in this guide before using the device to ensure safe and proper operation.
- Please use the accessories that have been approved by Urovo and corresponds to this model. Use of any power source, charger, battery, etc. that has not been approved by Urovo may cause a fire, explosion, or other hazards.
- Please use device and accessories within the specified temperature range. Equipment failure may occur when the ambient temperature is too high or too low.
- Do not disassemble the product and its accessories. If the equipment or any of its components are not working properly,
- The battery is made from a flammable and explosive material. Do not disassemble, squeeze, drop and make any other destructive operations on the battery. Do not place the battery in high temperatures.
- Disposal of used batteries is subject to local relevant documents or policies regarding disposal of used batteries.
Warranty Policy
Thank you for using Urovo smart terminal series products. In the situation of
quality problems, which arise from raw materials or production processes,
during normal use of purchased products,
UROVO TECHNOLOGY LTD. will be responsible for free maintenance within one year
from the date of purchase.The company may provide repairs due to the user’s
failure to use the product according to the provided instructions of the
product. However, corresponding service fee and component fee will be charged.
Warranty Terms:
- Under normal circumstances, the warranty period of the device is 12 months (3 months for accessories), subject to the sales agreement.
- During the product warranty period, under the normal use conditions (determined by our technical staff), the user will be entitled to a free warranty for damaged or faulty warranty parts.
- During the warranty period, faults caused by repair, disassembly or modification of the product by a personnel other than our company, improper installation, improper use by the user (failure to follow instructions), serial number damage, accident or natural disaster, will not be covered under the warranty.
- The warranty will expire immediately if any alterations are made to the warranty card.
- Please show the equipment SN and purchase certificate for repair. The company reserves the right to interpret the above contents.
FCC Caution
Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 10mm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or an approved antenna.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>