1Mii RT5066 Wireless Receiver and Transmitter User Manual
- June 6, 2024
- 1Mii
Table of Contents
audio Connecting Expert
Wireless Audio Transmitter Receiver Set
User Manual
In the box
Product overview
Wiring diagram
Control function
There is no need to press the power button when first use. After connecting to the power supply, both devices are ready to pair.
If you turn the receiver off by pressing the power button, please press the power button to turn it on next time.
STEP1
Connect R15066 transmitter to audio device and power on.
STEP2
Connect RT5066 receiver to speaker and power on.
STEP3
After power on, both indicators flash red and blue automatically which means
pairing. Once successfully paired, both indicators stay solid blue.
Indicator Working status
| pairing mode
---|---
| paired
FCC:
This device complies with part 15 pf the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference. Changes or modifications not expressly approved by 1Mii Ltd. will void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class 13 digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected.
- Consult the manufacturer or an experienced radio/TV technician for help.
This product, like other radio devices, emits radio frequency electromagnetic energy and operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
CE
1Mii Ltd. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53 /EU.
The full text of the EU declaration of conformity is available at the following internet address: www.lmii.com
In accordance with Article 10 (2) and Article 10(10), this product is allowed to be used in all EU member states.
Shenzhen 1Mii Technologies Limited Baoan District, Shenzhen 518100 China
EU Importer:
eVatmaster Consulting GmbH
Bettina. 3 0,60 32 5 Frankfurt am Main,Germany
Warranty
Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.
Disposal
Always dispose of the used appliance at a recycling center.
Do not dispose of the used appliance together with household waste
| EC | REP |
|---|
eVatmaster Consulting GmbH
Bettina. 30 60325 Frankfurt am Main, Germany
contact@evatmaster.com
Scan the code to get more information.
Manufacturer: Shenzhen Ankit Electronics Limited
Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St., Baoan
Dist., Shenzhen, China
Operator: ShenZhen 1Mii Technologies Limited
Address: Qianhai Complex A201, Qianwan Road 1, Qianhai Shenzhen-Hong Kong
Cooperation Zone, Shenzhen, China
We hope you never have the need, but if you do, our service is friendly and
hassle-free.
support@lmii.com
web: www.lmii.com
FCC ID:2AUFR-RT5066
MADE IN CHINA