ART SOUND ARBT22 Bazooka Speaker Instruction Manual

(Front Cover)
User Manual
ARBT22 Instruction Manual
Bazooka Speaker
—with smart phone stand
ARBT22

Before You Begin…

READ CAREFULLY AND KEEP THIS MANUAL

Caution
To ensure safe and proper use read all safety information before using the device. Only use with manufacturer-approved batteries, chargers, accessories, and supplies.

• THIS DEVICE IS NOT ATOY, keep away from children and pets.

• Do not disassemble, modify, or repair the device.

• Do not expose to extreme temperatures (heat or cold), open flames, humid, or wet conditions.

• Do not submerge in water.

• Low power may cause poor Bluetooth connection or sound distortion.

• Do not overcharge the battery.

• If using a USB adapter, make sure the adapter is not damaged.

• Do not allow the USB port or the connectors of the supplied USB cable to be exposed to dust or water, or to come into contact with any conductive materials such as liquids, metallic powders, etc.

• The speaker contains a built-in battery and should not be disposed of with regular household waste. Please consult the local authorities on the correct way to dispose of this device.
  In the Box

• ARBT22 – Wireless Speaker (x1)

• 2-in-1 Charging/AUX Cable (x1)

• User Manual (x1)

Location of Controls

Getting Started

Charging the Speaker
Plug the micro-USB connector of the included 2-in-1 charging/AUX cable into the charging/AUX port on the side of the speaker. Plug the USB (largest) connector into the USB port on a computer, or a 5V USB adapter (not included) and plug into a wall outlet.
The LED indicator will turn RED while charging and turn OFF when fully charged. When the speaker is low on power, a tone will be heard indicating that it needs to be recharged.
Powering ON/OFF

• Move the [Power] switch to power the speaker ON and OFF.
• When powered ON, the speaker will enter Bluetooth pairing mode, and will automatically re-pair to any available previously-paired device nearby.
  Changing Input Modes
  Press and hold the center of the [Playback] dial to switch between input modes.
  A TF card or USB device must be inserted or connected to switch to these modes.
  Adjusting Volume

In all modes, overall volume can be adjusted with the [Playback] dial on the side of the speaker. In AUX and Bluetooth modes, volume can also be controlled by your connected device.

• Press and hold the [Playback] dial to the right to increase volume.
• Press and hold the [Playback] dial to the left to decrease volume.

Adjusting Playback
In Bluetooth, FM radio, TF Card, and USB Device modes, playback can be controlled by the [Playback] dial on the side of the speaker.

• Press the center of the [Playback] dial to pause audio. Press again to resume.
• Press the [Playback] dial to the right to skip to the next track/station.
• Press the [Playback] dial to the left to skip to the previous track/station.

Bluetooth Pairing

1. Power the speaker ON. A tone will be heard and the speaker will enter Bluetooth pairing mode. The LED indicator will quickly flash BLUE.
2. Set your mobile device to search for Bluetooth devices. When the list appears, select ARBT22 from the found devices.
3. After a successful pairing, a tone will be heard, and the LED indicator will turn solid BLUE. After you begin playing music on the speaker, the LED indicator will begin slowly flashing BLUE.
   Using the AUXInput
   Insert the micro-USB connector of the included 2-in-1 charging/AUX cable into the charging/AUX port on the side of the speaker. Insert the 3.5 mm AUX jack end (smallest, round) into the headphone jack or 3.5 mm AUX output port on your media-playing device.
   Switch input modes until you reach AUX mode.
   In AUX mode, all playback will be controlled by your connected device.

(Fold Inward)

Using the FM Radio
Plug the micro-USB connector into the micro-USB charging port, and place the other connector where it will have a clear line of sight to the sky. This will allow the speaker to better receive radio frequencies.
Change input modes until you enter FM radio mode.
In FM radio mode, all playback will be controlled by the buttons on the speaker.

• Press the center of the [Playback] dial to start or stop automatically scanning & saving available radio stations. If it is not stopped, the radio will make a complete scan of and save all nearby radio stations with good reception.

• Press the [Playback] dial to the left and to the right skip through saved stations.
  Using a TF Card or USB Device
  To insert a TF card, insert a TF card into the TF card slot on the speaker with the metal contacts facing down, and push in until it clicks.
  To insert a USB device, such as a USB flash drive containing audio files, insert the USB device into the USB device port on the side of the speaker.
  Change input modes until you enter TF or USB mode. The speaker will automatically begin playing music off the device.
  Note: You must have a TF card or USB device inserted to switch to TF or USB input mode.
  In TF card and USB mode, all playback is controlled by the buttons on the speaker.

• Press the center of the [Playback] dial to pause and resume playback.

• Press the [Playback] dial to the left and to the right skip tracks.

Compliance Information

FCC Information
This device complies with Part 15 of the FCC Rules.
Caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  Radiation Exposure Information
  The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
  WARNING Li-ion Battery Inside

This product is fitted with a Li-ion battery. Do not damage, open, or dismantle the battery, and do not use it in damp and/or corrosive conditions. Use only compatible chargers. Never dispose of batteries in a fire, and never expose them to high temperatures. Do not expose the product to temperatures exceeding 60°C (140°F).

and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment.
| This symbol signifies and declares that this equipment has battery charging which complies with California CEC and energy efficiency.
| This symbol signifies that this is a wireless device powered by Bluetooth® technology.
| This symbol represents the FCC Declaration of Conformity and compliance.

(Back Cover)

Warranty Information

1-Year Limited Warranty Territory: the United States/Canada
LIMITED WARRANTY TO ORIGINAL CONSUMER
This product as supplied and distributed new by an authorized retailer is warranted by Southern Telecom, Inc. to the original consumer purchaser against defects in materials and workmanship (“Warranty”) as follows:
To obtain warranty service :

• Visit our customer support portal: www.customersupport123.com.
• Select the brand and model of your device
• Select “Service Request” and fill out the form to begin your inquiry
• Exchanges require dated proof of purchase from an authorized retailer
  Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier.
  Warranty service not provided
  This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modification including software modifications such as the installation of custom firmware. This warranty is voided in the event any unauthorized person opens, alters, or repairs this product. All products being returned to the authorized service center for repair must be suitably packaged.
  NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. THE DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM, OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON THE DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE -AT THE DISTRIBUTOR’S SOLE DISCRETION -ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL THE DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY INCIDENTAL, DIRECT INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES (SUCH AS BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA, OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, THE CONSUMER’S RECOVERY AGAINST THE DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY THE DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE.
  Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies.
  All product names, trademarks, and registered trademarks are the property of their respective owners. All company, product, and service names used in this document are for identification purposes only. Use of these names trademarks, and brands do not imply endorsement.

Designed in the US
Printed in China v1.
12-2021

Documents / Resources

| ART SOUND ARBT22 Bazooka Speaker [pdf] Instruction Manual
ARBT22, 2ABV4-ARBT22, 2ABV4ARBT22, ARBT22 Bazooka Speaker, Bazooka Speaker, Speaker
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>