ART SOUND AR1009 Disco Tailgate Speaker User Manual
- June 17, 2024
- ART SOUND
Table of Contents
- In the box
- Charging the Speaker
- Location of controls
- Using the speaker
- Playing Music
- Using as a wired speaker
- Troubleshooting tips
- Safety instructions
- Additional warnings and precautions
- Legal information
- Limited Warranty
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DISCO TAILGATE SPEAKER
AR1009
In the box
Charging the Speaker
- Attach the AC charging cord to the socket on the back of the speaker.
- Plug the AC charging cord into a wall socket.
- Turn speaker ON by pressing the Main Power switch.
- The LED charging indicator light will illuminate blue while charging. It will shut off when the speaker has completed charging.
Using a DC car charger (not included)
-
Before connecting a DC car charger, please make sure that the Main Power Switch is in the OFF position.
-
Unscrew the RED and Black DC Wire Harness until the metal contact below is exposed.
-
Place the wired end of the DC car charger against the metal post and tightly fasten the harness.
a. The striped WHITE wire is fastened to the RED post.
b. The solid BLACK wire is fastened to the BLACK post. -
Connect the DC car charger to your vehicle’s charging port.
-
Switch the speaker’s Main Power Switch to the ON position.
Location of controls
SIDE PANEL
-
[SELECT INPUT] button: Change playing mode: AUX mode, Bluetooth mode
-
[ ] button: Next track (in Bluetooth mode)
-
[ ] button:
• Quick press = play/pause (in Bluetooth mode)
• Long press= enter Bluetooth pairing mode or unpair
• Long press= mute volume (in AUX mode) -
[ ] button: Previous track (in Bluetooth mode)
-
Disco ball ON/OFF button
-
LED AUX indicator light
-
USB charging port
-
LED Bluetooth indicator light
-
Guitar Input jack
-
Guitar Volume knob
-
MIC Echo knob
-
MIC Volume knob
-
Karaoke ON/OFF button
-
MIC In jack
-
LED Power indicator light
-
Volume knob: turn left to decrease volume, turn right to increase volume
-
LED Charging indicator light
BACK PANEL
-
Main Power switch
-
AC Power switch
-
AC charging cord socket
-
Audio Input jacks
-
DC speaker harness
Pairing the speaker with a Bluetooth enabled device
- Turn the speaker ON by pressing the Main Power Switch on the back panel.
- Press the [SELECT INPUT] button. The voice prompt “Bluetooth pairing” will be heard as the LED Bluetooth indicator light turns on and blinks BLUE.
- Keep the speaker and Bluetooth enabled device within 3 feet of each other during the pairing process.
- Set your mobile phone or other Bluetooth enabled device to search for Bluetooth devices.
Onan IPhone
- Go to SETTINGS > BLUE TOOTH (Make sure Bluetooth is turned ON)
On a Blackberry
- Go to SETTINGS/OPTIONS > BLUETOOTH
- Enable BLUETOOTH (Make sure Bluetooth is turned ON)
On an Android Phone
- Go to SETTINGS > BLUETOOTH > MENU> Search for devices (Make sure Bluetooth is turned ON)
On other Cell Phones/Devices
- Review the instruction manual that came with your phone/device.
NOTE: If you would like to connect the speaker to another device, you
must disconnect the speaker from the currently paired device first. On your
device’s Bluetooth settings, select “AR1009,” then select “disconnect” or
“unpair”, or long press the [ HII] button.
When the speaker has been unpaired, repeat the pairing process.
Using the speaker
Powering ON/OFF
- Use the Main Power Switch on the back of the speaker to turn ON and OFF if the speaker has been fully charged.
- Use the AC Power switch on the back of the speaker to turn ON and OFF when the AC charging adapter is plugged in.
Adjusting the volume
Turn the Volume knob on the side of the speaker to the left to decrease the
volume. Turn it to the right to increase the volume.
Switching Modes
Press the [SELECT INPUT) button on the speaker repeatedly to switch between
modes:
- AUX (line in)
- Bluetooth
Disco Ball
Press to turn the disco ball light ON and OFF.
Guitar Input
Plug the jack of any electric guitar into the guitar input port to use as an
amplifier.
Guitar Volume
Adjust the volume of the connected guitar.
MIC Echo
Adjust the reverberation effect of the connected microphone.
MIC Volume
Adjust the volume of a connected microphone.
Karaoke
Press to enable the karaoke function. The Bluetooth or AUX signal will
automatically adjust to highlight vocals when a microphone is connected.
MIC In
Plug the microphone jack into the MIC In port to enable microphone use.
Charging devices
- Attach your device to the speaker’s USB port using your device’s USB charging cord.
- The device will start charging automatically.
- Check your device’s charging indicator for charging status.
Playing Music
To enjoy wireless music on your speaker, make sure you are connected to a
Bluetooth enabled device.
Once connected, you can control the music with the controls on your connected
device and on the speaker.
Play/pause
- Press the [II ] button to pause/resume play in Bluetooth mode.
Skipping tracks
- Press the [w] button to skip to the next track in Bluetooth mode.
- Press the [«] button to skip to the previous track in Bluetooth mode.
Adjusting the volume
Turn the Volume knob on the side of the speaker to the left to decrease the
volume. Turn it to the right to increase the volume.
Using as a wired speaker
- Connect the white and red AUX cable plugs to the white (L) and red (R) jacks on the back of the speaker, and the green plug of the cable to the other end to an external device’s headphone jack (smartphone, tablet, or MP3 player).
- 0pen a media player on your device and click on PLAY to start playing your music.
- Use the controls on your connected device to control music playback and volume.
****When a device is plugged into the Audio Input jock, the speaker controls have limited function.
Troubleshooting tips
I can pair the speaker with my Bluetooth device, but I cannot hear any music.
- Make sure your Bluetooth device supports A2DP profile.
- Tur up the volume on your Bluetooth device.
- You may have to unpair the speaker, then re-pair to your device.
I cannot get the speaker into Pairing Mode.
- Press the [SELECT INPUT) button until the LED Bluetooth indicator lights up. The voice prompt “Bluetooth pairing” will be heard and the LED indicator light will blink BLUE.
- The speaker is now in pairing mode.
My Bluetooth Device is not able to pair with the speaker.
- Keep the speaker and Bluetooth enabled device within 3 feet of each other during the pairing process.
- Press the (SELECT INPUT] button until the LED Bluetooth indicator lights up. The voice prompt “Bluetooth pairing” will be heard and the LED indicator light will blink BLUE.
- Check that YOUR device’s Bluetooth feature is turned ON.
- Try repeating the pairing process, see “Pairing the speaker with a Bluetooth enabled device”
Safety instructions
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all Instructions.
-
Do not use this apparatus near water.
-
Clean only with a dry cloth.
-
Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do0 not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. -
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachments/accessories specified by the manufacturer
-
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination during lightning storms or when unused for long periods of time.
-
Unplug the apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged; liquid has been spilled or objects have fallen into the apparatus; the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
WARNING: The mains plug is used as a disconnect device; the disconnect device shall remain readily operable.
-
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing, and objects filled with liquids, such as vases, shall not be placed on apparatus.
-
This ****automent is a Cass n or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
The li htning flash with arrowhead symbol, within an equilateral triangle is
intended to plert the user 14 e P esence g uninsulated angerous voltage within
t! e products enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of tena “opera ing and maintenance (servicing)
instructions in the literature accompanying
Additional warnings and precautions
- Battery shall not be exposed to excessive heat such as sunshine fire or the like. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
- Batterie (batterie ou piles install~es) ne doit pas ~tre expos~e ~ une chaleur excessive comme le soleil, le feu, etc. Danger d’explosion si la pile n’est pas remplac~e correctement. Ne remplacer que par le m~me type ou un type ~quivalent.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
CAUTION: Use of controls or adjustments or performance of procedures
other than those specified may result in hazardous radiation exposure.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
WARNING: Do not place this unit directly onto furniture surfaces with any
type of soft, porous, or sensitive finish. As with any rubber compound made
with oils, the feet of this unit may cause marks or staining where they
reside. We recommended using a protective barrier such as a doth or a piece of
glass between the unit and the surface to reduce the risk of damage and/or
staining.
WARNING: Use of this unit near fluorescent lighting may cause
interference regarding use of the remote. If the unit is displaying erratic
behavior move away from any fluorescent lighting, as it may be the cause.
WARNING: Shock hazard – Do Not Open.
WARNING:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Legal information
Caution: Any changes or modifications not expressly approved could void
the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Limited Warranty
90 Days Limited Warranty
In the unlikely event that this product is defective, or does not perform
properly, you may within ninety (90) days from your original date of purchase
return it to the authorized service center for repair or exchange.
TO OBTAIN WARRANTY SERVICE:
- Call the Customer Support number located below, or go to our website portal to receive an SRO number.
- Provide proof of the date of purchase within the package (Dated bill of sale).
- Prepay all shipping costs to the authorized service center, and remember to insure your return. include a return shipping address (no PO. Boxes), a telephone contact number, and the defective unit within the package.
- Describe the defect or reason you are returning the product.
Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier.
The shipping address of the authorized service center is:
Southern Telecom, Inc.
Attention: Customer Service (2nd Floor)
14-C53rd Street
Brooklyn, NY 11232
Should you have any questions or problems concerning this product, please
contact our customer service department at:
Customer Support:
Phone: 1-877-768-8481
Monday-Friday 8AM-10PM(EST)
****www.southerntelecom.com
Click on “Product Support”
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse,
improper installation or operation, lack of reasonable care, and unauthorized
modification. This warranty is voided in the event any unauthorized person
opens, alters or repairs this product. All products being returned to the
authorized service center for repair must be suitably packaged.
Limitation of Warranty
THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED,
NO VERBAL OR WRITTEN INFORMATION GIVEN BY AIT, INC. IT’S AGENTS, OR EMPLOYEES
SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
- REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. AIT, INC. SHALL NOT BE LABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE Or
THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY
ON THIS PRODUCT, THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE
GOVERNED BY THE LAWS OF THE STATE OF NEW YORK. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LMITED TO THE APPLICABLE
WARRANTY PERIOD SET FORTH ABOVE
Some states do not allow the exclusion nor limitation of incidental or
consequential damages, or limations on how long an implied warranty lasts so
the above limitations on exclusions may not apply to you. This warranty gives
you specific legal rights, and you also may have other rights that vary from
state to state.