ART SOUND EBT1-22090 TWS Fashion Pro Earbuds Instruction Manual
- June 9, 2024
- ART SOUND
Table of Contents
- ART SOUND EBT1-22090 TWS Fashion Pro Earbuds
- READ CAREFULLY AND KEEP THIS MANUAL
- In the BOx
- Location of Controls
- Getting Started
- Bluetooth Pairing
- Pairing Troubleshooting
- Powering ON/OFF
- Media Playback
- Phone Calls
- Activating Voice Assistant
- Storage & Maintenance
- FCC Information
- Radiation Exposure Information
- WARNING Li-ion Battery Inside
- Warranty Information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ART SOUND EBT1-22090 TWS Fashion Pro Earbuds
READ CAREFULLY AND KEEP THIS MANUAL
Caution
- To ensure safe and proper use, read all safety information before using the device. Only use with manufacturer-approved batteries, chargers, accessories, and supplies
- THIS DEVICE IS NOT A TOY, do NOT allow children or pets to use or play with this device.
- Do not disassemble, modify, or repair the device.
- Do not expose to extreme temperatures (heat or cold), open flames, humid, or wet conditions.
- Do not submerge in water.
- Low power may cause poor Bluetooth connection or sound distortion.
- Do not overcharge battery.
- If using with a USB adapter, make sure the adapter is not damaged.
- Do not allow the USB port or the connectors of the supplied USB cable to be exposed to dust or water, or to come into contact with any conductive materials such as liquids, metallic powders, etc.
- The case and earbuds include built-in batteries should not be disposed of with regular household waste. Please consult the local authorities on the correct way to dispose of batteries.
In the BOx
- ARTWS55-True Wireless Earbuds (L&R)
- Charging Case (x1)
- USB Charging Cable (x1)
- Instruction Manual (x1)
Location of Controls
Getting Started
Charging the Case
Insert the small connector of the included USB charging cable into the
charging port on the bottom of the case. Insert the large connector into a USB
power source such as the USB port on a computer, or into a 5V USB adapter (not
included) and plug into a wall socket. The LED indicator on the case will
flash RED while the case is charging, and turn solid RED when charging is
complete.
Charging the Earbuds
Use the included charging case to protect and charge your earbuds. To charge
the earbuds, open the case. Place the earbuds into the correct earbud charging
ports. The earbuds will automatically power OFF and begin charging. The
earbuds’ LED indicators will flash RED while they are charging and turn OFF
when they are fuly charged.
Bluetooth Pairing
- The earbuds will automatically power on and pair with one another when removed from the case. After a few seconds, a tone should be heard indicating that the earbuds have connected to each other.
- Open your device’s Bluetooth menu and select ARTWS55 when it appears.
- Another tone will be heard, indicating that the earbuds are successfully connected to your device. The LED indicators on LEFT earbuds will lash WHITE.
Pairing Troubleshooting
Trouble Pairing the Earbuds to Fach Other? Try these steps:
- Place both earbuds back into the case to power them OFF
- You may need to go into your device’s Bluetooth settings and manually “Forget” one or both of the earbuds, and turn your device’s Bluetooth OFF while the earbuds pair to each other.
- Turn your device’s Bluetooth back ON if necessary, and fllow the Bluetooth Pairing steps above again.
Powering ON/OFF
- When removed from the case, the earbuds will automatically power ON
- Long-Press (5s) either earbud’s [MULTIJ button, or the Povwer button on the case, to power the earbuds OFF
- Press either earbud’s [MULTI] button, or the Power button on the case, to power the earbuds ON
Media Playback
- Press either earbud’s [MULTI] button to PAUSE/RESUME playback
- 2x Press the LEFT earbud’s [MULTI] button to skip to the PREVIOUS song
- 2x Press the RIGHT earbud’s [MULTIl button to skip to the NEXT song
- Long-Press (1s) the LEFT earbud’s [MULTI] button to DECREASE the volume
- Long-Press (1s) the RIGHT earbud’s [MULTI) button to INCREASE the volume
Phone Calls
- Press either earbud’s [MULTI) button to ANSWER/END an incoming call
- Long-Press (1s) either earbud’s [MULTI] button to REJECT an incoming call
Activating Voice Assistant
If you have a voice assistant on your paired device, you can activate it using the controls on the earbuds or the controls on your device 3x Press either earbud’s [MULTIJ button to activate the voice assistant
Storage & Maintenance
When not using the earbuds, it is recommended that they are stored away in the charging case and placed in a safe, dry location, away from sources of water, light, heat, and dust. They are best stored in an airtight box or bag (not included). If the earbuds or case are dirty, gently wipe with a clean microfiber cloth. Do not clean with any liquid, solvent, or detergent.
FCC Information
Inis device complies with Part 15 of the FCC Rules.
Caution: Any changes or moditications not expressly approved could void
the user’s authority to operate the equipment.
Note: Ihis equipment has been tested and found to comply with the limits
for a Class B digital device, pur Suant to part 15 of the FCC Hules. I hese
limits are designed to provide reasonable protection against harmful
Interrerence in a residential instaation. Inis equipment generates, uses ana
can radlate radio frequency this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user iS encouraged to try to correct the
interference by one or more of the following measures:
- Heorient or relocate the receiving antenna.
- increase the separauon between the equipment ang receiver.
- Connect the equipment into an outlet on a circuit different Trom that to which the receiver is connected.
- Consult the dealer or an experienced radio/IV techniCian for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interterence, and
- this device must accept any interterence received, including interference that may cause undesired operation.
Radiation Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
WARNING Li-ion Battery Inside
This product is fitted with a Liion battery. Do not damage, open, or dismantle the battery and do not use it in damp and/or corrosive conditions. Use only With compatible chargers. Never dispose of batteries in a fire, and never expose them to high temperatures. Do not expose the product to temperatures exceeding 60C (140). FCC ID:2AS50-EBT1-22090 Rating Label Definitions This symbol signifies the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. This symbol signifies and declares that this equipment has battery charging which complies with California CEC and energy efficiency.
Warranty Information
90-Day Limited Warranty
Territory: United States/Canada
LIMITED WARRANTY TO ORIGINAL CONSUMER
This product as supplied and distributed new by an authorized retailer is
warranted by Southern Telecom, Inc. to the original consumer purchaser against
defects in materials and workmanship(“Warranty”) as follows:
To obtain warranty service:
- Visit our customer support portal: www.customersupport123.com
- Select the brand and model of your device
- Select “Service Request” and fill out the form to begin your inquiry
- Exchanges require dated proof of purchase from an authorized retailer
Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier.
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse,
improper installation or operation, lack of reasonable care, unauthorized
modification including software modifications such as the installation of
custom firmware. This warranty is voided in the event any unauthorized person
opens, alters or repairs this product. All products being returned to the
authorized service center for repair must be suitably packaged.
NO WARRANTIES, VWHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE – AT DISTRIBUTOR’S SOLE DISCRETION – ARE THE EXCLUSIVE REMEDIES OFTHE CONSUMER. IN NO EVENT WILL DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OFTHE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE.
Some countries, states or provinces do not alloW the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>