Art sound XO-9742 orb beats LED Wireless Speaker Instruction Manual
- June 5, 2024
- ART SOUND
Table of Contents
Art sound XO-9742 orb beats LED Wireless Speaker
READ CAREFULLY AND KEEP THIS MANUAL
Customer Support
or any questions or problems with your product, please visit our website at
SouthernTelecom.com and click on Product Support.
introduction
caution
To ensure safe and proper use, read all safety information before using the
device. Only use with manufacturer-approved baTteries, chargers, accessories,
and supplies.
- THIS DEVICE IS NOTATOY, keep away from children and pets.
- Do not disassemble, modify, or repair the device.
- Do not expose to extreme temperatures (heat or cold), open flames, humid, or wet conditions.
- Do not submerge in water.
- Low power may cause poor Bluetooth connection or sound distortion.
- Do not overcharge battery.
- it using with a USB adapter, make sure the adapter is not damaged.
- Do not allow the USB port or the connectors of the supplied USB cable to be exposed to dust or water, or to come into contact with any conductive materials such as liquids, metallic powders, etc.
- Do NOT place any metal object onto the charging pad.
- Magnetic strip cards, including credit cards, phone cards, identification cards and boarding passes may be damaged by the magnetic field it placed on or near this device.
- Do not place this device on or near a microwave or similar applance.
- The speaker contains a built-in battery and should not be disposed of with regular household waste.
- Please consult the local authorities on the correct way to dispose of this device.
In the Box
- AR1073- Wireless Speaker (x1)
- USB Charging Cable (x1)
- User Manual x1)
Location of Controls
Charging the Speaker
Plug the micro-USB connector (smaller) of the included charging cable into the
micro-UsB charging port on the side of the speaker. Plug the USEB connector
(larger) into a USB power source, or intoa 5v UsB adapter (not incfuded) and
plug into a wall outlet.
The speaker LED indicator will turn RED while charging and turn OFF when fully
charged. When the speaker is low on power, a tone will be heard indicating
that it needs tO be recharged.
Powering ON/OFF
Press the [ ©] button on the side of the speaker to power ON and OFF. When
powered ON, the speaker will enter Bluetooth pairing mode, and may
automatically re-pair to any available previously-paired device nearby.
Playing Music
To listen to music or audio on the speaker, you must be paired to an audio
device via Bluetooth® wireless. If you are pairing for the first time, see the
Bluetooth Pairing section of this manual. When connected, all volume &
playback adjustment will be controlled with your paired device.
Bluetooth Pairing
- Power the speaker ON. A tone will be heard and the speaker will enter Bluetooth pairing mode. The speaker LED indicator will quickly flash BLUE.
- Set your mobile device to search for Bluetooth devices. When the list appears, select AR1073 from the found devices.
- After a successful pairing, a tone will be heard, and the speaker LED indicator will slowly flash BLUE.
Using the LED Lights
- Press the [ Ø]button to turn the color-changing lights ON or OFF
- Press the []button to adjust night light brightness.
Warranty Information
90-day Limited Warranty
Territory: United States/Canada
LIMITED WARRANTY TO ORIGINAL cONSUMER
his product (including any accessories included in the original packaging as
supplied and distributed nevw by an authorized retaier is warranted by
Southern lelecom, Inc. to the original consumer purchaser against detects in
materials and Workmanship”warranty”) as followS To obtain warranty service:
VISit our website at www.southerntelecom.com
Click on Product Support
Select the Brand of your device
Select Service Request and till out the form to begin your inquiry
Your product will be repaired or replaced, at our option, for the same or
similar model of equal value if examination by the service center determines
this product is defective. Products received damaged as a result of shipping
will require yOu to file a claim with the carier.
Warranty service not provided
Ihis warranty does not cover damage resulting from accident, misuse, abuse,
improper installation or operation, lack of easonable care, unauthorized
modification including software modifications such as the installation of
custom firmware.This warranty is voided in the event any unauthorized person
opens, alters or repairs this product. All products being returned to the
authorized service center for repair must be suitably packaged.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE
EXPRESSLY DESCRIBEDP
ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE
EXPRESS WARRANTY
PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY
PERSON, FIRM OR ENTITY
WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR,
REPLACEMENI OR REFUND OF
THE ORIGINAL PURCHASE PRICE – AT DISTRIBUTOR’S SOLE DISCRETION- ARE THE
EXCLUSIVE REMEDIES OFTHE
CONSUMER. IN NO EVENT WILL DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY
INCIDENTAL, DIRECT,
INDIRECT SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED
TO, DAMAGES FOR
LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE
OR INABILITY TO USE
THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY.
NOTWITHSTANDING THE
OREGOING, CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE
PURCHASE PRICE OF THE
PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER
THAN THE ORIGINAL
CONSUMERWHO PURCHASEDTHE PRODUCT AND IS NOTTRANSFERABLE
Some countries, states or provinces do not allow the exclusion or limitation
of incidental or consequential damages or allow limitations on warranties, so
limitation or exclusions may not apply to you. This warranty gves you specific
legal rights, and you may have other rights that vary from state to state or
province to province. Contact your authorized retailer to determine AUNproduc
DamespkEademarks, and registered trademarks are property of their respective
owners. Al company, product, and service names used in this document are for
identification purposes only. Use of these names, trademarks, and brands does
not imply endorsement,
Compliance Information
FCC Information
This device complies with Part 15 of the FCC Rules.
Caution: Any changes or modifications not expressly approved could void
the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply ith thelimits
for a Class B digital device, pusuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against
harmfulinterference in a residential installation. Ihis equipment generates,
uses and can radiate radio frequency energy and, it not instaled and used in
accordance with the instructions, may cause harmrul interrerence to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interterence by one or more
oT the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interterence, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product complies with the requirements for Part 18 of the FCC Rules. Athough this product complies with FCC, it may interfere with other devices. If this product is found to intertere with another device, separate the other device and this product.
Radiation Exposure Information
The device has been evaluated to meet general HF exposure requirement. Ihe
device can be used in portable exposure condition without restriction.
WARNING Li-ion Battery Inside
This product is fitted with a Lin battery. Do not damage, open, or dismantle
the battery and do not use it in damp and/or corrosive conditions. Use only
with compatible chargers. Never dispose of batteries in a fire, and never
expose them to high temperatures. Do not expose the product to temperatures
exceeding 60C (140°).