ART SOUND ARTWS107 LED TWS Light Up Earbuds and Case Instruction Manual

ART SOUND ARTWS107 LED TWS Light Up Earbuds and Case

Before You Begin…

READ CAREFULLY AND KEEP THIS MANUAL

Caution
To ensure safe and proper use, read all safety information before using the device. Only use with manufacturer-approved batteries, chargers, accessories, and supplies.

• THIS DEVICE IS NOT A TOY, do NOT allow children or pets to use or play with this device.
• Do not disassemble, modify, or repair the device.
• Do not expose to extreme temperatures (heat or cold), open flames, humid, or wet conditions.
• Do not submerge in water.
• Low power may cause poor Bluetooth connection or sound distortion.
• Do not overcharge battery.
• If using with a USB adapter, make sure the adapter is not damaged.
• Do not allow the USB port or the connectors of the supplied USB cable to be exposed to dust or water, or to come into contact with any conductive materials such as liquids, metallic powders, etc.
• The case and earbuds include built-in batteries should not be disposed of with regular household waste. Please consult the local authorities on the correct way to dispose of batteries.

In the Box

• ARTWS107 – True Wireless Earbuds (L & R)
• Charging Case (x1)
• USB Charging Cable (×1)
• Instruction Manual (x1)

Location of Controls

Getting Started

Charging the Case
Insert the small connector of the included USB charging cable into the charging port on the back of the case. Insert the large connector into a USB power source such as the USB port on a computer, or into a 5V USB adapter (not included) and plug into a wall socket.

Charging the Earbuds

• Use the included charging case to protect and charge your earbuds.
• To charge the earbuds, open the case. Place the earbuds into the correct earbud charging ports. The earbuds will automatically power OFF and begin charging.

Powering ON/OFF

• When removed from the case, the earbuds will automatically power ON
• Alternatively, you may Long-Press (3s) the earbuds’ MULTI button to manually power them ON
• When replaced into the case, the earbuds will automatically power OFF
• Alternatively, you may Long-Press (5s) the earbuds’ MULTI button to manually power them OFF

Bluetooth Pairing

1. The earbuds will automatically power on and pair with one another when removed from the case. After a few seconds, a tone should be heard indicating that the earbuds have connected to each other.
2. Open your device’s Bluetooth menu and select ARTWS107 when it appears.
3. Another tone will be heard, indicating that the earbuds are successfully connected to your device.

Pairing Troubleshooting
Trouble Pairing the Earbuds to Each Other? Try these steps:

1. Place both earbuds back into the case to power them OFF.
2. You may need to go into your device’s Bluetooth settings and manually “Forget” one or both of the earbuds and turn your device’s Bluetooth OFF while the earbuds pair to each other.
3. Turn your device’s Bluetooth back ON if necessary, and follow the Bluetooth Pairing steps above again.

Media Playback

• Press either earbud’s MULTI button to PLAY/PAUSE media
• 2x Press the LEFT earbud’s MULTI button to skip to the PREVIOUS track
• 2x Press the RIGHT earbud’s MULTI button to skip to the NEXT track
• 3x Press the LEFT earbud’s MULTI button to DECREASE volume
• 3x Press the RIGHT earbud’s MULTI button to INCREASE volume

Phone Calls

• Press either earbuds’ MULTI button to ANSWER an incoming phone call
• Press either earbuds’ MULTI button to END an ongoing phone call
• Long-Press (2s) either earbuds’ MULTI button to REJECT an incoming phone call.

Voice assistant

• If your device has a voice assistant feature, Long-Press (2s) either earbuds’ MULTI button to activate the voice assistant

Compliance Information

FCC Information
This device complies with Part 15 of the FCC Rules.

Caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, f not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction.

WARNING Li-ion Battery Inside
This product is fitted with a Li-ion battery. Do not damage, open, or dismantle the battery SE CICL and do not use it in damp and/or corrosive conditions. Use only compatible chargers. Never dispose of batteries in a fire, and never expose them to high temperatures. Do not expose the product to temperatures exceeding 60°C (140°F).

Rating Label Definitions

• Direct current symbol.
• This symbol signifies the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment.
• This symbol signifies and declares that this equipment has battery charging which complies with California CEC and energy efficiency.
• Bluetooth This symbol signifies that this is a wireless device powered by Bluetooth® technology.

Warranty Information

90-Day Limited Warranty

Territory: United States/Canada

LIMITED WARRANTY TO ORIGINAL CONSUMER
This product as supplied and distributed new by an authorized retailer is warranted by Southern Telecom, Inc. to the original consumer purchaser against defects in materials and workmanship (“Warranty”) as follows:

To obtain warranty service:

• Visit our customer support portal: www.customersupport123.com
• Select the brand and model of your device
• Select “Service Request” and fill out the form to begin your inquiry
• Exchanges require dated proof of purchase from an authorized retailer

Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier. Warranty service not provided This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, or unauthorized modification including software modifications such as the installation of custom firmware. This warranty is voided in the event any unauthorized person opens, alters or repairs this product. All products being returned to the authorized service center for repair must be suitably packaged.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>