arpha EC-21BS-04 Wifi Battery Camera Kit User Guide
- June 6, 2024
- arpha
Table of Contents
EC-21BS-04 Wifi Battery Camera Kit
1 /SGTEATRTTIENDG
/ For HomeBase installation
/
-S
HomeBase
Powec Adaptec foe HomeBase
5
1 —
T
Ethemet Cable
For arphacam Installation
f /
‘
f
·
.
acphaCam
MIcro-USB Chaing @ble
A
WaII Mount
MountIng Scre and AnchO
1.Camera quandty and accessorles vaby bundle package. 2.HomeBase powe, adapte, va,les by ,egloc.
2/OPRVEORDVUIECWT
HomeBase
”
‘)}
t __ (
!
2 ,3 4 / 5
I
I
&
IIIIIIIIII
TF
,
1. Status LED 4.TF ca,d slot
2.Ethemet port
3.USB po
5.SynoReset batton
arphaCam
1. Lens 2. Light senso, 3. Motion sensor 4. Microphone
5. Status LED 6. lcfcaced LED
7. Spea 8. Mounting ho|e
9. Powe,oFF 10. Sync / Reset 11. Chacg;ng po
HomeBase
” ‘ –
i –
§ 9 } 0
StaM LED
“Ih
·Boot op, Red lht alwaysON
·Waiting foe netwok setting Red light fast blinking
.Network connecting:Green Iight fast b|inking
·Netwock connected, Gceen light alwaysON
·Abnocmal states, Red light slow blinking
uring firmware upgrade YeI|ow 1ight aIwaysON
arphaCam
3/TCHOENHNOEMCETBINASGE
Connect the HomeBase to the Internet
Powec oo the HomeBase ,theo cse the ethemet cable pcovlded to coooect the
HomeBase to yacc home coctec.
`;
The LED lcdlcatoc tums gceec (this may take up to 1mlc) whee Home Base Is
ready for setup.
Status LED, Boot op, Red light alwaysON Waiting for network setting:Red Iight fast bInking Netwo,k connecng:Green light fast blinking Notwo,k connected, G,oon light a'”aysON Abno,mal status, Red light slow blinking Du,ingmwa,o upg,ado, Yollow light ahNaysON Cha,ging status, White light alwaysON du,ing cha,ging/umOFF alto, fully cha,god
4/TSHEETSTIYNSGTEUMP
Download the App and Set up the System
1.Download the acpha app <com the App Stace (KlS devices ) oc Google Play
stoce ( Acdmld devices).
2.Make s,ce that yo,c smartphone ano the HomeBase ace connected to the same home m,tec,
Fl
1
1
·I
Sign up for a account and then follow the on screen Instructions (HomeBase)
3.La,nch the acpha app,click “Add Device”,then select’Seco,i
ty&Video 5″.veillance’,and follow the scceenshot below.
.1 2-
C · ·2
.”. · 1 “·
·
1 m
.’L,.
;’J
;’
d 22
4.Make sore the Red (ndlcato, on the dev(ce ls bHnkCng,then press
“Next Step. (If the op,lteon faCled,press the reset botton for over S
seconds)
1hpnl nm1
Add device of the Homebase (HomeBase)
Cu·····, D°’CO
‘De
o 0
“”
,”l,,,.,’
.,.
ms package kit Includes below pmduc 2.4G WlFl Home Base, BS-04 2.4G W1Fl Battecy Camern, EC0 Please ,eed ceceful befo,e sett;og up the prnduct
Add device of arphacam (arphacam)
5. select “Add Device” on the home page. (Please make sa,e acphaCam Is on)
Make sum power is on
Complete to set up the system
7. Now the device Is being added. Afte, scccessfcl adding,the device
w;II make two indicating sounds and the geen lht wm be consntly
ON.
…··-
“”‘”
,·:3
6. Make sure the Red indicator on the device is b|inking,then press “Next Step. (If the oplatlon falled,press the reset button for over 5 secoods)
;- ·
0
0
·J
5/TMHOEUCNATMIENRGA
Toeml`a can be Mounted both lnJ·l.andoutJ
Mount to any flat surface Mount onto the wall
I. Please adjost the angle of the ball head bends befo,e yoo moont Ml holes
with a 15/64 lnch(5.95mm) d·III bit then lnse the ancho,s Into the holes;
ancho,s a,e neceSSaOJ foalls that a,e made M of hard materia|s such as
concrete,brIck or stucco.
;- /1
2. Firmly secure the base onto the wall using 3~5 scmws(depends on actoal
wall mount) supplied In the package. Then tighten the cameca to the moonUng
bcacket and let metal head mly sccew the cameca.
; I IIC-C-‘–:-c-
3. It Is ‘”ggested to Install acphacam 7 1-0 ft (2-3 m) above the gm””d This height ma,lmlzes the deteloo caoge of the motloo seosoc of acpha,m. Avoid placlng acphacam undec dice sunlight.
Cofameewra fleld
DzMoeontte;eocnt;on
;_
—– Up to 24ft[7.5m)
l
6 / Charge arphacam
/
usLB ch} IN INcLuDEl f
LED Indication Charging trme
Charging:Steady whiteON Fully charged:OFF 3.5 hours from 0% to 100%
7 / Disclaimer
The contents In this manual,product specifications,sl,e,and shape ace subject
to chaoge without pcloc notice. The manufactuc makes no representions o,
waccanties conceming the contents hereof and cesecves the eight to cevlse this
manual without obligation to ootlfy any pesoc, The maoufactuce shall not be
liable foe any technical o, edlto,lal eccooc omlssloos contained In this
maoual,o, foe any damage,direct o, indicect,fom disccepancies between the
manual and the product It descclbes. The manufacture, assumes no
cesponslblllty, diecy or indirect1y, for financia| |osses or claims fmm third
persons cesultiag from the use of this pcoduct and a,y of its functions, The
total accessIble capacity vales depending on the operating environ menLAll
refences to speed ace foe compacison purposes oaly, Actual data throughput may
va,y.
8/ Customer Service
Waccactly, 12 months limited waccantly Email us, soppoct@acpha.com
website:wwwarpha.com
9/ FCC Warning
This equipment complies with FCC cadiation exposu”‘limits set forth foe an uncontcolled environment. This equipment should be Installed and opecated with minimum disnee 20cm between the cadlato, & youc bocy.
This device complies with pa15 of the FCC Roles.Operation is sobject to the fo||owing two conditions:1)This device may not cause harmfu| inteerence,and (2) this device must accept any inteerence received, including ;nteemnce that may cause undesired operation Any Changes o modifications not expressIy appoved by the pacty responsib|e for comp|iance couId void the use’s authority to operate the equipment. Note, This eqolpmeot has bee, tested aod fo”‘d to comply with the llmlts for a Class B dlgltal device,purs”8ot to part 15 or the FCC Rules. These Iimi3 a deSlgoed to provide reasooable protectloo agalost harmfuI Interfence In a resldentIaI instaIIatIon.ThIs equlpment geoerates uses aM ca, radiate radio frequeocy eoergy aod,If oot installed and used In accoance wIth the instructions,may cause harmfu| interference to radio communications. However,there is no guarantee that inteerence wiII not occur in a paicu|ar Inallatlon. lf this equipment does cause harmful inteference to radio or telev;sion ,eceptlon,which can be dete,mlned by tomIng the equipment off and on, the user is encoumged to t”to correct the Inte”erence by one or more o1 the following mea'”cesc -Reorient o m|ocate the receiving antenna. -lncrease the separation between the equipment and receIver -Connect the equlpment Into an out|et on a cIrcu|t dIfferent from that to Which theWer ls connected. -ConsuIt the deaIer or an experienced radiolTV technician for heIp.
QUICK START GUIDE
Home camera kit:
EC-21BS-04
/,-
,’=
/ ,,
l l
,I /
r j
–
-`
,
0
0
(‘3 l;
}
/
‘
,/,
4’ ,I
😕
,
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>