Numark M4 Professional 3-Channel Scratch Mixer User Guide
- June 6, 2024
- Numark
Table of Contents
M4
PROFESSIONAL 3-CHANNEL
SCRATCH MIXER
QUICKSTART GUIDE
INTRODUCTION
Welcome to the M4 professional 3-channel mixer. Here are some of the features that you’ll love about the M4:
- 2 phono inputs (with phono defeat switch) and 4 line inputs
- Microphone input with 2-band EQ
- Smooth digital crossfader with reverse switch and continuous rotary slope control
- Look-ahead peak-limiting on headphone and master outputs
- 3-band EQ with a rotary kill and gain knobs on each channel
We hope that the M4 serves you well for many years to come.
Sincerely,
The People of Numark
BOX CONTENTS
- M4
- AC Power Adapter
- Quickstart Guide
- Safety & Warranty Information Booklet
REGISTRATION
Please go to http://www.numark.com to register your M4. Registering your product ensures that we can keep you up-to-date with any last-minute product developments and provide you with world-class technical support, should you run into any problems.
GROUND RULES
-
Make sure all items listed in the BOX CONTENTS section are included in the box.
-
READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
-
Study the connection diagram in this guide.
-
Place mixer in an appropriate position for operation.
-
Make sure all devices are turned off and all faders and gain knobs are set to “zero”
-
Connect all stereo input sources as indicated in the diagram.
-
Connect the stereo outputs to a power amplifier(s), tape decks, and/or other audio sources.
-
Plug all devices into power.
-
Switch everything on in the following order.
• Audio input sources (i.e., turntables, CD players, etc.)
• Mixer
• Last, any amplifiers or output devices -
When turning off, always reverse this operation by,
• Turning off amplifiers
• Mixer
• Last, any input devices
CONNECTION DIAGRAM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>