arpha X3 Plus Smart Sonic Musical Electric Toothbrush Instruction Manual

Arpha X3-PLUS Smart Sonic Musical
Electric Toothbrush (Bluetooth Ver)

arpha.com

Thank you for purchasing this X3 Plus Kids’ electric toothbrush.
Before using this product, please read this instruction manual carefully and keep It In a proper place for future reference.

Product Features

• 7 songs loaded Into the toothbrush to help children enjoy brushing their teeth.

• Interactive APP teaches how to brush teeth and stimulates children’s Interest In brushing teeth.
  Upon successful brushing, children are rewarded with unlocking new songs.

• Provides the most appropriate brushing vibration intensity for different age groups of children.

• App built-in brushing instruction video, help children to develop good brushing habits, and in the APP brushing record can be easily checked.

• The handle Is equipped with a yellow light source, which can provide safe yellow light wavelength to relieve baby‘s sensitive gum discomfort, improve oral immunity, and prevent tooth decay.

• FDA-approved food grade silicone and medical grade nano antimicrobial agent are added to keep the brush head antibacterial and clean.

Package Contents

Cautions

Warming

• This product is not suitable for infants and toddlers under 8 months of age, please place it out of the reach of infants and toddlers.
• Infants and toddlers need to have parental or adult supervision and assistance when using.
• Please use the product under the guidance of a professional dentist after oral surgery.
• If you have a pacemaker or other device Installed, please consult your doctor or the manufacturer of the implanted device before use.
• This product is only for oral cleaning, please do not use it for other purposes.
• This product should not be used as a toy.
• If you feel uncomfortable after using it, please stop using it immediately and consult a professional dentist.
• This product should not be disinfected with strong acidic and alkaline detergents or disinfectants.

Prohibitions

• Do not use toothbrush heads that are not made by the original manufacturer.
• Do not place this product near a source of high heat.
• Do not drop or strongly bump the product.
• Do not use water higher than 60°C to clean the toothbrush.
• Do not use the dishwasher or other mechanical equipment to clean the brush head and the base.
• Do not immerse the product or the base of the charger in water or other liquids.
• Do not use the product while running or walking to avoid accidents.
• Do not place or store the charger base in a place where it may fall into the bathtub, sink or toilet.

Reminders

• Please check the product for obvious damage before each use. If there Is any damage or If the base or charging base has been severely dropped, please do not use it.
• Do not squeeze the brush head too hard on your teeth during brushing to avoid damaging your gums.
• To avold damage to gums due to over-abrasion of the toothbrush bristles, It Is recommended to replace the toothbrush head once every month.
• For your baby’s health and hygiene, please do not share the brush head with family members or others.
• Before connecting to the power supply, please check If the local power voltage matches the voltage shown on the product.
• If not in use for a long time, please clean the toothbrush head and toothbrush base thoroughly, store in a cool and dry place, and unplug the cordless charging station to avoid fire or other hazards.

Description of product accessories

Smart Sonic Musical Electric
Toothbrush (Bluetooth Ver) Version| Wireless Charging Base
---|---

Installation and removal of brush head

Removing the Brush Head

Installing the Brush Head
Insert the groove on toothbrush head into the bump and align the brush head according to 1, and then turn it tightly according to 2.

Charging Method

1. Open the waterproof protection cover on the back of the wireless charging base, insert the TYPE-C charging cable Into the wireless charging base Jack, and connect the other end to the power charger and plug it into a household power outlet (please use a power charger that meets the specifications), after the connection Is completed, the LED light of the charging base will be on constantly.
2. Place the toothbrush base on the wireless charger base for charging, the LED light of the tooth- brush base rotates clockwise and continues to turn on, indicating that the toothbrush is being charged. Charging will be completed In about 8 hours (charging time may vary depending on the charge level). After charging is complete, all LED lights on the toothbrush will be turned off after 1 minute to save energy.
3. When the toothbrush is fully charged and placed on the charging stand, the LED lights will light up once In order, and then light up constantly, which means the power Is fully charged.
4. To ensure your safety and save energy, please unplug the wireless charging base after charging is completed.
5. If you have not used this product for a long time, the charging indicator light may not show when the electric toothbrush Is charging, please walt for 3-5 minutes to resume normal charging.
6. It is recommended that the environmental temperature is within the range of 5°C to 35% for charging. If the temperature Is too high or too low, the battery may not be charged properly.

Directions for use of food grade silicone barrier

Used as a barrier when children are first learning to brush

The function of the barrier: To prevent the toothbrush from going too deep Into the mouth and causing dryness and other accidents in young children who are learning to brush their teeth.
The function of the barrier: To promote the development of brain perception and oral muscle development through tactile stimulation.

How to use

A. Connecting arpha Kids APP

1. This product supports arpha Kids APP binding. You can scan the QR code of the outer box or search “arpha Kids” APP in the app store of your cell phone, download, and install it.
2. In arpha Kids APP, register and log In to your account, and follow the instructions on the screen guide. When the screen of arpha Kids APP is opened, short press the button of toothbrush base, and the bonding will be shown on the screen, which means the bonding is completed.
3. Please make sure the Bluetooth of your cell phone is on, and keep the toothbrush close to your cell phone during the connection process.

B. Brushing with a toothbrush alone

1. Wet the bristles of the toothbrush head and squeeze on an appropriate amount of toothpaste.

2. After short press the toothbrush base operation key, the base will sound the “Hello” beep and the punching LED will light up in the clock direction, and then light up constantly according to the position of the current punching data, and the toothbrush base will enter standby mode.

3. Put the bristles on the outer side of the child’s teeth and press the operation key again in the standby mode, the toothbrush will beep “Get Ready” and play the brushing music to start the brushing process.

4. Short press the operation key to pause/restart the brushing process; If you need to terminate the brushing process, please press and hold the operation key for more than 1 second, the toothbrush will stop operation and emit the “See You” beep.

5. According to The Bass Method, the mouth is divided into 4 areas (as shown in the figure below), and the toothbrush Is moved horlzontally from the outside to the Inside with a slight up and down motion. Every $0 seconds there will be a pause of 0.5 seconds, indicating the completion of one area, then you can switch to the next area to brush your teeth, and continue to complete 4 areas of brushing action (this is the complete brushing process), the toothbrush base will automatically stop working, and emit “super super” beep, punch the LED light will continue to light for 1 minute. Then the “See you” beep will be emitted and the base will automatically enter the shutdown state.

6. After brushing, rinse the toothbrush head and shake off any excess water on the head and the base.
   Keep the brush head and the base clean and dry, and store in a cool, dry place.

C. Brush with the use of APP

1. Short press the toothbrush bose operation button to enter the standby mode; at the same time, open the arpha Kids APP, login to your account and select the user to enter the main screen.
2. After the main screen shows that the toothbrush Is successfully connected, press the toothbrush button or “Start Brushing” on the main screen of APP to enter the brushing mode.
3. During the brushing process, you can pause and stop the brushing process by using the toothbrush base or operation screen of the APP.
4. The brushing mode Is the same as using the Toothbrush base alone.

Toothbrush base operation key process

1. Boot up

2. Shutdown

3. Pause/resume vibration

Introduction to the main screen of APP

Punching function

1. During the brushing process, the punching LED will be flashing in the current punching position.
   After brushing process is completed once, the corresponding punching LED will always be on, which means the punching is successful.

2. In the process of brushing teeth due to operation error or other needs, please press and hold the operation button for 1 second to stop the toothbrush operation and cancel the current clocking process, if you want to complete the clocking process, you need to restart the toothbrush and complete the brushing process once again.

Rewards Function

the song bar by yourself.
b. Click on the song bar, then a single window will pop up for selection and audition.|
4| You can change songs in different song bar according to your needs.|
Note After all 7 songs are unlocked, the song bar con replace the song by yourself.

Light spectrum – About yellow light

Light exposure has many benefits for the human body; Yellow light (wavelength: 585-595nm) con directly cause a series of bio-stimulation reactions on human cells, thus producing a cellular self-repair effect and relieving allergic inflammation and other reactions.

Cleaning Suggestions

• Place the brush head under water and move it back and forth to rinse the bristles.
• Place the toothbrush head under water for cleaning.
• After cleaning, gently shake the toothbrush head to remove excess water and dry the toothbrush base with a soft cloth.

Maintenance

• Use a clean soft cloth to wipe off the dirt on the outer casing of the product.
• Do not use volatile cleaning agents or solvents such os alcohol to wipe the dirt.
• Try to place the product in a ventilated place and avoid sunlight exposure for too long.
• When not in use for a long time, the cordless charger plug should be unplugged, and the tooth- brush head and toothbrush base should be  horoughly cleaned and stored in a cool, dry place.
• It is recommended that the toothbrush head be replaced regularly on a 1 month cycle to maintain the best dental cleaning effect.

Product Specifications

• Rated voltage: 3.7V
• Rated power: 0.5W
• Battery Capacity: 350 mAh(*)
• Charging Time: 8 Hours
• Operating Time: 4 minutes a day, 30 days continuous use(*)
  The capacity of the battery allows a reasonable range of +50 mAh difference.
  **Calculated based on 2 minutes/time and 2 times/day of operation.

Common problems and troubleshooting

• When the power Is too low, all the punching LEDs on the toothbrush base will blink for 5 seconds and then shut down automatically.
• When the toothbrush Is in the ready state with the light on, and there is no operation for more than 2 minutes, the toothbrush will automatically enter the shutdown mode.
• The toothbrush can not be used in the charging state.

Gently place the brush head on the teeth
Brush head is not Installed In| Install the brush head correctly
Low battery power| Charge
The operating time of the toothbrush is short| Charging failed| Make sure the base and the charging base are in place and the charging Indicator light Is on
Battery is low| Charge
Battery life is over| Please contact the after-sales service provider
The toothbrush con not operate| Battery is low| Charge
Battery life is over| Please contact the after-sales service provider

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful nterference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>