MobyData M52 Luna Enterprise Digital Assistant Mobile Phone User Guide
- June 6, 2024
- MobyData
Table of Contents
Enterprise Digital Assistant
Quick Start Guide
Mobile Computer Quick Start Guide
Open the box
Verify that your product box contains the following items
- Mobile computer terminal (terminal)
- USB charging/communication cable
- Power adapter with regional plug adapter
- Quick Start Guide
If you order terminal accessories, please check whether they are included in the order. Be sure to keep the original packaging for use when the terminal needs to be repaired.
The device is restricted to indoor use when operated in the European Community using frequency in 5150MHz-5350MHz to reduce the potential for interference.Restrictions or Requirements in BE, BG ,CZ,DK,DE ,EE,IE,EL ,ES,FR,HR,IT,CY,LV,LT,LU,HU,MT,NL,AT,PL,PT,RO,SI,SK,FI,SE,TR,NO,CH,IS,LI.
Getting to Know
Installing communication card
- Turn off the terminal.
- Remove the SIM card cover as shown in the removal of the SIM card cover to remove the SIM card.
EU Declaration of Conformity for Radio Equipment Directive 2014/53/EU Services
We, Suzhou MobyData Smart System Co., Ltd.
2014/53/
hereby, declare that the essential requirements set out in the Radio Equipment
Directive 2014/53/EU Serviceshave been fully fulfilled on our product with
indication below:
Product Name:Mobile Computer
：M52 Luna
Model:M52 Luna
:MobyData
Brand Name: MobyData
The following standards have been applied for the investigation of compliance:
EN 62368-1:2020+A11:2020
EN 50360:2017
EN 50566-2017
EN 62479: 2010
EN 62209-1:2016
EN 62209-2:2010
IEC 62209- 1:2016
IEC 62209-2:2010
EN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
EN 301 489-17 V3.2.4
Draft EN 301 489-52 V1.1.2
EN 301 489-19 V2.1.1
EN 301 511 V12.5.1
EN 301 908-1 V13.1.1
EN 301 908-2 V13.1.2
EN 301 908-13 V13.1.2
EN 300 328 V2.2.2
EN 303 413 V1.1.1
EN 301 893 V2.1.1
EN 300 330 V2.1.1
EN 300 440 V2.2.1 (2018-07)
TIMCO Engineering, Inc，177 E1177-210299
The Notified Body TIMCO Engineering, Inc, with Notified Body number 1177
performed:E1177-210299
The Notified Body TIMCO Engineering, Inc, with Notified Body number 1177
performed:E1177-210299
Detail contact information for this declaration has been listed below as the
window of any issues relevant for this declaration.
| European Representative | Company Information |
|---|---|
| （Company）： | Suzhou MobyData Smart System Co., Ltd. |
| （Address）： | 3f, building E, Yida science Park, No. 11, Jinpu |
Road, SIP,Suzhou,Jiangsu Province, China.
（Name/Title）：|
（Tel. No）：| +86 0512 68234699
（Date）：
（Signature）：| 02/19/2021
This radio equipment operates with the following frequency bands and maximum radio- frequency power transmitted
| Radio Technology | Frequency Band | Maximum power |
|---|---|---|
| GSM900 | 880-915 MHz | 32.97dBm |
| DCS1800 | 1710-1785 MHz | 30.72dBm |
| WCDMA B1 | 1920-1980 MHz | 23.59dBm |
| WCDMA B8 | 880-915 MHz | 23.76dBm |
| LTE FDD B1 | 1920-1980 MHz | 22.71dBm |
| LTE FDD B3 | 1710-1785 MHz | 22.41dBm |
| LTE FDD B7 | 2500-2570 MHz | 24.25dBm |
| LTE FDD B8 | 880-915 MHz | 22.87dBm |
| LTE FDD B20 | 832-862 MHz | 22.48dBm |
| LTE TDD B38 | 2570-2620 MHz | 23.46dBm |
| LTE TDD B40 | 2300-2400 MHz | 33.34dBm |
| Bluetooth | 2400-2483.5 MHz | 8.95dBm(EIRP) |
| WLAN | 2400-2483.5 MHz | 19.33dBm(EIRP) |
| WLAN | 5150-5350 MHz | 15.43dBm(EIRP) |
| WLAN | 5745-5825 MHz | 11.79dBm(EIRP) |
| NFC | 13.56 MHz | 16.748dBμA/m at 3m |
Charging Terminal
The battery attached to the terminal has a high discharge power.Use the
supplied tower adapter to charge for at least 3 hours.
Note: using the terminal while the battery is charging significantly
increases the time required to fully charge. user to lose the right of after-
sales warranty.
Warning: only use standard charger, model ES568-U050200XYC（only for EU
version)
Using the charger not provided may damage the product, and may cause the
Warning: make sure all components are dry before connecting the terminal to
the peripheral. Wet components may cause damage that is not covered by
warranty.
CE (SAR)
EN62209-2,
0.688SAR:1.586
CE RF Exposure Information(SAR)
For body-warn operation, this device has been tested and meets the ICNIRP
guidelines and the European Standard EN62209-2, for use with dedicated
accessories. Head SAR value:0.688 W/kg, Body SAR value:1.586 W/kg.
Turning Power On/Off
To turn on the terminal, press the power button for approximately 3 seconds.
To turning the terminal off:
-
Reboot Options
Press and hold the power button for approximately 3 seconds until the reboot options menu is displayed. -
Power off Touch Power off.
Forcing restart
When the terminal fails to work, crashes, etc., it can be forced to start by pressing the power button for about 10 seconds.
Using the Scan/Image Engine Demo
1scanner
Touch scanner on desktop
2 Point the terminal at the bar code
Note: for best performance, scanning at a minimum angle is recommended to
avoid reflections.
3 Scan And press and hold scan or the scan key. Focus the aiming beam on the
barcode.
Note : the left and right buttons can also trigger the scan imager.
4、The decoding result is displayed on the touch screen.
Aiming Beam
When the terminal is close to the barcode, the aiming beam will be narrowed;
when the terminal is far away from the barcode, the aiming beam will be
widened.
The aiming beam must be close to the code system (MIL size) with smaller bar
codes and elements. Aiming beam must have larger bar code and element code
size (MIL size).
Aiming at the beam diagram
Linear Bar Code
2D Matrix Symbol
| |
---|---|---
FCC COMPLIANCE
Note:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Notice:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Note: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC RF exposure warning
The equipment complies with FCC RF exposure limits set forth for an
uncontrolled environment. The equipment must not be co-located or operating in
conjunction with
any other antenna or transmitter.This device was tested for typical body-worn
operations with the back of the device kept 15mm from the body. To maintain
compliance with RF exposure requirements, use accessories that maintain an
15mm separation distance between the user’s body and the back of the device.
The use of belt clips, holsters and
similar accessories should not contain metallic components in its assembly.
The use of accessories that do not satisfy these requirements may not comply
with RF exposure requirements, and should be avoided. Head SAR value:0.63
W/kg, Body SAR value:0.60 W/kg.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>