arpha SE80 Video Smart Lock User Manual

arpha SE80 Video Smart Lock

Product Information

Specifications:

• Model: Video Smart Lock
• Compliance: FCC Part 15
• Conditions: Must not cause harmful interference, Must accept any received interference

Product Usage Instructions

Installation:

1. Choose a suitable location on your door to install the Video Smart Lock.
2. Follow the provided installation manual to securely mount the lock on your door.
3. Ensure the lock is aligned properly and test its functionality before use.

Setup:

1. Download the accompanying mobile application for the Video Smart Lock from the App Store or Google Play Store.
2. Follow the in-app instructions to connect the lock to your smartphone via Bluetooth or Wi-Fi.
3. Create a secure password or PIN for accessing the lock remotely.

Operation:

1. To lock or unlock the door, use the mobile app or enter your PIN directly on the lock keypad.
2. You can also grant temporary access to guests or family members through the app.
3. Monitor lock activity and receive notifications on your smartphone for added security.

FAQ

• Q: What should I do if the Video Smart Lock is not responding?
  • A : Check the battery levels of the lock and replace them if necessary. Ensure the lock is within range of the connected device.
• Q: Can I install the Video Smart Lock on any type of door?
  • A : The lock is designed to fit standard doors, but it’s recommended to check compatibility before installation.
• Q: How can I reset the lock’s settings?
  • A: Refer to the user manual for instructions on resetting the lock to its factory settings.

OVERVIEW

Model : AL501

1. Fingerprint Scanner : Use to unlock the door.
2. Status Light :
   • Green: Succeed (Door unlocked)
   • Red : Abnormal status detected
3. Ambient Light Sensor : Detects the amount of light.
4. High-Definition Camera
5. Touch Keypad
6. Lock Button : Press this button to lock the door.
7. Unlock Button : After input the right password, press this button to unlock the door.
8. Microphone
9. Motion Sensor
10. Doorbell Button : Press can make a doorbell call.
11. Lock Cylinder : Press can make a doorbell call.
12. Doorbell Light : The ring light automatically turns on when someone approaches the door.
13. Emergency Power Supply Port: When the battery is depleted, the door lock can be powered through this interface using a portable power bank.
    • Note : The “Emergency Power Supply Port” is not for battery charging purposes and can only be used for emergency power supply to the lock.

Arpha Security Video Smart Lock

Model : AL501

1. Rechargeable Lithium Battery
2. Charging Port
3. Setting Button
4. Lock & Unlock Button
5. Manual Lock/Unlock Knob

How To Open / Close Lock Cylinder Cover

Guide of how to remove the doorbell button.

Remove:

Put it back:

• Align the doorbell button module with its original position and gently place it back in a vertical position.
• Press lightly with your thumb atthe arrow location to push the upper end of the doorbell button module in.
• Press the doorbell button to confirm if it has been installed properly.

*Doorbell Chime
**

Model: AL501

Compatible Doors

1. Following the installation instructions to install the smart lock.
2. Download the Alpha Plus App
3. Register and login Alpha Plus App
4. Calibrate the smart lock and Complete Bluetooth & Wi-Fi settings in the App

Dinstalling Video Smart Lock

Parts List

Installation Overview

Step 1. Install Deadbolt

1.  Check your door to see if the deadbolt requires adjustment.
   If the backset is 70mm, turn the faceplate 180 ° to extend the length.

2. Insert and screw the deadbolt into the doorframe.

Step 2. Install Strike Plate

Step 3. Install Exterior Assembly

Step 4. Install Interior Assembly

1. Detach the back cover from the interior assembly.
2. Run the wires through the back cover.
3. Secure the back cover with screws.
4. Tightly fasten the screws in place. Set the screws with your hands, then use a screwdriver to secure them.
5. Wire to the interior assembly.
6. Mount the interior assembly. Make sure both wires are tucked into the cabin on the back of the interior assembly.
7. Check if the deadbolt retracts by turning the thumbturn.
8. Fully charge the battery before first use. It might take about 6 hours.

• Apart from being able to configure your door lock through the app, you can also directly set the relevant settings on the door lock following the instructions below.
• NOTE : “The following steps are not necessary; you can also set up your lock directly in the arpha plus APp.”

Restore Factory Settings

• Stepl: Press and hold “setting” button, and after 4 seconds, the lock will start emitting a “beep” sound ( 7 times ) .
• Step2: Hold the button until you hear the voice prompt: To confirm. Please press the unlock button.
• Step3: Press the unlock button within 4seconds, you will hear the voice prompt: Factory reset succeeded.

Set Administrator Password

• Stepl: Press the setting button. If no adminis- trator password has been set before, you will hear a voice prompt: Please set the administra- tor password
• Step2: After input the administrator password press the lock button to confirm.
• Step3 : Follow the voice prompt instructions, enter the administrator password again, and press the lock button to confirm.

Enter The Function Settings Mode

Stepl: Press the “Settings” button. You will hear a voice prompt saying, “Please verify administrator user.” Enter the correct adminis- trator password, then press the “Lock” button to confirm. If the password verification is successful. you will enter the setting mode.

Setting Mode Function List

Vocation Mode

When you need to go on vacation for an extended period, you can set the door lock to vacation mode. In this mode, the door lock will disable some functions and reduce response speed to minimize power consumption and prevent the battery from draining during long periods of inactivity. Exiting Vacation Mode:

While in vacation mode, the touch keypad will no longer be activated by touch. To exit vacation mode and activate the touch keypad, you need to press and hold the “Lock” button for 5 seconds.

Enter Path: Setting Mode → Press [4) → Press [4)

Automatic Detection Of Unlocking Direction

When you find that the actions of the lock button and unlock button are opposite to the actual door lock operation (meaning that pressing the lock button performs the unlock action). this is usually due to the door lock incorrectly determining the direction of opening. You can use this function to re-detect the opening direction and restore normal operation to the door lock.

Enter Path : setting Mode → Press (4) → Press [6)

Permanent Unlock Mode

Once the Permanent unlock mode is activated, the door lock will no longer automatically lock until it is manually locked or the lock button is pressed to lock it.

Note : When manually locking or pressing the lock button to lock, the system will automatically exit the constant unlock mode.

Enter Path: setting Mode – Press [4] → Press [7]

APP User Guide : Connect The Lock To Internet

Video Guide

Scan the QR code to watch the video instructions on how to perform the operation.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>