AMP Lighting ASDL-2016-B-BZ Solar Landscape Lighting Installation Guide
- June 6, 2024
- AMP Lighting
Table of Contents
- Important Safety Instructions: Read Before Installation
- Important Safety Instructions
- Package Contents
- Product Dimensions
- Test Solar Light
- Install Fixture Body
- Install Color Strip
- How to Replace Battery
- INSTALLATION & MAINTENANCE GUIDE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
INSTALLATION & MAINTENANCE GUIDE
AMP® Solar Landscape Lighting
AMP® Solarium Brass Solar LED Dock Light
ASDL-2016-B-BZ
Help Hotline: 1-813-978-3900 · Mon-
Fri 9am-6pm (EST)
Important Safety Instructions: Read Before Installation
This luminaire is intended for installation in accordance with local codes and
the National Electric Code (NEC). Failure to adhere to these codes and
instructions may result in serious injury, property damage and void the
warranty.
These instructions do not intend to cover all variations in installation,
operation maintenance, or mounting situations.
Please note these solar fixtures are equipped with built-in photocells and
they will not turn on until it is dark enough. These fixtures will also
require plenty of sunlight to function properly. It’s best to have the fixture
in an area where the sun can reach it throughout the day and where no ambient
light will affect the photocell at night. If your fixture is not functioning
at night, confirm that the fixture is turned on. See step one for details.
Important Safety Instructions
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
The lighted lamp is HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
- The lamp gets HOT quickly!
- Do not touch the hot lens, guard, or enclosure.
- Keep the lamp away from materials that may burn.
- Do not touch the lamp at any time. Use a soft cloth. Oil from the skin may damage the lamp.
- Do not operate the luminaire fitting with a missing or damaged shield.
SAVE THESE INSTRUCTIONS
Package Contents
A. (1) Fixture Body
B. (6) Colored Stripes (2 Amber, 2 Blue, and 2 Red)
C. (4) Screws
D. (4) Wall Anchors
Product Dimensions
Test Solar Light
To confirm the solar dock light is on, press the ON/OFF switch located on the
back of the luminaire. Then, place the solar light on a flat surface and cover
the solar panel completely using a piece of dark material. The dock light will
light up when the solar panel is covered and turn off when it is uncovered.
Proceed to the next step after the fixture is turned on.
Install Fixture Body
- Place the mixture onto the desired location and mark four points on the surface for the wall anchors.
- Remove the fixture body. Using the marks on the wall as a guide, drill the proper holes required to mount the fixture.
- Push the wall anchors into the drilled holes.
- Attach the fixture onto the wall anchors using the screws. Tighten the screws with a screwdriver.
Install Color Strip
Note: You can pick a color strip of your choice if you perfer to have a colored light output.
- Remove the film on the end of the color strip.
- Pass the color strip through the ribs around the luminaire.
- Position the ends of the color strip behind one of the ribs to secure it in place.
How to Replace Battery
- Using a screwdriver, remove the screws from the cover on the back of the fixture.
- Remove the cover.
- Remove the battery out of the battery compartment and replace it with a new one.
- Attach the cover back onto the fixture and secure it with previously removed screws.
INSTALLATION & MAINTENANCE GUIDE
AMP® Solarium Brass Solar LED Dock Light ASDL-2016-B-BZ
customersupport@amplighting.com
813.978.3900
Help Hotline :
1-813-978-3900
Mon-Fri 9am-6pm (EST)
Specifications and product details are subject to change without notice.
© Copyright 2021, AMP® Lighting, Lutz FL USA 33549
All rights reserved.
customersupport@amplighting.com
813.978.3900
www.amplighting.com
IS-ASDL-2016-B-BZ-ver1.pdf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>