AMP Lighting ASPL-3029-B-BZ Low Voltage Landscape Lighting Installation Guide
- June 6, 2024
- AMP Lighting
Table of Contents
INSTALLATION & MAINTENANCE GUIDE
AMP ® Low Voltage Landscape Lighting
AMP ® Solarium Solar LED Post-Top Light
ASPL-3029-B-BZ & ASPL-3029-P-BK
Help Hotline:
1-813-978-3900 • Mon-Fri 9am-6pm (EST)
www.amplighting.com
Important Safety Instructions: Read Before Installation
This luminaire is intended for installation in accordance with local codes and
the National Electric Code (NEC). Failure to adhere to these codes and
instructions may result in serious injury, property damage and void the
warranty.
These instructions do not intend to cover all variations in installation,
operation maintenance, or mounting situations.
Please note that these solar fixtures are equipped with built-in photocells,
so they will not turn on until it is dark enough. These fixtures will also
require plenty of sunlight to function properly. It’s best to have the fixture
in an area where the sun will get to it at all times throughout the day and
where no ambient lighting will affect the photocell at night. If your fixture
is not functioning at night, be sure that the on/off button has been engaged.
See step one for details.
Important Safety Instructions
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS Lighted
lamp is HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
- The lamp gets HOT quickly!
- Do not touch the hot lens, guard or enclosure.
- Keep the lamp away from materials that may burn.
- Do not touch the lamp at any time. Use a soft cloth. Oil from the skin may damage the lamp.
- Do not operate the luminaire fitting with a missing or damaged shield.
SAVE THESE INSTRUCTIONS
Package Contents
A. (1) Fixture Body
B. (4) Self-tapping Screws
Product Dimensions
Test Solar Light
Slide the ON/OFF switch of the fixture to the “ON” position.
Cover solar panels completely by using a dark material. The fixture will light
up when the solar panel is covered and turn off when it is uncovered. Now you
can proceed to the next steps of installation knowing the fixture is ON.
Install Fixture to Post
Attach the fixture onto a 4”x 4” square wood post and secure it with self- tapping screws. Tighten with a screwdriver.
How to Replace Battery
Remove Solar Panel
Using a screwdriver, remove the screws from the corners to remove the solar panel from the fixture body.
Replace Battery
Disconnect the quick connector by pressing the tabs on the side. Remove the
old battery by removing the two screws. Replace the battery and secure it with
the previously removed screws. Then connect the tabs of the quick connector
back together.
Reinstall the solar panel to the fixture body and secure it with previously
removed screws.
customersupport@amplighting.com •
813.978.3900
Help Hotline:
1-813-978-3900 • Mon-Fri 9am-6pm (EST)
Specifications and product details are subject to change without notice.
© Copyright 2021, AMP
® Lighting, Lutz FL USA 33549 • All rights reserved.
customersupport@amplighting.com •
813.978.3900
www.amplighting.com
IS-ASPL-3029-ver1.pdf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>