ADLER MS 7719 Heater User Manual

: June 6, 2024
: ADLER

Table of Contents

Model identifier MS7719
USING THE DEVICE
CLEANING AND MAINTENANCE
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

MS 7719
user manual – 5

Model identifier MS7719

Item| Symbol| Value| Unit

---|---|---|---
Heat output / Moc
Nominal heat output| P nom| 2| kW
Minimum heat output (indicative)

| P mm| 0,015| kW
Maximum continuous heat output /| Pmax,c| 2| kW
Auxiliary electricity consumption| | |
At nominal heat output| el mox| N/A| kW
At minimum heat output| elm| N/A| kW
In standby mode| el S B| N/A| kW
Contact

Item

|

Unit

---|---
Type of heat input, for electric storage local space heaters only (select one)/
manual heat charge control, with integrated thermostat **| (no)
manual heat charge control with room and /or outdoor temperature feedback **| [no]
electronic heat charge control with room and /or outdoor temperature feedback|
fan assisted heat output **| (no)
Type of heat output/room temperature control (select one) **
single-stage heat output and no room temperature control **| [no)
two or more manual stages, no room temperature control| [no)
with mechanic thermostat room temperature control **| [no)
with electronic room temperature control **| [yes)
electronic room temperature control plus day timer|
electronic room temperature control plus week timer|
Other control options(multiple selections possible) **
room temperature control, with presence detection **| [no)
room temperature control, with open window detection **| [no)
with distance control option **| [no)
with adaptive start control **| [no)
with working time limitation | [no)
with black bulb sensor | [no)
Adler Sp. z o.o. ul. Ordona 2A, 01-237 Warszawa, Polska

This product is suitable only for occasional use or for use in well- insulated rooms.

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

The warranty conditions are different if the device is used for commercial purposes.”

Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
The applicable voltage is 220-240V, ~50/60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
Please be cautious when using around children. Do not let the children play with the product. Do not let children or people who do not know the device use it without supervision.
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
Never put the power cable, the plug, or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions.
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
Never use the product close to combustibles.
Do not let the cord hang over the edge of a counter or touch hot surfaces.
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with residual current rating of not more than 30 mA. Contact a professional electrician in this matter.
Never use this device close to water, e.g.: under the shower, in the bathtub, or above a sink filled with water.
If using the device in the bathroom after use remove the power plug from the socket, because water proximity presents a risk, even if the device is turned off.
Do not put your fingers or any objects through the ventilation grille
Do not place any objects on the convector. The vents must not be covered by a towel, curtain, etc. may cause a malfunction or fire.
Keep the distance between the convector and other items such as furniture, curtains.
Convector is equipped with a device to prevent overheating. Automatically turns off the convector in the event of excessive temperature convector (due to clogged vents, fan malfunction ). In this case, disconnect the unit from the power supply, wait a few minutes, and remove the cause of overheating,
Do not touch the hot parts of the convector. Do not touch the appliance with wet hands.
In the case of a wet convector or falling of any object through the ventilation grille of the convector, turn it off immediately and disconnect from the network. Before re-using with convector call for service .
Do not place the convector directly below the electrical outlet.
Always turn off the convector button before disconnecting it from the mains.
Do not use this heater in the immediate vicinity of a bathtub, shower, or swimming pool
Do not use this heater if it has been dropped
Do not use if there are visible signs of damage to the heater
Use the heater on a level and stable surface or attach it to the wall, if provided for by the manufacturer

WARNING: Do not use this heater in small rooms where there are people who are unable to leave them by themselves unless constant supervision is ensured.
WARNING: To reduce the risk of fire, keep textiles, curtains, or other flammable materials at least 1 m away from the heater air outlet.

DESCRIPTION OF THE DEVICE

Thermostat dial
Power switch/heating power selector
(a) – cold airflow
(b) – 1000W
(c) – 2000W

USING THE DEVICE

The fan heater has two levels of heating power.
Position 0 – the device is switched off
Position – unheated airflow
The position I – 1000 W warm airflow
Position II – 2000 W hot airflow
On both heating levels, the temperature can be adjusted using a thermostat dial (1).
The device is protected against overheating by the means of a thermal switch, which can power it off for a while. If this happens, unplug the device and wait a couple of minutes. After a while, you can continue to use the device.

CLEANING AND MAINTENANCE

Make sure the fan heater is not hot.
Before cleaning the device remove the plug from the electrical socket.
Keep the air inlet and outlet openings clean. Do not allow dust to collect on the openings.
Clean the housing using only dry or moist cloth.
Do not immerse the device in the water!
TECHNICAL DATA
Voltage: 220-240V ~50Hz
Power: 1700-2000W
To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins. The used appliances should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose of this appliance in the common waste bin.

www.meskoeurope.eu
2022-01-03