Kruger Matz KM0469 SmartKid Kids Smartwatch Owner’s Manual
- June 6, 2024
- Kruger Matz
Table of Contents
Kruger Matz KM0469 SmartKid Kids Smartwatch Owner’s Manual
The SIM card must meet the following conditions:
- The card must be active
- The card must be top up on the account (necessary to make calls and for the SOS and sound guardian function)
- The card must have an access to the Internet (localization)
- The card must not have parental locks
- The card must not have an active PIN code
SMARTWATCH
-
Phone book
Phone book contains phone numbers which have been entered into the phone book in the app settings. The smartwatch can make phone calls to those numbers. -
Quick learning
In the game you decide whether the equations such as addition and subtraction are correct. There are three levels to choose from. -
Wechat
Voice chat allows the communication between the smartwatch and the app. The users of both may send short (max. 15 seconds) voice messages to each other. To record a voice message, press and hold [Press]. Release the finger to send a message. -
Flashlight
The smartwatch is equipped with a flashlight. Tap on the display to turn it on. -
Camera
Take a photo by tapping on the camera icon at the bottom of the display. The photo will be saved in the smartwatch [Album] menu.
It is also possible to send the photo to the SmartKid app. To send the photo to the app, select desired photo, then press [Upload]. The photo will be uploaded to the app’s [Remote camera] menu. -
Album
Browse through photos taken with the smartwatch camera. Select desired photo, then press [View]. -
Make friend
Connect two smartwatches. When the two smartwatches are connected, they can communicate with each other. First make sure the app is in the [Make friends] interface, then enter [Make friend] function in each of the smartwatches and bring them close to each other. When the connection has been made successfully, a green tick will appear on the display of both smartwatches. -
Step
The pedometer counts and shows the number of steps taken. To enable the function, go to [Health] in the app main menu and turn on pedometer function. Then enter [Step] in the smartwatch menu. Number of steps taken will be displayed on the smartwatch display. -
App download
QR code is displayed on the smartwatch display. Scan it with the appropriate app and download the SmartKid app from Google Play or App Store.
SMARTKID app
-
Main menu
Access to functions such as remote camera, health, do not disturb, alarm clock, message and rewards. -
User account
Access to account settings, device list, password change and logging out. -
Map selection
Choose map (standard, satellite, bus map). -
Locate app’s user
Show the location of the app’s user on the map (pink tag). -
Select device
Select one of the registered smartwatches. -
Show all registered smartwatches Show the location of all registered smartwatches on the map.
-
Chat
To send a voice message to the smartwatch, press and hold [Start recording]. Voice message may take up to 15 seconds. To send a text message, press the , enter message, then press [Send]. To play the message, press it. To delete the message, press and hold it, then select [Delete]. Sent message is saved in the smartwatch [Wechat] menu. -
Security zone
To set security zone, press the „+” at the bottom of the display, input name for the zone (1-32 characters), for example school, home, then set the security zone with „-” and „+”. Minimal diameter of the security zone is 200 meters. Active zone is blue. To confirm, press [Save]. A notification will be sent to the app, when the smartwatch’s user leaves security zone.
Note: To set security zone it is necessary to have active GPS connection. -
Settings
App settings -
Locate
Two systems are used to locate the smartwatch: GPS and LBS. GPS system is the most precise way of locating that uses satellite connections and ground-based receivers. It is only accessible, when the smartwatch’s user is in the open space. Buildings and closed spaces block GPS signal. Smartwatch location based on the GPS system is marked with a red tag and GPS writing on the map.
When locating based on the GPS system is not possible (smartwatch’s user is in the building), the smartwatch uses LBS system. LBS system uses cell towers to locate. Smartwatch location based on the LBS system is marked with a blue tag and LBS writing on the map. -
History
Display the history of distance covered on a given day.
Main menu
Remote camera
Send a request for a photo to the smartwatch. To do this, press [Photograph].
Photo taken with the smartwatch camera will appear after about 30 seconds in
the [Remote camera] menu.
Health
The smartwatch is equipped with a motion sensor which allows to track child’s
activity- number of steps taken, amount of calories burned, covered distance
as well as to monitor child’s sleep.
To be able to track child’s activity, make sure that pedometer/sleep monitor
function has been enabled. To achieve data on the amount of calories burned
and distance covered, input child’s weight and step length.
Moreover, it is also possible to set the time for the smartwatch to track
child’s activity.
Data synchronize every 10 minutes.
Do not disturb
You can set up maximally 3 periods of time, when the smartwatch will be
completely inactive. Before using the function, please make sure that the time
on the smartwatch and in the app’s user smartphone is the same. Otherwise, the
function will be unavailable.
Alarm clock
You can set up maximally 3 alarm clocks. At the time set and on the scheduled
days, the alarm clock will go off on the smartwatch.
Message
Notifications (for example SOS, low battery, leaving security zone prompts)
sent from the smartwatch.
Rewards
Reward child with virtual rewards (hearts) which appear on the smartwatch main
screen. To send a reward, set heart amount with „+” and „-” and press [OK].
Settings
SOS/FAMILY NUMBER
Enter up to 3 phone numbers to which SMS notifications will be sent if SOS
function is used. The smartwatch will make a phone call to the first entered
phone number, it will send SMS notifications with date and time when the SOS
function was used as well as smartwatch location to all three numbers.
Sound guardian
The smartwatch will make a phone call to the assigned phone number. It will be
a one-way phone call, what means that the app’s user will hear the
surroundings of the smartwatch but without the knowledge of the smartwatch’s
user.
Location Update Schedule
Set the frequency of updating the smartwatch location. Available options are:
normal (every 10 minutes), power saving mode (every 1 hour) and tracking mode
(every 1 minute). Normal mode is recommended. Tracking mode is the most
battery consuming.
SMS Alerts
The smartwatch will send SMS notification to the assigned number if the
following situations occur: low battery level, SOS prompt. Each notification
can be turned on/ off.
Make friends
Connect two smartwatches what allows communication between them. Make sure you
entered [Make friends] function in the app, then go to [Make friend] function
in the smartwatch menu and bring smartwatches close to each other. Successful
connection between the two smartwatches is indicated with a green tick on the
display of both smartwatches.
Phone book
You may enter up to 10 phone numbers that may be dialed from the smartwatch.
Entered phone numbers will appear in the [Phone book] in the smartwatch.
Time zone selection
Set the time zone. Before using the smartwatch, set the time zone (West:GMT
0:00 for Poland) where the user is located. After setting the time zone,
current time should appear on the smartwatch.
Language selection
Set the smartwatch OSD language.
Set Local Base Station
Localization of the smartwatch using cell towers.
Watch Finder
Find the smartwatch. Press [Watch Finder], then confirm by pressing [OK]. The
smartwatch will issue sound signals. To turn it off, press the POWER/SOS
button on the smartwatch.
Remote Shutdown
Switch off the smartwatch remotely. The smartwatch will switch off after about
30 seconds.
Remote restart
Set the smartwatch to the default settings.
Note: make sure the smartwatch is switched on and in the network range.
Sign out
Log out of the app.
LEARN MORE
For more information on this product, go to
www.krugermatz.com.
Visit www.krugermatz.com website for more
products and accessories.
In case of any doubts or questions reach out to our Frequently Asked Questions
section.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature, indicates that It should not be disposed with other household wastes at the end of its working life. To prevent possible harm lo the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.