HUMANTECHNIK A26340 Signolux Receiver Alarm Clock Instruction Manual
- June 6, 2024
- HUMANTECHNIK
Table of Contents
Instruction manual
signolux receiver alarm clock
We would like to congratulate you on purchasing the »signolux receiver alarm clock«. You have chosen a modern and reliable system. Kindly read the instruction manual carefully in order to use the device properly and to familiarise yourself with all the possibilities of the system.
Package contents
Kindly check if all the following parts are included:
- signolux receiver alarm clock«
- 12 volts power supply unit
- Instruction manual
- Warranty card
Should any parts be missing, kindly contact your specialist dealer or the manufacturer directly?
Functioning principle
The »signolux receiver alarm clock« is an electronic clock with a digital time display. It wakes you up with an acoustic signal which is adjustable in pitch and volume. It is also a complete signolux receiver, capable of displaying the signals of all signoluxtransmitters. A received signal is displayed with flash and/or sound and identified by 8 indicator LEDs. The following accessories can be connected to the »AUX« connector of the alarm clock:
| – Vibrating pillow | A-3303-0 |
|---|---|
| – Flash module | A-3320-0 |
| – Acoustic module | A-3340-0 |
Setup
Connect the power supply unit to the 12 V power socket of the alarm clock and
plug it into a 230 V power outlet.
Setting the time
To set the time, press the time set
button » « for one second. The
hour digits will start to flash. Set the
desired hour by turning the adjusting
wheel (on the reverse side of the of
the clock) to the left or right.
Press the time set button » « again.
The minute digits will start to flash.
Turn the adjusting wheel to the left or
right to set the desired minutes.
Pressing the time set button » «
again will end the time setting procedure and the set time is
displayed.