Yale NexTouch Keypad Access Exit Trim Lock Touchscreen and Push Button Instruction Manual
- June 6, 2024
- Yale
Table of Contents
- Before You Begin
- Door Position Switch Option
- Install Cylinder
- Change Hand of Trim (if necessary)
- Install Outside Trim Assembly
- Install Exit Device
- Install Strike and Optional DPS
- Install Inside Mounting Plate
- Attach Cables to Inside Lock
- Install Inside Lock
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
nex Touch™
Keypad Access Exit Trim Lock
Touchscreen and Push Button
Installation and Programming Instructions
WARNING
This product can expose you to lead which is known to the state of California
to cause cancer and birth defects or other reproductiveharm. For more
information go to www.P65warnings.ca.gov.
08/2018
Retrofitting or modifying this product may impact fire rating, safety features and warranty. Consult with code specifications to ensure compliance with all codes and ratings.
Before You Begin
Door Position Switch Option
Install Cylinder
|
---|---
**** If using cylinder other than 1-1/8″, a new collar must be used that is sized appropriately for cylinder length.
Test Cylinder
Test cylinder by turning key counter-clockwise to unlock trim.
If there is any binding then cylinder is not at correct depth and needs to be
threaded further into escutcheon.
Change Hand of Trim (if necessary)
Install Outside Trim Assembly
Install Exit Device
Install Strike and Optional DPS
Install Inside Mounting Plate
Attach Cables to Inside Lock
Install Inside Lock
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>