Xing Da Electronics XO-9728-1 Wireless headphone Instruction Manual

Xing Da Electronics XO-9728-1 Wireless headphone

What’s included:

• 1 x Bluetooth Headphones
• 1 x USB to Micro-USB Charging Cable
• 1 x Instruction Manual

Functions

1. Vol+/Next Track
2. Vol-/Prev Track
3. Micro USB Input
4. 3.5mm Aux Input
5. LED Indicator
6. Microphone
7. Multifunction Button(Play/Pause)
8. ON/OFF Button

Tech Specification

• Playing Time: 3 hours (at max volume)
• Charging Time: 2 hours
• Pairing Name: “Light Up Headphones”
• Battery: 3.7V/400mAh Li Polymer

Instructions:

1. Charging the Earbuds:
   • Connect the provided USB cable to a regulated USB adapter. Connect the Micro-USB end of the cable to the charging port of the headphones.
   • LED indicator will turn RED when charging, once fully charged LED will turn OFF.
2. Bluetooth® Connection:
   • Press and hold ON/OFF Button to turn ON the headphones, headphones will prompt pairing mode.
   • Turn on the Bluetooth function on mobile device, Select “Light Up Headphones” pairing name.
   • LED will turn solid BLUE if successfully paired.
   • Long press ON/OFF button to turn off device.
3. Call Controls:
4. When receiving a phone call, press the multifunction button to answer and press again to end call.
5. Double Press the multifunction button to redial the last number called.
6. Music Controls:
   • Single press Multifuction button to Play/Pause audio.
   • Short press Vol+ to increase volume.
   • Long press Vol+ to skip to the next track.
   • Short press Vol- to decrease volume.
   • Long press Vol- to skip to previous track.
7. Aux Connection:
   • Connect a AUX cable(NOT INCLUDED) to the 3.5mm Aux Input of the headphones and mobile device to play music directly.

SAFETY PRECAUTIONS:

WARNING- When using this product, basic precautions should always be followed:

1. Read all the instructions before use.
2. Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C).
3. The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles.
4. Do not expose the device to moisture.
5. Do not use the device in excess of its output rating. Overload outputs above
6. Do not use the device if damaged or modified
7. damaged or modified batteries may exhibit unpredictable behaviour resulting in fire explosion or risk of injury.
8. Do not disassemble the device. For professional. Incorrect reassembly may result in a risk of jurny
9. use only identical replacement parts to ensure product safety

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any inte rference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>