Xing Da Electronics 7197-05 Wooden Bluetooth Speaker with Wireless Charging Pad Instruction Manual

Xing Da Electronics 7197-05 Wooden Bluetooth Speaker with Wireless

Charging Pad

Functions

1. Wireless Charging Pad
2. Play/Pause/Power Button
3. Vol-/Previous Track
4. Vol +/Next Track
5. Micro-USB charging port
6. Microphone
7. 3.5mm Aux Input

What’s included

1. 1 x Bluetooth® Speaker (7197-05)
2. 1x USB to Micro-USB Charging Cable
3. 1x Instruction Manual

Tech Specifications

1. Playing time: up to 6 hrs at max volume
2. Charging time: up to 3 hrs
3. Pairing Name: “Wooden Speaker

Instructions

• (Be sure to fully charge the speaker before using for the first time).
• Charging the Speaker
  • Connect the provided charging cable to a power source and to the micro USB port on the speaker (5).
    The LED indicator light will glow red when charging and turn off when fully charged.

Wireless Charging

• Speaker will need connected with the provided 2A micro-USB cable and a 2A outlet adapter (not included) to a power source and to the micro USB port on
  the speaker(5).

• Place wireless charging supported mobile device on top of the wireless charging pad.

• Phone will begin to charge automatically.

• indicator will turn RED when charging, once device is fully charged LED will turn Green.

Bluetooth® Setup:

• Press and hold power button to turn ON the speaker, LED Indicator will flash BLUE when in pairing mode.
• Turn on the Bluetooth function on mobile device, Select “Wooden Speaker” pairing name.
• LED will turn solid BLUE if successfully paired
• Speaker will automatically pair if the mobile device has been paired before.

Playing Music:

• Short press “Power Button” key to pause music. A second short press will resume playing music again.
• Long press “Previous track/Vol-“, the speaker will play the previous track.
• Short press to reduce speaker volume.
• Long press “Vol+/Previous Track”, the speaker will play the next track. Short press

Call Function:

• Short press “Power Button” to answer a incoming call, press again to end call. Long press to reject the call.

SAFETY PRECAUTIONS

WARNING: When using this product, basic precautions should always be followed: Read all the instructions before use. Never store or use this product in temperatures below 32°F (0°C) or above 115°F (45°C).

• Do not overcharge your phone. The
  unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time.

• The unit will only achieve full performance after 2 or 3 completed charge and discharge cycles.

• To reduce the risk of injury, close supervision is required when the product is used near children.

• Do not expose the device to moisture. Do not use the device in excess of its output rating. Overload outputs above the

• Do not use the device if damaged or modified.

• Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.

• Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of fire or injury.

• Do not expose the device to fire or excessive temperatures. Exposure to fire or temperatures above 104°F (40°C) may result in explosion.

• To ensure product safety, ensure that qualified service professionals use only identical replacement parts.

• Attachments.on the back of vour nhone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove attachments from the phone before charging on this device.

FCC Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.

This device complies with Part
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   E-Field Strength and H-Field Strength at 15 cm surrounding the EUT and for above the top surface of the EUT，15cm and 20cm all have been tested.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>