Ufree U-1176 Beard Trimmer for Men Instruction Manual
- May 15, 2024
- Ufree
Table of Contents
11 in 1 SUPER
WASHABLE GROOMING KIT
PROFESSIONAL BLADE
LI-ION BATTERY
FAST CHARGE: 1.5 HOURS
WORK TIME: 90 MINUTES
U-1176
Instruction Manual
U-1176 Beard Trimmer for Men
Our
products are desinged to meet the highest standard of qualit, functionality
and design. We hope you enjoy using your new appliance. Please read the
instructions for use carefully and keep in a safe place for future reference.
CAUTION
Use this appliance only for it’s intended use as described in this manual.
DESCRIPTION
- full size trimmer
- ON/OFF switch
- Intelligent digital display screen
- design trimmer
- precision trimmer
- Nose/ear trimmer
- micro shaver
- body trimmer
- full size combs a-d. precision comb e.
- stand base
- cleaning brush
- USB cable(5A 1A charger applicable)
specification
Products: intelligent body care kit
Model: U-1176
Battery type: li-ion battery
Charging time: 1.5 hours
Use time: 90 minutes
Input: AC 110-240v ~ 50/60hz DC 5V 1A
Rated power: 5W
Production date: please see the product body
Standard: GB4706.1-2005
GB4706.9-2008
HOW TO MATCH THE APPLIANCE
Ways of replacement and installation
Remove the heads
Push the blades in the direction of the arrow shown in the figure(fig. 1-2)
Install the heads
Align the protruding part(fig. 3 2) of the blade with the body groove(fig. 3
1), press the blade in the direction of the arrow(fig. 4) 
Remove full size timmer combs
Lift from the bottom of the combs to remove as picture.(fig. 5-6) 
Install full size timmer combs
Align the guide comb(3/6/9/12mm) with the head, press down on the bottom of
the guide comb to install (fig 7-8) 
Install adjustable precision comb
Slide the comb from the top to the bottom of the head, adjustable in 4 levels
from 1-4 mm.(fig. 9)
Adjust body trimmer lengths
The body trimmer head includes 3mm/6mm /9rmrn, slide the head up and down to
adjust the lengths. (fig. 10) Remove foil head
Press the buttons on both sides and push forward to remove.(fig.11)
GETTING STARTED
Charging your prersonal groomer
Before using your personal groomer for the first time, charge for 2 hours,
Ensure the product is switched off.
Connect the charging adaptor to the product and then to the usb port.
The charging indicator willight up.
Your personal groomer cannot be overcharged. However, i the product is not
going to be used for an extended period time(2-3months), unplug it from the
mains and store. Fully recharge your personal groomer when you would like to
use it again.
To preserve the lfe of your batteries, let them run out every 6 months then
encharge for 14-16 hours.
4 length full size trimmer combs
| No. | Level | Length(mm) |
|---|---|---|
| 1 | 1 | 3 |
| 2 | 2 | 6 |
| 3 | 3 | 9 |
| 4 | 4 | 12 |
Adjustable precision trimmer comb
| No. | Level | Length(mm) |
|---|---|---|
| 1 | 1 | 1 |
| 2 | 2 | 2 |
| 3 | 3 | 3 |
| 4 | 4 | 4 |
Ways of cleaning the appliance
When cleaning the appliance, just separate the appliance, as the pic shows.
Then use the cleaning brush, clear the dust by cleaning the inside parts.
(fig.13-14)
Ways of cleaning the appliance
Usb cable charge and very convenient.(fig.15)
Insert the appliance plug directly into the body.(fig.16)
HOW TO USE
To thin and taper the beardimoustache(fig.21-22)
Attach a guide comb to full size trimmer. If you are trimmer for the first
time start with the maximum trimming length setting,
Turn the unit on.
Place the flat top of the trimmer comb against the skin.
Slowly slide the personal groomer through the hair. Repeat from different
directions as necessary.
If hair builds up in the trimmer comb during the trimming process, switch the
unit off, pull off the comb and brushirinse off.
To define the beard/moustache line(fig. 17-18)
Hold the personal groomer with precision trimmer blade facing you.
Start with edge of beard/moustache line and gently lower the trimmer blade
onto your skin. Use motions towards edge of beard/moustache ling to trim to
desired locations in facial area and away from beard in neck area
Trimming edge of sideburns(fig. 19-20)
Hold the personal groomer with precision trimmer blade facing you.
Start with edge of sideburn, and with the trimmer blades resting lightly
against your skin, use motions towards edge of sideburn line to. trim to
desired locations in facial area.
Using the micro shaver trimmer(fig.24)
Attach the micro shaver trimmer
Hold the groomer so the micro shaver gently touches your face in a 45 degree
angle.
Use short, well-controlled movements to shave around your beard/moustache.
Use your free hand to stretch your skin. This encourages the hair to stand
upright, making it easier to shave.
Note: the micro shaver was designed to shave the detail areas around your
beard/moustache/sideburns. It was not designed to shave your entire. Face.
For a close comfortable shave, guaranteed, use one of ante electric shaver.
To remove hair from nose and ear(fig.23)
Attach nose trimmer attachment.
Insert the personal groomer gently into nostril or ear.
Gently move the groomer in and out of the nostril or ear and at the same time
rotate.
Avoid inserting the cutting unit more than 6mm into your nostril or ear.
Attaching and removing the trimmer comb attachment
Note: always ensure the personal groomer is switched off before changing any
attachments.
Tips for best results
Beard, moustache and sideburn hairs should be dry.
Avoid using lotions before using your personal groomer. Comb your hair in the
direction that it grows.
Remove trimmer comb attachment if you are: defining hairline edges such as
sideburns, trimming the nape of your neck, trimming your beard line on front
of neck.
CARE FOR YOUR PERSONAL GROOMER
Cleaning and maintaining your personal groomer
After each use
- Tum the personal groomer off.
- Gently brush the remaining hairs away/rinse under warm water from the guide ‘comb and trimmer blade.
Cleaning cautions
Only the guide comb attachment and trimmer blade may be removed from the
product for cleaning.
Cleaning should only be done with a soft brush, such as the brush supplied
with the product.
Only use the light-grade oil supplied or sewing machine ol on the blades.
Do not use harsh or corrosive cleaners on the units or their blades.
The product can be washed all over the body, but please clean the water
droplets at the charging place before charging to avoid accidents.
Storage
Always store this appliance and cord in a moisture-free area. Do not store it
in temperatures exceeding 140 f (60°C).
Do not wrap the cord of the charging adaptor around the appliance.
IMPORTANT SAFETY INSTRUCTIONS
Warning-to reduce the risk of buns, electrocution, fire, or injury to persons:
An appliance never be left unattended when plugged into a power outlet.
Keep the power plug and cord away from heated surfaces.
Make sure the power plug and cord do not get wet.
Do ot plug or unplug the product with wet hands.
Do not use the product with a damaged cord.a replacement can be obtained via
our international service centres.
Charge, use and store the product at a temperature between 15°C and 35°C.
Always unplug from the mains when cleaning.
Only use the parts supplied with the appliance.
Keep this product out of reach of children. The use of this appliance by pers-
ons With reduced physical, sensory or mental capabiliies or lack of experie-
nce and Knowledge can give cause to hazards. Persons responsible for their
safety Should give explicit instructions or supervise the use of the
appliance.
**** PROTECT THE ENVIRONMENT
Do not dispose the trimmer in household waste at The end of it’s useful lfe.
Disposal can take place at our service centers or appropiate collection sites.
Caution: do not put i fre or mutilate your battery packs they may burst or
release toxic material.
**** Do not throw away the appliance with the normal household waste at the
end Of it life, but hand itin at an official collection point for recyciing.
By doing This, you help to preserve the environment(fig.25)
BATTERY REMOVAL
Lift the battery out of the housing by using a scissor cut down the connection
between the body and the power line. Twist the connecting wires until they’
break(fig.26)
The battery must be removed from the appliance before it is scrapped. The
battery is to be disposed of safely.
- Unplug groomer from outlet to avoid risk of electrical shock.
- With wire cutters, clip the wires leading to the batteries.
- Remove rear groomer cover by first prying the rebber panel from the prod-uct with a flat head screwdriver. Pry the on/off switch from the product by head screwdriver. Unscrew the upper housing by head screwdriver and pry the upper housing from the product with a flat head screwdriver. This will expose the batteries.
- Remove the batteries from the product. Contact your local authorities for proper dispoal.
Thank you for shopping at Ufree.
If you have any suggestions or questions about our productplease feel free o
send us an email. Ufree attach great importance to the customer experience. We
will help you solve it at the first time.
Email: service@ufree.net
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>