Unistrong UT55 Rugged windows Tablet User Manual
- June 5, 2024
- UniStrong
Table of Contents
UT55
Quick Start Guide
PANEL INDICATORS
PANEL INDICATORS
I/O COMPARTMENT LAYOU
INSERT/REMOVE SIM
This is how you insert and remove the micro SD/SIM
INSERT/REMOVE SSD
This is how you insert and remove the SSD You can use a T6 screwdriver to remove the four screws below the nameplate.
INSERT/REMOVE BATTERY
This is how you insert and remove the Battery
-
Turning the device on and off To turn on the device, firmly press and hold the bottom right [Power Button] until the boot screen appears.
To turn off the device, Click on the bottom left [windows icon] to display the options menu. Select the Power off option to shutdown. With the device turned on, press the [Power Button) to turn off the screen and go into sleep mode; Press the [Power Button) again to wake the device, swipe upwards on the screen to unlock; If the device has been idle for a period of time, the screen will automatically turn off and go into sleep mode. -
Home screen operation
• From the home screen, you can view the device status and access the applications.
• At the bottom of the home screen is the status bar,
• which contains the notification area, the status area and the display area; the shortcut panel is at the bottom as shown in Figure 3.
• Customize the shortcut panel
• Using applications The main screen to see all the included applications. Double-click to open applications, Click right Angle X to close applications
• Flat panel mode switch\ network connection\ Set up the Click the icon in the lower right corner, Select relevant content respectively as shown in Figure 4.
- Fix the application to the start menu/start screen How to do it: right-click the application item on the left – select “fix to start screen” on > and the application icon or tile will appear in the right area.
- Fix the application to the taskbar Right-click an application item in the start menu – > select “pin to taskbar” More content is displayed in the lower left corner of the start menu More folders can be displayed in the lower left corner of the start menu, including downloads, music, images, etc
- Find applications quickly in the list of all applications Enter the required program in the search box in the lower left corner
Notice
This device is restricted to indoor use where operated in the European.USA and canada Community using frequency in 5150MHz – 5250MHz to reduce the potential for interference. Restriction in BE, BG, CZ, DK,DE,EE,IE,EL,ES,FR,HR,IT,CY,LV,LT, LU,HU,MT,NL,AT,PL,PT,RO,SI,SK,FI,SE,UK
| BE| BG| CZ| DK| DE| EE| IE| EL| ES| FR
---|---|---|---|---|---|---|---|---|---|---
HR| IT| CY| LV| LT| LU| HU| MT| NL| AT
PL| PT| RO| SI| SK| Fl| SE| UK| |
Notice
- Some special places, such as airports, hospitals, gas stations and other places, do not allow the use of electronic equipment. Please comply with the rules and do not use this product in these places.
- For your safety and the safety of others, please do not use this product while driving a vehicle.
- In order to avoid potential safety problems, do not put this product near the vehicle’s airbag.
- For your safety, please do not use this product during thunderstorms.
- Although this product is waterproof, do not leave this product for long periods of time in areas with water or moisture.
- This product has an operating temperature range of -10°C—+55°C and a storage temperature range of -30°C—+70°C. Extreme temperatures can affect the device’s performance and service life.
- Please use an original rechargeable lithium battery. Low-quality batteries will affect the performance and service life of the device, and may even have the danger of explosion.
- Although the product has been tested to withstand harsh operating environments, do use the product in an improper manner.
- Please do not disassemble this product. In case of failure, please send to our authorized service centres to proceed with repairs.
- After the device has reached the end of its service life, please discard in a proper way to avoid environmental pollution.
- When replacing the battery or during the use of an external power supply, shut down the device completely before removing the battery or disconnecting the external power supply to prevent damage.
- This product is a Class B product, which may cause radio interference. The user may be required to take necessary preventive measures.
Battery Instructions
- This product uses a rechargeable lithium battery as a power source. When the power is low, please charge the battery. To maintain battery life, it is recommended to deplete the battery’s power before charging.
- When the battery charger is not in use, please remove it from the power supply. Do not connect the charger to the battery for more than one week. Excessive charging will shorten the battery life.
- Temperature affects the battery charging limit. Therefore, the battery may need to be cooled or warmed up before charging.
- Please use the battery for its original intended purpose to prevent shod-circuiting the battery. A short circuit will occur when a conductive material connects the battery’s positive and negative terminals.
- Do not use a battery that is damaged.
- Placing the battery in extremely cold or hot places will lead to shortened battery life. Exposing the battery to extreme temperatures may cause the phone to malfunction, even if the battery is fully charged.
- Do not put the battery in a fire. Please discard the battery in a proper manner or take the battery to a battery recycling station. Please dispose waste batteries in accordance with local laws and regulations.
Importer : UniStrong APAC Pte Ltd
51 Ubi Ave 1 #01-22 Paya Ubi Industrial Park Singapore 408933 +65 62968238
Manufacturer : Shenzhen UniStrong Science & Technology Co.,Ltd.
B Zone, No.4-4 Workshop Zhengcheng 2nd Road, Fuyong Street,Bao’an District,
Shenzhen City, Guangdong Province, P.R. China
NOTICE: The SAR limit of FCC and ISED is 1.6 W/kg averaged over one gram
of tissue. Device types UT55( FCC ID:2AOPD-UT55 and IC:11546A-UT55) has also
been tested against this limit. The highest SAR value reported under this
standard during product certification for use on the body is0.795 W/kg. This
device was tested for typical body -worn operations with the back of the
Device Keep 0 cm from the body. To maintain compliance with FCC and ISED RF
exposure require-ments,use accessories that maintain a 0 cm separation
distance between the user’s body and the back of the Device . The use of belt
clips, holsters and similar accessories should not contain metalliccomponents
in its assembly. The use of accessories that do not satisfy these requirements
may notcomply with FCC and ISED RF exposure requirements, and should be
avoided.
Working Temperature: -10°C – +55°C
Storage Temperature: -30°C – +70°C
Charging mode need to operate indoors, please pay attention to the environment
temperature should be -0°C – +40°C
CAUTION
ISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS
Hereby, [Shenzhen UniStrong Science & Technology Co.,Ltd.] declares that the
radio equipment type [UT55] is in compliance with Directive 2014 / 53 /EU. The
full text of the EU declaration of conformity is available at the following
internet address: http://en.unistrong.com/declaration.html
N0’TICE : This device complies with Part15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subjectto the following two conditions:
- this device may notcause harmful interference, and
- this device mustacceptany interference received, including interference that may cause undesired operation.
NOTICE: Changes or modifications made to this equipment notexpressly
approved by Shenzhen UniStrong Science & Technology Co.,LtrJ. may void the FCC
authorization ID operate this equipment
NOTE: This equipment has been tested and found ID comply with the limits
for a Class B digital device, pursuanttn Part15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installe d and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will notoccur in a particular
installation. If this equipmentdoes cause harmful interference to radio or
television reception, which can be determined by timing the equipment off and
on, the user is encouraged to try to correctthe interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connectthe equipment into an outieton a circuitdifferentfrom thattn which the receiver is connected.
- Consultthe dealer or an experienced radio/UV technician for help.
NOTICE: This Class [B] digital apparatus complies with Canadian ICES
-003.
RF mode and power tune-up refer to appendix A