Xing Da Electronics XO-9969 UV box with wireless charger Instruction Manual

UV box with wireless charger
Instruc on Manual
XO-9969

READ ALL INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP THIS MANUAL

In the Box

• XO-9969 UV box with a wireless charger (x1)
• Power Cable (x1)
• User Manual (x1)

Safety Precautions

• This product is NOT a toy, keep away from children and pets.

• Only use the device according to the instructions in this manual.
  Never use the device for anything other than its intended purpose.

• This device is NOT a substitute for proper medical equipment or attention.

• ONLY use the supplied power cable.

• Do not open this product or attempt to repair the unit yourself if it is not working properly. Doing so risks fire, shock, or injury.

• The device contains a safety feature that powers it off automatically when the cover is opened. Do NOT disable this safety feature.
  Never allow UV-C light to shine on the eyes or on the skin.

• When not in use, the device should be stored in a dry, cool location, away from sources of water or heat.

• Do not expose the device or power cable to extreme temperatures (heat or cold), open flames, or humid or wet conditions.

• Do not submerge in water. Do not use it in a location where the device or power cable could fall into the liquid.

• Unplug the charging cable when not in use. Do not pull the charging cable to disconnect, or use the cable as a handle.

• Do no use if the device or power cable is damaged. If a device or power cable is damaged, it MUST be serviced or replaced by the manufacturer or its service agent before using it again.

• Do NOT place any metal object onto the charging pad.

• Magnetic strip cards, including credit cards, phone cards, identification cards, and boarding passes may be damaged by the magnetic field if placed on or near this device.

• Do not place this device on or near a microwave or similar kitchen appliance.

Connecting to Power

• Place the UVC chamber on a flat, solid, stable surface.
• Plug the small connector of the included power cable into the power port on the back of the UVC chamber.
• Plug the large connector into a USB power source, such as the USB port on a computer, or into a compatible 5V/2A USB adapter (not included) and plug into a wall socket.

Using the UV Sanitizer
Set up the sanitizer & connect to power. Open the cover of the sanitizer from the front, and place the device you would like to clean inside of the sanitizer. Close the lid.

The UV sanitizer has two sanitization modes: Fast Sanize mode and Deep Sanize mode.

• Press the [Power] button once to start Fast Sanitize.

• Double press the [Power] button to start Deep Sanitize.

• When Fast Sanize mode is activated, the LED indicator on top will turn BLUE, and the sanitizer will sterilize for the next 90 seconds.
  When it is finished, the LED indicator will flash BLUE 3 times then will turn off.

• When Deep Sanize mode is activated, the LED indicator on top will turn GREEN, and the sanitizer will sterilize for the next 5 minutes. When it is finished, the LED indicator will flash GREEN for 3 times then will turn off.

• The charging LED on the power case will flash RED when charging and stay solid RED when fully charged.

Once the UV sanitizer completely finishes sanitizing, open the lid, flip your device over, and repeat the sanitization process again for the other side of your device.
Cau on: This device is designed to limit human & animal exposure to UV-C light, as it is harmful to skin and eyes. This device is equipped with a safety feature that automatically shuts the UV-C light off when the lid is opened.

Using Wireless Charging

• Connect to power. The wireless charging LED indicator will flash RED and BLUE 3 times, then turn RED to indicate the wireless charging is in standby mode.
• Place your Qi-enabled device on top of the cover. The wireless charging LED indicator will turn BLUE to indicate that your device is charging properly.
• If your device does not begin to charge, try repositioning your device on the charging pad. You may need to remove your smartphone case to charge properly.
• When your device is fully charged, the wireless charging LED indicator will turn OFF. Disconnect and unplug the charging pad.

Note on Safety Features:

• The device will automatically power OFF when it is overheated, or when a metal object such as a coin is placed on the charging pad.
  The wireless charging LED indicator will flash BLUE to warn of automatic shutoff.

Tech Specificaons

FCC Information
This device complies with Part 15 of the FCC Rules.
Caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

This device complies with part 15 and part 18 of the FCC Rules.
Operation is Subject To the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and any other radio device.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Made in China

Documents / Resources

| Xing Da Electronics XO-9969 UV box with wireless charger [pdf] Instruction Manual
XO-9969, XO9969, 2ADK3XO-9969, 2ADK3XO9969, XO-9969, UV box with wireless charger, box with wireless charger, wireless charger, charger
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>